Question about 2005 Jeep Liberty

2 Answers

Can you tell me what p0463 code means on my 2005 Liberty

Gas Gage reads empty after I filled up and check engine light is on.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 318 Answers

P0463 is a self diagnostic code that is for the fuel gage sending unit located inside the fuel tank if your fuel gage is reading empty just after you filled it then that verify's the code is correct you have a bad sending unit

Posted on May 31, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 316 Answers

P0463 = fuel level sending unit volts too high.
Fuel level sensor input above acceptable voltage, or circuit shorted to voltage between PCM and fuel gauge sending unit.

Posted on May 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0463 is code i got is car safe to drive seems to be running great 2005 jeep liberty


It should be okay to drive. 0463 is fuel level sensor circuit high input- the low fuel level sensor in the gas tank is acting up.

Nov 03, 2013 | 2005 Jeep Liberty

1 Answer

Codes p0463 and p0700


P0463 relates to circuit high input for fuel level sensor

P0700 Is a MIL request - control system for transmission

Feb 09, 2012 | 2005 Dodge Dakota

1 Answer

Have code 0463 fuel levelcircut input high what do I look for


There is no module under the dash on your vehicle .
P0463 - Fuel Level Sensor A Circuit High Description: The powertrain control module (PCM) monitors the fuel level input (FLI) circuit for electrical failure. The test fails when the signal moves above the maximum allowable calibrated parameter for a specified fuel fill percentage in the fuel tank. Possible Causes:
  • Fuel pump (FP) module concern
  • Incorrectly installed fuel gauge
  • Damaged instrument cluster
  • FLI shorted to VPWR
  • CASE GND circuit open
  • Overfilled fuel tank
  • Damaged fuel gauge
Diagnostic Aids: See the diagnostic aids for DTC P0460. Application Key On Engine Off Key On Engine Running Continuous Memory Ranger GO to Pinpoint Test HX . All others Refer to the Workshop Manual Section 413-01, Instrument Cluster for fuel level indicator diagnosis.
You start by taking to Dealer or someother qualified repair shop .
Instrument Cluster Diagnostic Trouble Code (DTC) Index DTC Description Source Action B1202 Fuel Sender Circuit Open Instrument Cluster Go To Pinpoint Test B . B1204 Fuel Sender Circuit Short to Ground Instrument Cluster Go To Pinpoint Test B .

Aug 02, 2017 | 2006 Ford Taurus

1 Answer

My gas guage is not work right


Most likely the cause is a bad sending unit. If the check engine light is on and the code reads p0463 you have a bad sending unit. Malibu is known for that.

Jan 17, 2011 | 2005 Chevrolet Malibu

2 Answers

My service engine soon light came on and my gas gage dropped below empty and gas light came on. I stopped and filled up and the gas light stayed on for another 50 miles. The service engine light is still...


It would be nice to know why the service engine light came on and is still on. An auto mechanic can read the code for you, or a dealer, or some parts stores will sell a device to read the code that caused the light to come on.

Dec 23, 2017 | 2007 Nissan Frontier SE Crew Cab

1 Answer

2005 jeep liberty has an engine light (yellow)staying on checked it out and checked fuel cap it is tight... now I have a knock or tick in the top of the engine... any help?


oil check oil. when light on dash comes on that means your jeep has a code for ya. take to auto zone and they will read the code for free with a code reader.

Feb 12, 2010 | 2005 Jeep Liberty

2 Answers

Even with a full tank my 2005 Envoy XUV fuel light stays on and fuel gauge marks empty


u need to change this gauge or try to dissasseble and clean it very well then try to install it back again

Jun 06, 2009 | 2005 GMC Envoy Xl

1 Answer

Gas gage constantly says full when it's not!


Unfortunately this is most likely the fuel pump module, which includes the fuel level sensor also. This should be diagnosed more thoroughly with a scanner, a good scanner will be able to check instrument cluster separately to confirm the gage is working right,and check for trouble codes that may not light any warning lamps. Hope this helps. Rate me please.P.S. Dont use that fuel station any more.

Jan 21, 2009 | 2002 Chevrolet Malibu

Not finding what you are looking for?
2005 Jeep Liberty Logo

1,876 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...