Question about 1994 Toyota Corolla

2 Answers

How to change it myself

Door handle broke inside and out on driver side

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 288 Answers

Very easy to do.

Remove door panel. Two screws in armrest, one screw in inside door handle, and pop tabs around the door. Carefullly peel back vapor barrier.

Inside handle pops out from door opener wire.

Outside handle held by two 10mm bolts. Need socket drive with extension. Lock cylinder twists out of handle.

Frank
Frank's Friendly Cars Maui Car Rental
www.MauiCarRental.biz

Posted on Aug 30, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Get a manual from the library or parts store; usually a couple of nuts on the inside of the handle. Doable but frustrating.

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why will driver doorl only open from inside the car?


The outside door handle broke ! you can only see what broke by taking the door panel off . It's plastic an they break ! $47.95 new 1Aauto . This video is just to show you what has to be done to get to it ! 2006 2011 Cadillac DTS Paint to Match Outside Door Handle Rear Driver Side How To Install Replace Outside Front Door Handle Cadillac DeVille 94 99...

Aug 23, 2014 | 2007 Cadillac DTS Sedan

1 Answer

I need written instructions on how to replace a outside driver side door handle for an 06 ford focus


Close/wind up the window. Remove the inside door panel. Be careful with power window switch and door speaker wiring connectors. Disconnect them before pulling the door panel away. Remove any plastic covers that may be glued to the door. Have a look at the door handle from inside the door. You will have some idea as to how to remove it. Usually door handles are secured by screws from the inside. Locate and remove them. Remove linkages to the door handle then pull handle form outside.

Jul 20, 2014 | 2006 Ford Focus

1 Answer

Back door won,t open on my 02 avalanche


door handle broke depends on what door handle it is.if door cant be open on out side out side door handle broke.if cant open door on inside inside door handle broke.door handle clip that connects to latch rod broken.when you try open door handle not engage to latch rod.door not going open.have to replace door handle with new clip holds latch rod in place.

Jan 09, 2013 | 2002 Chevrolet Avalanche

1 Answer

Driver side door is jamed shut. ouside door handle and inside door handle broke. can't open door. how do i get the door open or can you take inside driver side door panel off with door closed?


i don't know about taking the panel off with the door closed, but you should be able to remove the inside handle. there should be just one screw holding it in it should be right in the middle usually it is covered with a plastic cap. once you get the handle off manually pull the mechanism and open the door.

Apr 18, 2011 | 1999 GMC Suburban

1 Answer

Driver side exterior door handle broke. just one arm broke off the handle, so its still half on but i can't open my door from the out side. can i use the back door handle to replace the front one? also...


This iis very coomon, the part of the handle that broke is the part that releases the latch, you will need to replace the handle, the inside door panel needs to be removed to replace the handle, some of these are revited on and you will need to drill out revits from the outside and disconnect the linkage from the inside, hope this is helpful.

Dec 25, 2010 | 1996 Pontiac Bonneville SE CA Value

1 Answer

2007 chevy tahoe driver side door handle will not open door


the linkage behind the handle either the retaining clip broke or popped off need to remove the door panel to check and fix

Mar 13, 2010 | Chevrolet Tahoe Cars & Trucks

1 Answer

Drivers door window motor and track broke how to do it your self 97 ford thunder bird electric windows 6 cylinder show me how to fix it myself please thank you


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics

Sep 24, 2009 | 1997 Ford Thunderbird LX

1 Answer

Need help on how to change it


not hard, you just have to remove the inside door panel first. its held by plastic clips and some screws

May 30, 2009 | 1994 Toyota Corolla

1 Answer

Driver door handle will not open door 1993 Honda Civic


there is a pin in the door handle might have broke off there are two 10 mm nuts that will release the handle but you have to take the door panels off and remove it any local junk yard should have it or can order it for you

Mar 18, 2009 | 1993 Honda Civic 4 Door

1 Answer

Door handle


the inside handle and otside both work the release seperate.
what you need to do is take the door panel off the inside by a couple screws (usually in the arm rest) and several plastic clips
around the perimiter which will pull out when you pry out on the panel. You can do this carefully with a screw driver but the proper
fork tool from parts store will be easier. look inside door at latch
and see if your piece is broke or possibly the rod may have just come out and need to be put back in place. If your handle piece is broke it is easy to replace once your inside the door.

Sep 04, 2008 | 1991 Buick LeSabre

Not finding what you are looking for?
1994 Toyota Corolla Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...