Question about 1996 Plymouth Breeze

1 Answer

How many bolts are on my starter? We have located one bolt but what if you can't find the second bolt?

Posted by on

  • Thomas Neubauer
    Thomas Neubauer May 11, 2010

    Keep looking :P

  • Greg Margossian
    Greg Margossian May 11, 2010

    What size motor is in the car?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

For the most part there is three bolts on the starter try these websites www.autozone.com and the other one is www.alldatadiy.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car.

Posted on May 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 2001 Town & Country, how do you locate & remove the bolts holding the starter? I can find one bolt, but I'm going nuts trying to remove the starter.


1. The Upper Bolt is easily accessed from the front of the vehicle going OVER the radiator. It is partially hidden by a black brace. There is a black ground wire going to where a nut(s) are located. This first nut will allow you to take off the ground connection, however the bolt has another nut further in (to the left) which is totally hidden. Remove this first nut.
2. After the first nut is off, remove the ground wire, then using a deep socket 15mm socket remove the second nut which is attached to the bolt.
3. Go under the vehicle to remove the wires from the Starter. The first wire is the positive cable (should be red) attached on the solenoid portion of the starter. That is a 13mm nut, Remove the nut and lock washer and detatch the wire. The second wire (single small gauge) goes to the solenoid and is connected using a slide lock - press release connection. It is difficult to see the slide lock and the press release located on the top side of the connection. Slide the red slide lock out and press the release, and pull out the connection straight out. Do not force it, or it may damage the connector. Note the placement of the bottom bolt position on the Starter. DO NOT remove the two (2) small, but long connector bolts on the wire connection end of the starter.
4. Remembering the noted postion: remove the lower 15mm bolt from the Starter. The bolt head is located on the back side of plate moving towards the left side of the Van. It is easily accessed from underneath in front of the transmission. Near the end of removing this bolt, support the starter or it will fall out.
5. Remove the Starter, noting the position of the starter. There should be a separate starter facing plate. If if didn't come down with the starter check up in the starter to flywheel opening and remove the plate.
6. Installation is Reverse of above. The facing plate is a little tricky getting it to stay in place. By starting with the bottom bolt it is easier, Make sure you continuously support the Starter in position to save crossthreading the bolt or starter. Hand tighten only the bottom bolt as youwnat to be able to turn the starter slightly to get the top bolt in.
Starter Bolts are tigthen to 35 ft-lbs.
Let me know if it helped or if you need additional help at fixya.com

Jun 15, 2010 | 2002 Chrysler Town & Country

1 Answer

Hi how do i get access to bolts to remove starter on a 97 voyager they seem to be behind the manifold & obscured by steering rack or am i not looking in right area? thanks mark hopkin


1. The Upper Bolt is easily accessed from the front of the vehicle going OVER the right side of the radiator. It is partially hidden by the exhaust manifold (front-to-back) and a black brace. There is a large gauge black ground wire going to where a nut(s) are located. This first nut will allow you to take off the ground connection, however the bolt has another nut further in (to the left) which is totally hidden. Remove the first nut.
2. After the first nut is off, remove the ground wire, then using a deep socket 15mm socket remove the second nut which is welded/attached to the bolt.
3. Go under the vehicle to remove the wires from the Starter. The first wire is the positive cable (should be red) attached on the solenoid portion of the starter. Remove the nut and lock washer and detach the wire. The second wire (single small gauge) goes to the solenoid and is connected using a slide lock - press release connection. It is difficult to see the slide lock and the press release located on the top side of the connection. Slide the red slide lock out and press the release, and pull out the connection straight out. Do not force it, or it may damage the connector. Note the placement of the bottom bolt position on the Starter. DO NOT remove the two (2) small, but long connector bolts on the wire connection end of the starter.
4. Remembering the noted postion: remove the lower 15mm bolt from the Starter. The bolt head is located on the back side of a plate moving towards the left side of the Van. It is easily accessed from underneath in front of the transmission. Near the end of removing this bolt, support the starter or it will fall out.
5. Remove the Starter, noting the position of the starter. There should be a separate starter facing plate. If if didn't come down with the starter check up in the starter to flywheel opening and remove the plate.
6. Installation is Reverse of above. The facing plate is a little tricky getting it to stay in place. By starting with the bottom bolt it is easier, Make sure you continuously support the Starter in position to save crossthreading the bolt or starter. Hand tighten only the bottom bolt as you want to be able to turn the starter slightly to get the top bolt in.
Starter Bolts are tigthen to 35 ft-lbs.
Let me know if it helped or if you need additional help at fixya.com

Feb 06, 2010 | Chrysler Voyager Cars & Trucks

1 Answer

I am looking for directions on changing the starter


1. The Upper Bolt is easily accessed from the front of the vehicle going OVER the right side of the radiator. It is partially hidden by a black brace. There is a black ground wire going to where a nut(s) are located. This first nut will allow you to take off the ground connection, however the bolt has another nut further in (to the left) which is totally hidden. Remove this first nut.
2. After the first nut is off, remove the ground wire, then using a deep socket 15mm socket remove the second nut which is welded/attached to the bolt.
3. Go under the vehicle to remove the wires from the Starter. The first wire is the positive cable (should be red) attached on the solenoid portion of the starter. Remove the nut and lock washer and detach the wire. The second wire (single small gauge) goes to the solenoid and is connected using a slide lock - press release connection. It is difficult to see the slide lock and the press release located on the top side of the connection. Slide the red slide lock out and press the release, and pull out the connection straight out. Do not force it, or it may damage the connector. Note the placement of the bottom bolt position on the Starter. DO NOT remove the two (2) small, but long connector bolts on the wire connection end of the starter.
4. Remembering the noted postion: remove the lower 15mm bolt from the Starter. The bolt head is located on the back side of plate moving towards the left side of the Van. It is easily accessed from underneath in front of the transmission. Near the end of removing this bolt, support the starter or it will fall out.
5. Remove the Starter, noting the position of the starter. There should be a separate starter facing plate. If if didn't come down with the starter check up in the starter to flywheel opening and remove the plate.
6. Installation is Reverse of above. The facing plate is a little tricky getting it to stay in place. By starting with the bottom bolt it is easier, Make sure you continuously support the Starter in position to save crossthreading the bolt or starter. Hand tighten only the bottom bolt as you want to be able to turn the starter slightly to get the top bolt in.
Starter Bolts are tigthen to 35 ft-lbs.
Let me know if it helped or if you need additional help at fixya.com

Jan 17, 2010 | 2002 Dodge Grand Caravan

1 Answer

Starter replacment instructions


1. The Upper Bolt is easily accessed from the front of the vehicle going OVER the right side of the radiator. It is partially hidden by a black brace. There is a black ground wire going to where a nut(s) are located. This first nut will allow you to take off the ground connection, however the bolt has another nut further in (to the left) which is totally hidden. Remove this first nut.
2. After the first nut is off, remove the ground wire, then using a deep socket 15mm socket remove the second nut which is welded/attached to the bolt.
3. Go under the vehicle to remove the wires from the Starter. The first wire is the positive cable (should be red) attached on the solenoid portion of the starter. Remove the nut and lock washer and detatch the wire. The second wire (single small gauge) goes to the solenoid and is connected using a slide lock - press release connection. It is difficult to see the slide lock and the press release located on the top side of the connection. Slide the red slide lock out and press the release, and pull out the connection straight out. Do not force it, or it may damage the connector. Note the placement of the bottom bolt position on the Starter. DO NOT remove the two (2) small, but long connector bolts on the wire connection end of the starter.
4. Remembering the noted postion: remove the lower 15mm bolt from the Starter. The bolt head is located on the back side of plate moving towards the left side of the Van. It is easily accessed from underneath in front of the transmission. Near the end of removing this bolt, support the starter or it will fall out.
5. Remove the Starter, noting the position of the starter. There should be a separate starter facing plate. If if didn't come down with the starter check up in the starter to flywheel opening and remove the plate.
6. Installation is Reverse of above. The facing plate is a little tricky getting it to stay in place. By starting with the bottom bolt it is easier, Make sure you continuously support the Starter in position to save crossthreading the bolt or starter. Hand tighten only the bottom bolt as youwnat to be able to turn the starter slightly to get the top bolt in.
Starter Bolts are tigthen to 35 ft-lbs.
Let me know if it helped or if you need additional help at fixya.com

Dec 31, 2009 | 1997 Plymouth Voyager

1 Answer

Starter


1. The Upper Bolt is easily accessed from the front of the vehicle going OVER the right side of the radiator. It is partially hidden by a black brace. There is a black ground wire going to where a nut(s) are located. This first nut will allow you to take off the ground connection, however the bolt has another nut further in (to the left) which is totally hidden. Remove this first nut.
2. After the first nut is off, remove the ground wire, then using a deep socket 15mm socket remove the second nut which is welded/attached to the bolt.
3. Go under the vehicle to remove the wires from the Starter. The first wire is the positive cable (should be red) attached on the solenoid portion of the starter. Remove the nut and lock washer and detatch the wire. The second wire (single small gauge) goes to the solenoid and is connected using a slide lock - press release connection. It is difficult to see the slide lock and the press release located on the top side of the connection. Slide the red slide lock out and press the release, and pull out the connection straight out. Do not force it, or it may damage the connector. Note the placement of the bottom bolt position on the Starter. DO NOT remove the two (2) small, but long connector bolts on the wire connection end of the starter.
4. Remembering the noted postion: remove the lower 15mm bolt from the Starter. The bolt head is located on the back side of plate moving towards the left side of the Van. It is easily accessed from underneath in front of the transmission. Near the end of removing this bolt, support the starter or it will fall out.
5. Remove the Starter, noting the position of the starter. There should be a separate starter facing plate. If if didn't come down with the starter check up in the starter to flywheel opening and remove the plate.
6. Installation is Reverse of above. The facing plate is a little tricky getting it to stay in place. By starting with the bottom bolt it is easier, Make sure you continuously support the Starter in position to save crossthreading the bolt or starter. Hand tighten only the bottom bolt as you want to be able to turn the starter slightly to get the top bolt in.
Starter Bolts are tigthen to 35 ft-lbs.
Let me know if it helped or if you need additional help at fixya.com

Dec 10, 2009 | 1999 Plymouth Grand Voyager

1 Answer

I cant get the starter out of my 1999 caravan


1. The Upper Bolt is easily accessed from the front of the vehicle going OVER the radiator. It is partially hidden by a black brace. There is a black ground wire going to where a nut(s) are located. This first nut will allow you to take off the ground connection, however the bolt has another nut further in (to the left) which is totally hidden. Remove this first nut.
2. After the first nut is off, remove the ground wire, then using a deep socket 15mm socket remove the second nut which is attached to the bolt.
3. Go under the vehicle to remove the wires from the Starter. The first wire is the positive cable (should be red) attached on the solenoid portion of the starter. That is a 13mm nut, Remove the nut and lock washer and detatch the wire. The second wire (single small gauge) goes to the solenoid and is connected using a slide lock - press release connection. It is difficult to see the slide lock and the press release located on the top side of the connection. Slide the red slide lock out and press the release, and pull out the connection straight out. Do not force it, or it may damage the connector. Note the placement of the bottom bolt position on the Starter. DO NOT remove the two (2) small, but long connector bolts on the wire connection end of the starter.
4. Remembering the noted postion: remove the lower 15mm bolt from the Starter. The bolt head is located on the back side of plate moving towards the left side of the Van. It is easily accessed from underneath in front of the transmission. Near the end of removing this bolt, support the starter or it will fall out.
5. Remove the Starter, noting the position of the starter. There should be a separate starter facing plate. If if didn't come down with the starter check up in the starter to flywheel opening and remove the plate.
6. Installation is Reverse of above. The facing plate is a little tricky getting it to stay in place. By starting with the bottom bolt it is easier, Make sure you continuously support the Starter in position to save crossthreading the bolt or starter. Hand tighten only the bottom bolt as youwnat to be able to turn the starter slightly to get the top bolt in.
Starter Bolts are tigthen to 35 ft-lbs.
Let me know if it helped or if you need additional help at fixya.com

Dec 04, 2009 | 1999 Dodge Grand Caravan

1 Answer

How to change a starter in a 2007 town and


1. Disconnect the negative side of battery. 10mm ratchet.
2. Jack the front of the vehicle.
3. Use jack stands to support the vehicle. Do not use only the jack. I use the jack as a back up for the stands.
4. Chock/Block the rear wheels.
5. The Starter is located on the front side of the engine, just below the exhaust manifold near the transmission-flywheel housing.
6. Looking at the engine compartment from the left fender side of the van, there are two bolts (15mm) that need to be removed. One located at 10-11 o'clock position on the Starter and one at 4-5 o'clock position on the Starter.
7. The Upper Bolt is easily accessed from the front of the vehicle going OVER the radiator. It is partially hidden by a black brace. There is a black ground wire going to where a nut is located. This first nut will allow you to take off the ground connection, however the bolt has another nut further in (to the left) which is totally hidden. Remove this first nut.
8. After the first nut is off then using a deep socket 15mm socket remove the second nut which is attached to the bolt.
9. Go under the vehicle to remove the wires from the Starter. The first wire is the positive cable (should be red) attached on the solenoid portion of the starter. That is a 13mm nut, Remove the nut and lock washer and detatch the wire. The second wire (single small gauge) goes to the solenoid and is connected using a slide lock - press release connection. It is difficult to see the slide lock and the press release located on the top side of the connection. Slide the red slide lock out and press the release, and pull out the connection straight out. Do not force it, or it may damage the connector. Note the placement of the bottom bolt position on the Starter. DO NOT remove the tow (2) small, but long connector bolts on the wire connection end of the starter.
10. Remembering the noted postion: remove the lower 15mm bolt from the Starter. The bolt head is located on the back side of plate moving towards the left side of the Van. It is easily accessed from underneath in front of the transmission. Near the end of removing this bolt, support the starter or it will fall out.
11. Remove the Starter, noting the position of the starter. There should be a separate starter facing plate. If if didn't come down with the starter check up in the starter to flywheel opening and remove the plate.
12. Installation is Reverse of above. The facing plate is a little tricky getting it to stay in place. By starting with the bottom bolt it is easier, Make sure you continuously support the Starter in position to save crossthreading the bolt or starter. Hand tighten only the bottom bolt as youwnat to be able to turn the starter slightly to get the top bolt in.
Starter Bolts are tigthen to 35 ft-lbs.
I hope this helped. Let me know if it helped or if you need additional help. Happy Thanksgiving!!

Nov 26, 2009 | 2002 Chrysler Town & Country

1 Answer

How to change starter


1. The Upper Bolt is easily accessed from the front of the vehicle going OVER the right side of the radiator. It is partially hidden by a black brace. There is a black ground wire going to where a nut(s) are located. This first nut will allow you to take off the ground connection, however the bolt has another nut further in (to the left) which is totally hidden. Remove this first nut.
2. After the first nut is off, remove the ground wire, then using a deep socket 15mm socket remove the second nut which is welded/attached to the bolt.
3. Go under the vehicle to remove the wires from the Starter. The first wire is the positive cable (should be red) attached on the solenoid portion of the starter. Remove the nut and lock washer and detatch the wire. The second wire (single small gauge) goes to the solenoid and is connected using a slide lock - press release connection. It is difficult to see the slide lock and the press release located on the top side of the connection. Slide the red slide lock out and press the release, and pull out the connection straight out. Do not force it, or it may damage the connector. Note the placement of the bottom bolt position on the Starter. DO NOT remove the two (2) small, but long connector bolts on the wire connection end of the starter.
4. Remembering the noted postion: remove the lower 15mm bolt from the Starter. The bolt head is located on the back side of plate moving towards the left side of the Van. It is easily accessed from underneath in front of the transmission. Near the end of removing this bolt, support the starter or it will fall out.
5. Remove the Starter, noting the position of the starter. There should be a separate starter facing plate. If if didn't come down with the starter check up in the starter to flywheel opening and remove the plate.
6. Installation is Reverse of above. The facing plate is a little tricky getting it to stay in place. By starting with the bottom bolt it is easier, Make sure you continuously support the Starter in position to save crossthreading the bolt or starter. Hand tighten only the bottom bolt as you want to be able to turn the starter slightly to get the top bolt in.
Starter Bolts are tigthen to 35 ft-lbs.
Let me know if it helped or if you need additional help at fixya.com

Nov 22, 2009 | 1999 Plymouth Grand Voyager

1 Answer

Starter location and layout, can't find second bolt


The second bolt for the starter is directly above the starter the trick is you have to get from the top of the engine and ive learned thats its much easier if you take the driver side fan shroud out of the way it gives you much more room to work

Jun 25, 2009 | 2001 Chrysler Town & Country

1 Answer

Replacing the starter on 2001 Dodge Grand Caravan


with most front wheel drives you must remove the passenger tire and reach through to the starter bolt with an extension and if I remember write with a 15 mm socket you can reach through and take out the bolt

Jun 20, 2009 | 2001 Dodge Caravan

Not finding what you are looking for?
1996 Plymouth Breeze Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...