Question about 1997 Toyota Corolla

1 Answer

When dim head light is turned on, right side brake light is on with high intensity. When brake is applied, the right side brake light is still on. Meanwhile left side brake light behaves normally-dim head light on, left brake light low intense on; when brake is applied, high intense left brake light turns on.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

Sounds like you may have a bad brake light switch i think you problem will go away if you change it out. hope this has been of some help to you !

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to turn bright lights off on 2003 cts


Could be a bad dimmer switch or a stuck high beam relay or the ( DIM ) dash integrated module .
Headlamp Low or High Beams Always On

2

  1. Turn the headlamp switch to the OFF position.
  2. Verify that the transmission shift lever is in the PARK position for vehicles equipped with automatic transmissions or the parking brake is applied for vehicles with manual transmissions.
  3. Expose the sunload sensor to a bright light.
  4. Turn the windshield wipers to the OFF position.
  5. Turn ON the ignition, with the engine OFF.
Are the head lamps ON? YES or NO

3

  1. Turn OFF the ignition.
  2. Install a scan tool.
  3. Turn ON the ignition, with the engine OFF.
  4. Turn the headlamp switch to the OFF position.
  5. With a scan tool, observe the Head Lamp Switch parameter in the Dash Integration Module (DIM) Inputs data list.
Does the scan tool indicate that the Head Lamp Switch parameter is OFF?
I would think you probably don't have a GM Tech 2 factory scan tool , this is a very involved diagnostic flow chart an you can't diagnose it very easily without the factory scan tool . You could replace parts an get lucky . I would start with the high beam relay in the under hood fuse / relay center . Do you know what a relay is , not to talk down to you because I don't what you know . The relay is energized by the DIM - dash integrated module . You may want to take this to a ASE certified repair shop or the dealer !
I would



Or
wh
Which

Jul 31, 2015 | 2003 Cadillac CTS

1 Answer

I have a 1992 GMC Yukon 4x4 blazer just had it in the shop when it came out the lights are all messed up. headlights work high and low. driver side turn signal dont work , passenger side turn signal don't...


If those lights all worked properly before the shop "fixed" it, take it back to the shop and ask them to make it right. If they are reputable, they will correct the problem(s). If not, think Small Claims Court.

Oct 08, 2013 | GMC Cars & Trucks

1 Answer

Brake lights work but are very dim


It can be loose wiring or issue with bulb or the battery is weak or brake light socket getting short somewhere.Car lights getting dim,there are many such common issues noticed.I will share some familiar help links,related to your problem.
Click the link below:---2004 Dodge Ram: High Beam Light is DIM? http://technoanswers.blogspot.in/2012/04/2004-dodge-ram-high-beam-light-is-dim.html
----------Ford Odometer Dims intermittently http://schematicsdiagram.blogspot.in/2012/07/ford-odometer-dims-intermittently.html
---------Turn Signals Don't Work When Brakes Are Applied? http://schematicsdiagram.blogspot.in/2012/04/2005-gmc-envoy-turn-signals-dont-work.html
--------
Brake light Switch Location? http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html
----------- No brake lights on Buick? http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html
----------- Brake lights not working on 1989 BUICK REGAL? http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-----------
These will help.
Thanks.

Nov 06, 2012 | 1999 Ford Contour

1 Answer

I HAVE A 2005 SILVERADO AND WHEN I PUT ON MY SIGNAL LIGHTS RIGHT OR LEFT SIDE BOTH SIDES FLASH VERY DIM AT THE SAME TIME. IF I APPLY THE BRAKE WHILE THE SIGNAL LIGHTS ARE ON THE LIGHTS ALL GO OUT AND STOP...


More than likely a bad ground in the wiring harness's. Have you changed your transmission, Alternator, or starter? Or added a trailer plug on the bumper?

Jun 20, 2011 | 2005 Chevrolet Silverado

1 Answer

Signals and brake lights dim when brakes applied


it could be a bad connection in the stoplight wiring most likely the earth wire check all the wiring connectors to make sure they are plugged in properly.....hope this helps.....cheers

Jul 09, 2010 | 2004 Chevrolet Silverado

1 Answer

Brake light problem Corolla 97


the tail light and brake lights are working from double contact bulbs. check the grounding, you dont have enough ground from one of the bulbs

May 30, 2009 | 1997 Toyota Corolla

2 Answers

Head lights not coming on. Only day time running lights on. this car has two sets of head lights. I see other jaguar drive by with the out side head lights on but my only lights that come on are very dim...


The daytime running lights are usually the high beams, running at about 80% intensity. Your outer lights are the low beams. Check your fuse box and make sure you don't have blown fuses for the low beams. If the fuses are OK, check to be sure the bulbs are OK. If they are, I'd suspect either a dead or stuck headlight relay, or a bad lightswitch. Check the fuses and bulbs and post your results, and we can take it from there.

Jul 21, 2008 | 2002 Jaguar X-Type

Not finding what you are looking for?
1997 Toyota Corolla Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...