Question about Hyundai Motor 1992 Scoupe

Open Question

Hyundai scoupe 93 model, no spark?

I just rebuilt my daughters 93 Hyundai scoupe, i did nothing to the electrics except unplugged them an back in again. I checked the coil an 12v was present but when cranking over it went backwards in voltage to 9v. I wasn't sure about this so i grabbed another coil and it did the same thing. Is this normal? if it is i'm not getting a spark as i pulled a plug out and put near motor and got absolutley nothing. I have triple checked all electrical connections and im getting very frustrated. Is it a sensor? Is it a computer problem? Please please someone help

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: 1994 Hyundai Scoupe Ls

check the timing maybe your timing is off or check all the plugs on the motor.


hope this helps good luck !!

Posted on Nov 02, 2008

Ad
  • 54 Answers

SOURCE: No Spark

Sorry to tell you this if you dont already know its the ecu, take it out take off the cover and youll see the main capacitor in the center (its a black capacitor with grey markings, there are a couple of others similar located around the board but this one pretty much in the center) of the board has black suit around it and on the board, if your carefull a $3 capacitor (your local **** smith electronics will have one) and solder it in making sure you get the polarities right. unfortunately with these model cars it is a major problem, but if you are not confident with the work email me at matmenzies.adam.com.au and i can referr you to an ecu recon joint for around 85 they will fix your ecu, NOW the problem, there will be a reason why the ecu blew, it will be simple like cracked lead or wire earthing somewhere on chasis, you see the smallest earth spike, even from say turning the car over too much will blow that capacitor. sorry for the bad news and i hope i have been of some assistance.

Posted on Jan 28, 2009

SOURCE: 1995 Hyundai Scoupe Spare Ignition Key

Any locksmith should have this blank and be able to cut it, the blank you are looking for is an Ilco X196

Posted on Apr 02, 2009

  • 30 Answers

SOURCE: Hi got problem w my

There won't be any spark for the plugs with this problem. The camshaft position sensor is what tells the PCM to send spark. There is a circuit malfunction with this sensor. As the name implies, it will be near the camshaft on bank 1. Mounted to the head. This has 3 wires and is held in place by two bolts. You will probably need to pull some things out of the way, air snorkel, engine cover (if you have one).

Posted on Jan 08, 2011

01fordeb
  • 1033 Answers

SOURCE: 2001 Hyundai Accent1.5L It

I would check the CPS too, if the the sensor is bad, it has no idea where or what position the crank is in so it's not going to start.

Posted on Mar 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ECU of my Hyundai Scoupe 1994 2 doors cannot trigger the sequence of the fuel injectors to supply gas or petrol into the combustion chambers but spark is available to the spark plugs! can you help me solve...


The ECU requires timing pulses from the crankshaft and camshaft sensors in order to generate the injector pulses. All other sensors just modify the pulse width of the injectors to adjust for power and economy. If the ignition is entirely controlled from a distributor, the two above sensors would not affect the spark. Hope this helps!

Jan 17, 2010 | Hyundai Motor 1994 Scoupe

1 Answer

1995 Hyundai Scoupe Spare Ignition Key


Any locksmith should have this blank and be able to cut it, the blank you are looking for is an Ilco X196

Apr 02, 2009 | 1995 Hyundai Scoupe

1 Answer

Oil for Hyundai Scoupe 95


I would say it would be 5w30 but the oil cap would say

Mar 23, 2009 | 1995 Hyundai Scoupe

1 Answer

Car wont start


yes, replacing this fusible link will correct this issue. it seems to have a short of some sort.

Mar 09, 2009 | 1995 Hyundai Scoupe

1 Answer

1994 Hyundai Scoupe Ls


check the timing maybe your timing is off or check all the plugs on the motor.


hope this helps good luck !!

Nov 02, 2008 | Hyundai Motor 1992 Scoupe

1 Answer

Any ideas


HI
did your car is Hyundai scoupe 1992 ?????
if that...... check the CKP sensor in the distributer ....
or there is a flute in the ECU (engine control unit ) inside the car..
tell me more to .....to help you

with my best wishes

Aug 23, 2008 | Hyundai Motor 1992 Scoupe

2 Answers

1995 hyundai scoupe ls mvi


Hi paul this starter will be able to be used. same part number same starter. hope i helped thanks.

Jul 03, 2008 | 1995 Hyundai Scoupe

Not finding what you are looking for?
Hyundai Motor 1992 Scoupe Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...