Question about 2002 Lincoln Continental

1 Answer

Window on passenger side will not come down need door panel instructions.

Instructions on how to remove the front door panel on passenger side of a 2002 lincoln continental window onpassenger don't come down . need information how to remove the door panel.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Remove interior door panel 2002 Chevy tracker


No you don't need any special tool . Find all screws on out side of door trim panel and the window handle , the mirror cover plate , then just pull on edge of the panel .
Gently pry the front side door trim panel (3) from the front side door by disengaging the plastic retainers which secure the panel.
Position the door trim panel (3) away from the door in order to gain access to the front side window switch electrical connector, if equipped.
Disconnect the window switch electrical connector, if equipped.
Remove the door trim panel (3) from the vehicle.
Remove the front side window switch from the door trim panel (3) by releasing the 4 plastic retaining tabs, as needed.

Use a cloth in order to pull off the snap ring which secures the front side door window regulator handle (1), if equipped.
Remove the window regulator handle (1), if equipped.
Remove the front side master window switch, if equipped. Refer to Power Accessory Switch Panel Replacement .

Remove the front side door inside handle (1). Refer to Front Side Door Inside Handle Replacement .
Remove the outside rearview mirror opening cover (2).
Remove the screw which secures the front side door pull handle (4).

Front Side Door Inside Handle Replacement
Removal Procedure
Remove the screw which secures the front side door inside handle (1).
Slide the inside handle (1) forward in order to release the retaining tabs which secure the handle to the door.
Open the front side door inside handle rod retainer and remove the front side door inside handle rod from the inside handle (1).
Remove the inside handle (1) from the vehicle.

Check out youtube video showing how to do it !
How To Remove Install Front Door Panel Suzuki XL 7

Jun 10, 2017 | Cars & Trucks

3 Answers

Window wont go up and down


What you will need is a replacement Window Regulator. You should be able to find one online for around $50.00. Make sure you Order the correct one. Drivers Side Front..... Passenger Side Rear... Each would be different. Removing the inner door panel. Check for videos on Youtube for your model and year to watch step by step instructions. On a scale of 1 to 5 this would be 3 to replace. Removing the regulator and getting the new one into place can be tricky. Just take your time and pay attention to how you remove the old one and what bolts and screws go where.

Aug 18, 2014 | 2000 Buick LeSabre

1 Answer

Passenger side front window does not work.


Yea your right on that one, but to be sure test the regulator connector with a test light to be sure their is power getting to the motor. to remove the panel their will be a few screws around the panel and some snap clips on the back side of it, disconnect any connectors and be careful with the plastic clip for the door handle.

May 03, 2010 | 2005 Dodge Grand Caravan

1 Answer

How do i remove the passenger side front door panel on my 2000 va


All you have to do is unscrew everything on the outside of the panel, unscrew the lock thingy and lift up and away. I'm doing just that later myself. The motor still runs, but the window won't go down.

Feb 28, 2010 | 2000 Dodge Caravan

1 Answer

Front passenger window not working. Need instructions to remove door panel to access window motor.


It could be as simple as a fuze...or your power window switch needs to be cleaned.

If not

there should be screws located inside the handle and other areas on the door panel, undo all those first,
The door panel itself is held on with plastic clips, you can use a flat head screwdriver and gently start at the bottom of the panel/door and work your way around the door undoing all the plastic clips by pulling gentle.
Dont forget to unscrew your power window switch and unplug when removing the panel


Jan 29, 2010 | 2006 Dodge Grand Caravan

2 Answers

The passenger side front and rear power windows 2005 Lexus ES


IT CAN BE BROKEN WINDOW MOTOR YOU NEED TO REMOVE THE PANEL TO SEE IF YOU GOT POWER OR GROUND GOING TO THE MOTOR BUT BEFORE THAT I WOULD CHECK IF THERE NO BROKEN WIRE IN THE DOOR WHEN YOU OPEN THE THE DOOR WIRE MOVE AND AFTER TIME DOES WIRE CRACK AND BREAK THANKS PIERRE

Jul 30, 2009 | 2003 Lexus ES 300

1 Answer

2002 Cougar passenger side window switch - remove & replace


remove the door panel switch comes off from inside

Jul 23, 2009 | 2002 Mercury Cougar

1 Answer

Front windows don't go down


well you can take the door panels off using a philips. pry the little reflector off and remove the one philips in there. then by the arm rest remove that small piece with a lil screwdriver. 2 more bolts under there. remove lil triangle from top of door. then pull out on door panel. id use some jumper cables to make sure motor is working. start trying to elimanate the problem. may be window motor, switch, body control module or fuses

Jul 05, 2009 | 2001 Oldsmobile Alero

Not finding what you are looking for?
2002 Lincoln Continental Logo

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

fordexpert

Level 3 Expert

5471 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...