Question about 2002 Toyota RAV4

1 Answer

How to change the side marker light in the main light assembly

The side marker light is in the driver's main light assembly. The car is a Toyota Rav 4 2002. I can reach the light housing but can not take the light bulb out. I can remove the wires to attach the lights no problem. Just can't get the light out. I would hate to have to remove it from the bottom if possible. Because then I would have to remove the wheel and the inner wheel cover to get at the stupid light. Any help would be greatly appreciated.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Try unbolting the light housing end removing it as a whole you will be able to get at it alot easier and you can take it up through the top

Posted on May 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why would only one out of 4 marker lights work?


you are right all marker lights come off of one fuse, inside instrument panel, number 29, a 10 amp fuse my manual does not give a lamp number, it has a chart, head lamps (high) lamp 9005 60 w type a, headlamp (low) 9006 51 w type b, front marker lamps 5w type d, for the rear it says to use a lamp 7443 21.5 w type d, I do not use these, I have special lights on mine, hope that it helps

Mar 28, 2015 | 2007 Scion tC

1 Answer

Toyota highlander rear side marker bulb replacement


In the rear compartment, there are little access doors that enable you to the four main bulbs for your tail light assembly. The small marker bulb is not among them, you have to remove the entire housing assembly from the car to gain access to the marker bulb. You should see two bolts that are gold in color, remove the nuts from there being careful not to drop them. Once they are removed you need to pull the tail light off the car. Now be warned, if you have an older highlander chances are that rubber gasket seal that keeps water away from the bulbs will be stuck to the car frame. You are going to need to some what forcibly play with assembly to get it off. What I did was tap the gold bolts with a socket screw driver and rubber mallet. Beyond that I just pushed and pulled till I pried it loose. Once free, remove the light that has the cable running out the back, look for the small light socket on the lower side, turn counter clockwise and replace the bulb. Never touch the new bulb with your bare hand, always hold it with a clean towel. Again, just don't be discouraged if the housing assembly doesn't pop off the first try. And ignore anyone that tells you that the bumper needs to come off or the interior needs to be peeled back; they are misinformed, this will work on the 2001-2007 highlander.

Jan 06, 2013 | Cars & Trucks

1 Answer

I have condensation in driver side fog light on rav 4 2005


Fixing the condensation requires the removal of the fog light assembly from car. Once you remove the assembly use a hair dryer to dry the insides of the unit then look for any crack on the lens or casing if there are none put a silicone in between the lens cover and the casing that should fix your condesation problem.

Nov 04, 2012 | Toyota RAV4 Cars & Trucks

1 Answer

How to replace passenger taillight assembly on 2007 RAV 4 will I need to remove inner body panels, and if so do I need special tools?


remove your tail light lens assembly using a screw driver slide the lens and lift it off then push and slightly turn the busted bulb to remove.

Apr 07, 2010 | 2007 Toyota RAV4

1 Answer

1998 toyota rav 4. Right side low beam headlight doesn't work. Hi beam on that side does. Checked fuses, they appear OK, and tried 2 other headlights. Left side hi and low working fine.


sounds like there is a broken wire. the only advise i can give you is to follow the hot wire for that light untill you find the break in the wire.

Dec 25, 2009 | 1998 Toyota RAV4

1 Answer

Driver side dome light fixture popped free into


Did you ever find out how to remove the dome light counsel, I have the same problem.

Nov 18, 2009 | 2008 Toyota RAV4

2 Answers

How to change the little front lights beside the main front light


Side Marker Lights
  1. If visible, remove the attaching screws and partially remove the front side marker light lens.
Fig. 7: To change a side marker bulb with no attaching screw, protect the body with a rag and gently pry the lens assembly outward . . .





Fig. 8: . . . until the entire assembly is free of the body and access to the bulb socket is achieved


2d8805f.jpgde76af4.jpg

Aug 30, 2009 | 1994 Mazda 323

1 Answer

Not getting fuel to my rav 4 1996.where is fuel filter located on rav 4 1996.how do I change it,assuming that is the problem in view of the fact I have a spark?cheers, Ray


Filter should be on drivers side of passenger side of car directly between the doors. To change shut off fuel pump relay switch in trunk, remove the clips and change the filter.

Jun 29, 2009 | 1996 Toyota RAV4

1 Answer

Rav 4 headlight wont work


Headlamp doors are vacuum operated. Chk for a vacuum leak.

Jun 23, 2009 | 1997 Toyota RAV4

1 Answer

1996 toyota corolla side marker light removal to install new one


Open the hood. Observe the "tab" on the driver side inner fender, above the corner of the headlamp, outer edge. Remove the screw. Pull the lamp assembly straight forward, towards you. If it has never been out, the lamp will be tight. There are 2 locking pins inside the fender that need to be defeated, you just have to grasp the back side of the lamp (closest to the driver door) and pull it straight towards the front of the car, NOT sideways.

Dec 23, 2008 | 1996 Toyota Corolla

Not finding what you are looking for?
2002 Toyota RAV4 Logo

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...