Question about 1998 Buick Park Avenue

1 Answer

Need to remove idler pulley in order to replace water pump

How to remove the idler pulley from 1998 Buick Park Avenue

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

Pretty simple really take the belt off and the pulley is held on with a 12mm or 14mm bolt and then put it all back together the way it came apart. hope this has helped you and good luck with you project !

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My '99 Buick park avenue Have a squeaky And grinding sound With Smoke And burning smell On The front passenger side What does That Mean??


check serpentine belt and pulleys.. chances are one of the accessories /alternator, water pump, a/c ,or an idler or belt tensioner pulley may have seized up

Apr 19, 2014 | Cars & Trucks

1 Answer

How do you tighten waterpump pulley on 94' buick


How to Change a Water Pump on a 1994 Buick Park Avenue. ... Thread all the bolts onto the pump finger tight, then tighten the short bolts with your wrench in ... www.ehow.com/how_7471017_change-1994-buick-park-avenue.html
hope this will help

Jan 26, 2012 | 1994 Buick Century

2 Answers

How do you know which pulleys are which?


Hello. Trace the pulleys to the components they turn. That's it. Joe

Apr 30, 2010 | 1995 Buick Park Avenue

2 Answers

1998 Buick Park Avenue, replaced serp belt, but now no tension.


Hello. The tension can be adjusted. Just loosen the tensioning pulley, use a crow bar to put tension on the serpentine belt and tighten that tensioning pulley back down. Joe

Apr 15, 2010 | 1998 Buick Park Avenue

1 Answer

How do i pull the power steering flywheel to get at the rear motor mount bolt to replace the smooth super charger idler?


The power steering pump bolts are accessed through the holes in the pump pulley itself. There are usually three on the front and one on the back.

Jul 08, 2009 | 1998 Buick Park Avenue

1 Answer

1999 Buick Park Avenue Water Pump Removal


Hi once you have all the bolts off for the mount raise the front of the motor up till you can remove the center part of the mount
I use a floor jack and a 2x4 across the oil pan then remove the studs for the motor mount bracket now remove the bracket and now you can get the water pump out
hope this helps

May 10, 2009 | 1999 Buick Park Avenue

2 Answers

1999 Buick Park Avenue water pump removal


that is not an idler pully that is the power steering pully if you feel through the holes in the pully you will feel the 13 mm head bolts that hold the pump to the block remove those bolts the pump will drop down and you can then remove the water pump also you have to remove the studs using the inverted torx end on the stud to unscrew it then the mount will come out

May 10, 2009 | 1991 Buick Park Avenue

1 Answer

1999 Park Avenue water pump removal


if thats got the 3800 or 3100 in it your taking out the wrong bolts!!!!!!!
your trying too remove the whole housing
you dont need too do that !!!
take off the 4- 10 mm bolts on the waterpump pully,then remove the bolts behind it i belive that there are 8 of them that takes the pump from the housing!!

May 10, 2009 | 1991 Buick Park Avenue

1 Answer

Removing water pump 98 buick park avenue


You need to poke a small extension with a 13mm socket through the holes in the power steering pulley, undo it, and slide it back.

Mar 17, 2009 | 1998 Buick Park Avenue

Not finding what you are looking for?
1998 Buick Park Avenue Logo

553 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...