Question about 2002 Ford Ranger Regular Cab

2 Answers

Turn signals and hazard light don't work

For a few weeks, neither the the turn signals nor the hazard lights will work. The blinkers on the interior panel don't even show they are turned on. How could this be resolved?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

1st check the fuses, if they check ok , then check or replace the flasher unit (it is reletively inexpensive) you did not state what type of vehicle you have, but if that's it in the picture, have you done any towing with it ?

Posted on May 31, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 105 Answers

Try to wiggle hazard light button and see if they work if they work after wiggling the swtch is bad very common on fords if you need details an how to change let me know

Posted on May 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1991 celica and for some reason the front signals does not work at all. When I turn on the blinkers it blink really fast on both sides but hazard light works fine it blinks normal but it...


check the main earth wire near the battery. and one near the rear of the lights. unbolt them and clean the connectors up put some grease on them after. then check again. remember that when the earth wires come off the radio code will be needed to reset the the radio. be safe and take the battery off.

Sep 28, 2013 | Cars & Trucks

1 Answer

Turn signal hazard lights work but not running lights


The parking lights should be on a different circuit from turn signals - hazard lights. The bulbs usually have two filaments, one for each circuit.
On most models there is a tail light fuse and relay that handles front and rear parking lights.

Jun 28, 2013 | Toyota Tacoma Cars & Trucks

2 Answers

2005 Ford Focus- Blinkers, Brake lights and hazards don't work -just change the bulbs and they still don't work. Help!


That should be on two different fuses, but everything goes thru the turn signal switch.
The switch might be faulty. A mechanic would check for voltage there.

Jul 11, 2012 | Ford Focus Cars & Trucks

1 Answer

No break lights, blinkers or hazzards. I changed the fuses. That wasn't it. Still No breaks, blinkers or hazards. Where is the relay?


I would check the turn signal/ hazard flasher module, its on the brake pedal bracket, 5 wires, turn the hazards on and give the side of it a few raps with a screwdriver and see if it starts flashing. The PINK should have 12v. If that checks out good it may need the turn signal switch. At the turn signal switch there is a WHITE wire that should have 12v when the brake is depressed, then you should have 12 on the DARK GREEN and the YELLOW wires coming out. If the center high mounted light works, then the brake switch at the pedal is good.

Nov 19, 2010 | 2002 Pontiac Sunfire

1 Answer

When the blinker is flipped up or down on the column the tail lights dont respond. But the brake lights and the hazards still work fine. Whats the problem?


The turn signal flasher relay may have a problem.Turn on the hazards and follow the clicking sound to the source and usually the hazard flasher and turn signal flasher are very close to each other.Remove the one that is clicking and put it in place of the turn signal flasher.If the Turn signals then work you will need to purchase a new turn signal flasher relay.They are usually just a few dollars.

Jul 29, 2010 | 1986 Ford F 250

2 Answers

Turn signal doesn't come on until I hit my hazard light on & off


it could be duel filament bulb that is blown and shorting inside the bulb to the other circuit, you may need to remove all indicator and hazard bulbs and check. I would also try a new flasher can

Apr 17, 2010 | 2003 Chevrolet Impala

2 Answers

Blinker wont work, but the hazards do


There are two thermal flashers one for the Hazard Warning Lights and one for the Turn signal lights. It could be the flasher for the turn signals.

Oct 26, 2008 | 1998 Jeep Grand Cherokee

Not finding what you are looking for?
2002 Ford Ranger Regular Cab Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...