Question about 1993 Ford Tempo

1 Answer

Window want go up

How to change motor so window will go up

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 532 Answers

First pull off the door panel,there may be a few screws around the parimeter,then the clear plastic,then when you can see the window motor try hitting it lightly with a hammer,the brushes in the motor may be worn out,if the window is in the way then bang on the door where it is solid away from the glass.if it works a little then replace the motor,which you will have to drill out the 4 or 5 aluminum rivets to pull out the window regulator,then when you re-assemble it use 1/4 bolts by 3/4 of an inch long with lock nuts and washers to bolt it back on or you can re-rivet it---its your choice.

Posted on May 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I can not open driver door window and i check all fuses, winder and wires. then i change the main windows control switch with a used one but no thing change. when i change it with a new one all windows...


Firstly, you probably bought the wrong new switch. As for the window not working, the window regulator has been known to be a problem. If it was that, you would hear the motor running or trying to run. I would say that since the driver window is the one most used and if you do not hear the motor running, it is probably the lift motor. You still would have to check it because there are other components involved. No matter what, you are going to have to remove the door panel.

Good luck,
Vinnie

Apr 16, 2015 | 2007 Chevrolet Tahoe

1 Answer

A wiring diagram 190E mercedes 1986 right front door window?


Coming off the switch are a green and yellow wire and a black and white wire they run to the door connector then change to solid green and solid black. The window switch changes the current flow to go up or down. To test window motor remove inter door panel, remove moisture cover find motor plug and unhook use jumper wires to test change from pos. to neg. on both wires to check for proper motor function. if motor works both ways replace right side window switch.

Jan 04, 2015 | Cars & Trucks

1 Answer

Uplander problems


there should be a elec window control unis some where try changing that over

Dec 30, 2013 | Cars & Trucks

1 Answer

2003 chevy impala driver side window is stuck down


the window motor is inside the door behind the door panel...it can be tricky changing it out so id recommend, after getting the replacement motor, taking it to a mechanic to change it out

May 14, 2013 | Cars & Trucks

1 Answer

Driver window won't work


first thing first check ur fuse for the power window. look at ur car manual to locate the switch box. if the fuse is good check the window motor by removing the door panal then locating it inside the door. use a power tester to see if power is getting to the motor by connecting it to the positive (red) wire connected to the window motor. if its not getting power the change the motor. if it is then you may have a window switch problem. if you have change the motor, switch, and fuse the you make have a wire shortage proble so take it to a payed professional for further advice or service. good luck

Jan 18, 2013 | 2005 Honda Pilot

1 Answer

Can i change window motors a back motor for a front window motor.


usually the motors are the same but the regulators change,,

Jul 18, 2011 | 1998 Mercury Sable

1 Answer

Drivers electric window stuck in down position


actually you have thought of all but the prob. The track has jumped, making the motor not move the window. Sometimes you can gently slide the window up by hand and then the motor will catch the track and finish rolling the window up

Jul 04, 2009 | 1998 Ford Taurus

1 Answer

1992 f150 power window


If the window motor runs then perhaps the window channels need lube, get a can of silicone spray lube and apply to both window channels until it drips out the door bottom and then retry, if no change replace the regulator.

Jul 25, 2008 | 1992 Ford F150 SuperCab

Not finding what you are looking for?
1993 Ford Tempo Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...