Question about 2003 Ford F250 Super Duty Crew Cab

1 Answer

Replce cornering light? 2003 ford f250 superduty

How do i replace cornering light on 2003 f250 superduty

Posted by on

  • Thomas Neubauer
    Thomas Neubauer May 11, 2010

    front or rear?

  • tiptoe846 May 11, 2010

    Add what model other than a 2003 F250 as there are different set ups. If you have no joy check online for the same corner light, try to get a photo of a good close up shot. As mentioned they do vary. Some have clip on lugs & screws - others just screw - locator holes with screw. So if you locate a photo shot from behind that'll give you an idea. There may be a couple of 8 10 or 12mm bolts instead of screws. Good luck

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 437 Answers

Posted on Jun 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have no gauges & alternator is out on a 2003 ford f250 superduty


There is a 10amp fuse for the gauges and the circuit that turns on the alternator. I think the fuse is in the engine compartment fuse box but your owners manual would tell you for sure.
You need to know if that circuit has power with the key switch on.
The wire going from the fuse to the instrument cluster is red and yellow and the wire between the cluster and the alternator is lite green and red.

Feb 09, 2013 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

2003 ford f250 superduty xl wont start


This could be the Inertia switch is active. There is a reset button on it. Usually this is placed by the front floor kickpad. Since you have access to the internet, type in your vehicle and the word "inertia switch" and you might find a video about resetting your part. Also it will show you some autoparts photos of this part.

Nov 13, 2012 | 2003 Ford F250

1 Answer

The right rear turn/brakelight not working on my 03 f250 superduty.the running light still works.this leads me to believe it is not a faulty wire.i changed the socket with a factory replacement from...


Maybe I'm missing something, but have you tried replacing the bulb? Sounds like you have a dual-element bulb, where the flasher (high intensity) element is out but the normal low-intensity element is still OK. Had the same thing happen on my Buick.

Feb 26, 2011 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Everytime I hit a bump I hear a clunk in the front end of my 2003 ford f250 superduty. I've changed all ball joints, the tie rod attached to the pitman arm. It also has unstability in the steering. It...


I'd be inclined to check the suspension. Jack vehicle up so wheels hang free & check the mountings, springs/shock absorbers, & sway bar.
Also 'bounce' the vehicle at each corner in case a shockie has internal problems,


May 27, 2010 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Where is the location of a speed sensor on a 2003 Ford F250 superduty?


It should be sticking out of the top of the transmission at the rear of the unit. There are 2 sensors, 1 at front of unit (TSS) and one at the rear of the unit (OSS). The OSS is your speedometer related sensor.

Assuming 2wd auto

Jan 20, 2010 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

I WOULD LIKE TO KNOW THE PROCEEDURE FOR REPLACEING THE COIL ON THE #3 CYLINDAR IN A 5.4 ENGINE OF A F-250 SUPERDUTY...NEVER DONE IT....THANKS ...2003 FORD


un-bolt the coil wich i think is a 6mm socket,unplug the plug,really easy...but if you are talking about the driver side,then you have to remove the power steering pump bracket

Aug 11, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

2003 Ford F250 superduty diesel 7.0L ,no start in cold


i would say your F250 has a {short circuit}going by all the facts you tell me there has to be a loose or faulty electrical connection in the ignition circuit.get it rechecked also check the main earth strap it could be broke/corroded.also check the main voltage regulator as this can cause this problem.hope this helps.adrian

Feb 25, 2009 | 2003 Ford F250 Super Duty Crew Cab

2 Answers

Need fusebox diagram for 2003 F250 superduty 4x4


I have a ford f 250 4x4 2003 and my horn doesnt work and the overhead compass/information instrument will not turn on. the airbag light blinks a few times them stays on. whats the deal?
GETTIN SIK OF LIGHTS ON OFF

Dec 11, 2008 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

2004 Ford F250 Superduty Truck Steering problems


I have had this same problem after thorough checking it ended up being a bad steering box. after replacing the box it was fine

Oct 20, 2008 | 2004 Ford F250

Not finding what you are looking for?
2003 Ford F250 Super Duty Crew Cab Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...