Question about 1999 Mercedes-Benz Mercedes Benz Sl Class

1 Answer

2000 chevy venture

The van surge when it get hot. the code i get from the scan tool is fuel pump relay low voltage and it rattles when it start to surge. i changed the relay but still doing the same thing.changed the computer, fuel pump, tried an air flow sensor nothing any idea what this problem could be?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 203 Answers

Check your ground for the fuel pump relay 1st-next see what the voltage is supposed to be and what you are actually dealing. I doubt the computer sends voltage to the relay if it is even controlled by the computer it is going to be controlled by ground. Most likley the supply voltage comes from the ignition switch or a power relay. Need to test the basics before putting too many parts in it.

Posted on May 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 Chevy Venture van I ran out of gas and now it won't start I don't hear the fuel pump running so I was wondering is there a emergency shutoff switch to the pump


There is no shut-off switch. Check the fuel pump fuse in the under hood fuse block. Also check for voltage on the fuse circuit, hot all the time. At the fuel pump connector, gray wire is voltage, solid black wire is ground. Have a helper crank it while you check for good voltage and ground at the connector.

Aug 09, 2015 | Cars & Trucks

1 Answer

My 2002 chevy venture won't start and I can't hear the fuel pump going on,after trying quite a few times an jumping my battery then the fuel pump will start working and the van will start up.After two...


Try cycling the the key a bunch of times first before you crank the engine the fuel pump could be weak or the filter getting plugged start by checking fuel pressure first also using a scan tool and checking for codes you can use the scan tool for check your crank signal

Feb 13, 2015 | Cars & Trucks

1 Answer

2000 chevy venture. wont start. change fuel pump runs perfectly for one day. next day the van start and drives out of driveway sputters and dies. starts and sputters back home. change the fuel censor. ...


Testing is the way to a fix . Fuel pump pressure testing , electrical testing . Viewing engine sensor data on a scan tool . Instead of guessing as to the problem learn to test or take it to a qualified repair shop . Changing ECU without doing it correctly can cause problems that were not there before . PCM - engine computers need to be programmed , dealer only.
GM Fuel Pump Relay Testing
Testing Electric Fuel Pump Problems with Voltage Drop Test
048 Engine Hard to Start or No Start Scan Data for Starting Problems


Jul 07, 2017 | 2000 Chevrolet Venture

1 Answer

How do you replace an ignition switch on a 2002 chevy venture van? I have a 2002 chevy venture van and have had a problem with the starter staying engaged. I replaced the started and it fixed it...


So what it only does it in park or neutral ! The vehicle starting circuit is only suppose to let it start in park or neutal . Park neutral safety switch won't allow B+ voltage to S terminal on the starter solenoid unless the vehicle is in park or neutral . It's probably the starter relay contacts stuck closed . You really should learn how it works before guessing as to the problem . Plus learn automotive electrical testing ! The ignition switch when turned to the start position send's a voltage signal to the PCM - engine computer .The PCM will energize the starter relay to crank the engine . PCM / ABS 10amp fuse in the I/P fuse box supply's B+ voltage to the park / neutral safety switch . When in park or neutral the B+ voltage goes through the control side of the relay to the PCM which will supply a ground to energize the starter relay .

Jun 17, 2017 | 2002 Chevrolet Venture Passanger

3 Answers

2000 chevy venture doesnt start


check to make sure the security light is not on if it is the van will have spark but no injecter pulse the best way to solve this issue is to have the original igniton key and put it in the igniton in the run position and leave it on for 10 minutes then the light will flash then try to start the van

Jul 15, 2009 | 2001 Chevrolet Venture

1 Answer

2000 CHEV VENTURE ,FUEL PUMP WILL NOT CUT IN ....


unplug fuel pump harness at pump and use a test light and see if turns on when someone starting van. If it does then plug it back in. and try hitting the tank where the pump is while someone is starting it. If it starts replace the pump. If no light comes on then test the fuel pump relay.

Apr 12, 2009 | 2000 Chevrolet Venture

3 Answers

2000 Chevy Venture Fuel Pressure Regulator


use the pressure test port on the top of the engine, it is on the fuel rail that supplies fuel to the injectors, looks like a tire valve, will have a plastic cap on it.

Mar 22, 2009 | 2000 Chevrolet Venture

2 Answers

Overheating


hello, have you ran a scan tool on it yet to see if its not your coolant temp sensor or other temp sensor if you don't own one you can have any place like auto zone run one for you for free you'll have more of a idea of whats wrong even if your cooling fan is at fault it'll let you know. when your chevy is at idol if the cooling fan is'nt kicking on then that's a good starting point,also check to make sure your anti freeze is'nt low and easy but over looked problem and your anti freeze cap could be bad and wont force the right amount to pressure through the cooling system also make sure you dont have air in your system when you changed the thermostat did you bleed the system through the bleeder valve mounted on the coolint system.and make sure your drive belt has proper tension even though you replaced the pump the drive belt has to be in good condition it drives the pump.also check your cooling fan fuse and the relay for it.

Mar 21, 2009 | 2000 Chevrolet Venture

2 Answers

Lights dimming and brightening on 2000 Chevy Venture


2000 chevy venture run good but my lights flickers and have to jump. After I jump the van and put my meeter on the battery its reading 14.volts at idle. I can drive around to store cut the van off come out it starts fine leave it overnite and it don't started.

Nov 21, 2008 | 1999 Chevrolet Venture

Not finding what you are looking for?
Cars & Trucks Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...