At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
what type of car is it oldsmobile alero you turn the key on and wait the secuity light will quit flashing after a while and it will start bad egnitionswitch has a recall if not call dealer that handels that car and see if there is a recall
For some odd reason Chevy sometimes has there stereos connected to the security system. Check the fuse to make sure it didn't blow. You probably have vats security which is the worst thing ever made. I had that on my 02 firebird and had nothing but vats issues constantly.
rav4 reset maintenance light
pretty standard
hold trip A in with engine and key off while holding trip button in turn key and engine on.
keep holding trip button in until light stops flashing when it stops flashing then release the trip reset button this should clear the maintenance warning light. hope this helps
Which red light? The one on top of the dash? If so, there are two cases where that light will flash rapidly: If you use the wrong programmed key, it will immediately start flashing rapidly when you turn on the ignition and try to start the car. If the light is steady and then starts flashing rapidly after a few seconds when you turn on the ignition or try to start the car, you are using the correct programmed key but the engine computer has a problem or has failed.
It's an LED for an aftermarket alarm system, it means the alarm is armed, remove the key from the ignition and push the button on the back and hold it in, turn the key to on and wait until the light stops flashing, turn the key off and remove it, the next time you turn the key on the light should stay off
the flashing red light comes on after a minuite of removing the key from the ignition or locking the car, the light is the immobiliser light, when this light is flashing the immobiliser is active, when put the key into ignition and turn on the ignition the immobiliser will turn off if its the correct key.
×