Question about 1999 Chrysler 300M
How to replace inner tie rod bushing on chrysler 300M.How do you go about straitening those metal tabs that bend over the nut that holds the tie rod in place,there is not much room in there to give you any leverage to bend those tabs to get to the nuts.Is there any special to use?If so what is it?Thanks for your help. Dennis. i got the tabs down on my car but i can get any leverage to get the nuts off, what did u do?
I just did the inner tie rod bushings on my 1999 300M, piece of cake! Get a Chiltons, it tells you to remove the windshield wipers, the plastic cowl covers, and the strut tower brace (looks like part of the body at first but 4 bolts on either side and one in the middle and toss it to the side). Remove the air intake ducting, and your there like underwear.use a long screwdriver and a big hammer and tap the bottom tangs down, pry up the top ones (once you get it started enough to get a screwdriver under it its easy) then use a 7/8 socket, 3/4 drive breaker bar and unbolt. One bushing was still intact so I drove it out with a large socket and a small C-clamp. Getting the bolts back in the rack with the new bushings was the dirty little bastard of the whole thing ( I didn't center the steering rack like your supposed to do, because I thought I knew a better way, I wanted the rack as far to the passenger side as possible for more room to work). You have to fight with the steering rack boot to line everything back up. Even with wheels of the ground it made me use ALOT of foul language. Torque the bolts to 60 ft lbs and your golden. The whole thing took about an hour and a half (about 15 minutes of that was cussin'). I hope this helps someone.
Posted on Sep 07, 2009
According to the Manual @ Aldata this Procedure is Only Performed with the Rack removed from the Vehicle.
Can You get to them from Eng. Compartment @ Firewall?
Looks like you just Have to FIGHT with them. Sorry Not Much Help I Did Look it up @ Aldata
Posted on May 31, 2009
There is a special tool needed to remove and install the inner tie-rods. You should be able to rent the tool from AUTO-ZONE.
Posted on May 31, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
oh yes, this is a problem with most all chrysler cars, front wheel drive, they will not admit to it or fix the problem though. just give us 2 or $300 and we'll repair it. bs. you need a bushing replacement kit, autozone under 10 bucks. and a little patients. drop me an email and i will upload photos of steps and try to talk you through it. not that hard no special tools only took 45min. no charge of course. you have to stick it to the system some times.
Posted on Mar 18, 2009
Tips for a great answer:
Sep 28, 2011 | 1999 Chrysler 300M
Aug 15, 2011 | Chrysler 300M Cars & Trucks
Jun 25, 2011 | 2003 Mitsubishi Outlander
Jan 24, 2011 | 1999 Chrysler 300M
Sep 29, 2009 | 2003 Chrysler 300M
Jan 13, 2009 | 1994 Dodge Intrepid
Dec 09, 2008 | 1999 Chrysler 300M
Nov 17, 2008 | 1999 Chrysler 300M
Jan 09, 2017 | 1999 Chrysler 300M
1,952 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: