Question about 1997 Volkswagen Golf

2 Answers

Think it could be fuel shut off valve but dont know which one it is as haines manuel shows different pumpalso wiring diagram is different to my car

No fuel coming out of pump to injectors fuel in tank and can see it to pump but will not come out to injectors also haines manuel doesnt have my pump it is the one used in the caddy van or seat ibiza diesel many thanks Andy

Posted by on

  • yadayada
    yadayada May 11, 2010

    VW's don't have a fuel shut off, u have a defective fuel pump in the gas tank.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 767 Answers

Probably the switch at the injector pump may be faulty thus not opening to allow the diesel, check tht switch you should get a click sound once you turn the ignition 'on'.
Hope this helps!

Posted on May 31, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 179 Answers

Fuel pump bad not creating enough pressure also could be bad injecters try the cheapest solution first

Posted on May 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a wiring diagram for map sensor in 2006 Jeep Liberty 4x4 3.7L


Go to autozone and ask for the wiring diagram. They will print one for you for free. If you dont have an autozone near you try another parts store. If you purchase a haines of chiltons manual ($25 in a retail store or $18 on amazon), it will have a detailed wiring diagram of the MAP sensor.

Good Luck!

Jul 13, 2014 | 2002 Jeep Liberty

1 Answer

Thanks jamie for your feed back. what u said to check has been done. could it be the fuel shut off valve? is so could it be by passed?


Don't know what Jamie answered-- but only Ford Products
have Fuel Safety Shut Off Switches

Keep in mind those switches only activate in a serious crash,
so you have to know the fuel system & have wiring diagrams,
to have a place to start testing

Nov 18, 2012 | Cars & Trucks

1 Answer

I replaced the fuel pump, harness, filter, distributor ,cap ,rotor, and relay. my 96 chevy suburban still doesnt start. i dont hear the fuel pump motor but the relay is working. dont know what to do n


BYM, Back Yard Mechanic...You will need a Mechanics Manual...Chilton's, Haines, or OEM...Look thru the wiring diagrams, BEFORE you start dicing, and splicing...as far as your real problem...did you replace the Ignition Control Module, that is inside the Distributor cap??? It's Black, and has several wires that attach to it...those are the 1st thing you want to look at, before you start messing with the fuel delivery system, Buy A New ICM, or 2, and replace it, it's good to keep a spare around (in your vehicle). You will need a 7 mm socket, w/extension, and obviously, a driver of some sort, ratchet, or nut driver type. Good Luck.

Jul 18, 2012 | 1996 Chevrolet Suburban

1 Answer

Hey there! my name is ashley and i have 1986 nissan XE 720 z24. one day the tach, speedometer, and turning signals quit working. also something is draining the battery. the same day the electrical problems...


check fuses inside truck . If any dought change it cause sometimes they are hard to tell. I have a 1986 nissan hardbody 4x4 myself.Buy yourself a haines manuel cause the fuel system is pretty weird . good luck i stop by and check out the nissan questions everyday,almost.

Apr 14, 2011 | 1986 Nissan Pickup 4WD 1986

1 Answer

Where is the diagram of the fuse box of nissan 1994 mini?


haines or chilton manuel from parts store.has every diagram and every detail about the car.cost about 20 dollars. monry well spent

Dec 23, 2010 | 1994 Nissan Sentra 4-Door

1 Answer

I need a transfercase diagrame for a 2000 dodge dakota 4x4 4.7L


try a haines or chilton manuel from parts store.. best 20 dollars you will ever spend

Dec 23, 2010 | Dodge Dakota Cars & Trucks

1 Answer

1987 mighty max emission control diagram.


haines or chilton manuel at parts store has everything there is to know,including every diagram... best 20 dollars you will ever spend

Dec 23, 2010 | 1987 Mitsubishi Mighty Max

1 Answer

I need heater hose routing diagram straight 6


goto an autoparts store and pick up a haines manuel or see if they can print you out 1,autozone can do this for you

Jan 12, 2010 | 1990 Jeep Cherokee Limited

1 Answer

Have a 1997 gmc k1500,5.7liter tbi.starts fine runs a few min.then stalls,have no codes coming up on the scanner,fuel pump does hum when you turn key on,changed fuel filter,checked dist cap and wires,dont...


Check the fuel pressure at the shredder valve, the valve is along the fuel line by the distributor cap and there should be 62 to 65 PSI. Anything different will give you a not start or run, The other things too that would stall the engine would be a faulty oil pressure sending unit, anything less then 4 psi will shut the engine down and a faulty ignition module will do this too. Once the module heats up it fails, it's common for moisture to develop in the distributor and corrosion occurs to the wires leading to the module. Start with the simple and check the fuel pressure and then to the gauges, like the oil and then the ignition module. Good luck and keep me posted, be glad to help you resolve the issues to your GMC.

Nov 05, 2009 | 1994 GMC Sierra

Not finding what you are looking for?
1997 Volkswagen Golf Logo

669 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...