Question about 1989 Porsche 944
The compressor switch button in my porsche 944 is bad. I am looking for a way to bypass the switch button but not sure exactly how to do so. I know that I need to find what wires go to the switch and which come from it, and then connect them together. The problem is, the switch is on a circuit board and I am not sure how to locate the wires to and from it. I am trying to avoid buying a whole new climate control panel. Please Help!!
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a gear in the speedo that breaks. This is plastic gear on a metal shaft. The last fix I did was to remove speedo and open it up. I super glued the cracked gear to the shaft because I was unable to find a new one. It worked again with no future problems. I hope this helps.
Posted on Jan 30, 2009
SOURCE: 1985 Porsche 944
YES THIS IS THE FRONT MAIN BEARING SEAL, IF YOU HAVEN'T DONE THIS BEFORE I SUGGUST YOU TAKE IT TO A DEAL.. THEY CAN BE TRICKY..PROBLAY A COSTLY FIX.. GOOD LUCK KEITH..
Posted on Mar 12, 2009
There are three buttons, let's call them 1, 2, and 3, from left to right.
A. 12 AM, PM or 24.00 h
With the clock in the time readout mode, keep
button (2) depressed for 4 seconds -12 AM, PM
or 24.00 flashing. After pushing button (1), either
a 12-hour (AM + PM) or a 24-hour setting
program can be selected. If you only want to
change the display mode, push button (3). The
clock then returns to its normal timekeeping
Push button (2) a second time - hour display
flashes. Set hour by pushing button (1). After
pushing button (3)*, the clock returns to the time
readout mode with new hour setting.
Push button (2) once more - minute display
flashes. Set minute by pushing button (1). Upon
pushing button (3)*, the clock is started -
accurate to within 1 second.
Stop watch function
The stop watch can only be set in motion if the
clock is in its normal timekeeping mode and not
during setting operations.
A. Push button (3) - 00:00 display appears;
B. Push button (1) - stop watch is on;
C. Push button (1) a second time - watch stops.
(Additional times can be added by pushing button
(1) again - stop watch keeps running. Push button
(1) once more to stop timing.)
D. Push button (2) - 00:00 display appears;
E. Push button (3) - normal timekeeping mode.
If button (3) is pushed during operation A and
B, the setting procedure must be restarted
(push button (2)).
Posted on May 02, 2009
Tips for a great answer:
Aug 08, 2016 | 1983 Porsche 944
Oct 21, 2014 | 1987 Porsche 944
Mar 24, 2014 | 1983 Porsche 944
Feb 14, 2011 | 1987 Porsche 944
Dec 16, 2010 | 1985 Porsche 944
Sep 30, 2010 | 1985 Porsche 944
Aug 06, 2009 | 1987 Porsche 944
Aug 02, 2009 | 1986 Porsche 944
Jun 09, 2009 | 1984 Porsche 944
Jun 04, 2009 | 1987 Porsche 944
407 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: