Question about 2002 Chevrolet Avalanche

1 Answer

The brake and ABS comes on while driving for awhile then turns off then comes back on...the code reading from general code reader says, "low oxygen

The brake and ABS comes on for awhile then turns off then comes back on...the code reading from general code reader says, "low oxygen" Help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Low oxygen has nothing to do with the ABS. That is something to do with the PCM. You will need to take it to the dealer with the correct scan tool to read the stored ABS codes.

Posted on May 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Speed Sensor (ABS Sensor) on my 02 Camaro (Passenger side rear) is shaved down. ABS thumps while driving and making right turns.


Most likely you have a defective ABS sensor which is part off the front bearing assembly. you will need have or if you have a code reader capable of reading abs codes find the wheel that is causing the code. Then source the part and if you have the ability to replace it replace it. The code/ light should go out when the abs signal is getting correct information.

Nov 09, 2013 | Chevrolet Camaro Cars & Trucks

1 Answer

ABS and brake light on


check brake fluid level, if its low light will come on

Sep 02, 2013 | 2003 Dodge Caravan

1 Answer

1999 Windstar drives fine for awhile then something starts to happen the abs light comes on the trak light comes on the lights won't go hi and low no backup lights the turn signal won't turn o


Just as a precaution, please check the brake fluid reservoir on that model. There is a sensor at the base of the master cylinder which can leak brake fluid over the wiring circuit, and cause the electrics to short out. In some extreme cases this has caused fires in some vehicles. This is why Ford had issued a recall to this particular model in the states at least.

Nov 13, 2012 | 1999 Ford Windstar

1 Answer

6 months ago, replaced head gaskets. 1 week later, service engine soon light came on. Tech said it was an oxygen sensor. Cleared code. 3 weeks ago, got oil change, replaced headlights and replaced...


CHECK TURN SIGNAL FUSE.IT COULD BE BLOWED OR YOU HAVE FAULTY TURN SIGNAL SWITCH.BECAUSE BACK LIGHTS AND TAIL LIGHTS SHARE SAME CIRCUIT WITH TURN SIGNAL SWITCH.

Jun 26, 2011 | 1999 Chevrolet Venture

1 Answer

My ABS light and emergency brake light comes on everytime I start my Ford Windstar, and they stay on when I'm driving around, even though my brakes are not on. Anyone have any idea what this means?


I think it means the Antilock Brake System is disengaged. So, a code has been stored in the abs computer. Standard obd tester cannot check these codes, must visit your dealer or some autoshop with ABS reader.

According with the service manual: During starting the RED brake light should briefly come on and then go off. If the RED light stays on, it indicates a problem in the main braking system, such as a low fluid level, or the parking brake is still on.

Hope helps (remember to rate and comment this).

Sep 14, 2010 | 2001 Ford Windstar

1 Answer

ABS light just came on, is it an easy fix. My abs warning light comes on often. It usually stays on until I restart the car, then it might stay off for days but will always relight. Often, I turn the...


The code scanner that you need is called ODBII code reader with ABS, and it works in the same way as the one that you connect to the car computer module (ECU) to read codes when the check engine light comes on, but the cheap ones that you can buy from $50 do not have the ABS brake scan function.

If the problem is the ABS, then it is often a wiring to abs problem, or a defective ABS control module, a scan reading is necessary to know what the problem is.

Below few examples of Code reader with ABS:

Equus 3150 Innova ABS + Professional CanOBD2 ...


$199.00 - Amazon.com


Cp9449 Brake Scan Abs Diagnostic Tool Obd2 ...


$219.67 - eBay


Equus 3160 Innova ABS + Professional CanOBD2 ... $259.99 - Amazon.com


CAN OBDII Code Reader with Multilingual Menu $49.99 - Harbor Freight Tools

Mar 24, 2009 | 2001 Chevrolet Blazer

Not finding what you are looking for?
2002 Chevrolet Avalanche Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...