Question about 1994 Mercedes-Benz C-Class

1 Answer

Cruise control how to test

I have C220 1994 i tried the cruise control but did not work i'm not sure if i did it right i don't understand german signs on it. can u help understand how it should work to diagnose problem or am i not using it the right way. Thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 408 Answers

Hello,good day,any speed approx. 40 km/h can be stored.accelerate the car with accelerator or the switch to the desired speed and briefly press switch in position 1 or 2,,once the speed is stored,release the accelerator pedal,,,to increase or decrease speed in step of 1 km/h,briefly press switch in position 1 or 2,,stored speed can resumed from approx. 40 km/h,briefly press switch in position 4,(page 80),,ty

Posted on May 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My cruise control stoped working, my speedometer still works


cruise control have there own fuse check that ,make sure it is still hooked up to throttle ,check vacuum lines and power plugs , your speedo has nothing to do with cruise,also check that it is activated,test horn ,YES horn and cruise use same relay ,make sure your brake pedal is retracted ,and that brake lights work as well, good luck with it if I can be of further help get back to me ,hope I helped you.
Woody

Aug 27, 2014 | Cars & Trucks

1 Answer

Cruise control don't work


To troubleshoot your problem,there are few help links,provided below.Click the link directly and follow the procedure to confirm the fault.So as per that you can continue further in repairing this issue of cruise control not working.
The direct help links are as follows :-----cruise control not working?


http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html
-----------Horn and Cruise control quit working?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html

--------------
Horn and cruise control not working on car?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html

------------
Horn and Cruise control quit working suddenly?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html

----------

Cruise control stop working ? http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html

---------

ford ranger cruise control not working? http://technoanswers.blogspot.in/2012/02/2005-ford-ranger-cruise-control-not.html

-------------

My Cruise control not working? http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html

----------

This troubleshooting help links will help you to confirm the problem.

Thanks.

Feb 13, 2012 | Chevrolet 3500 Cars & Trucks

1 Answer

Cruise control does not work, and message "check


cruise control connect with accelerator and engine throttle valve . try to make sure all button +/- is not press continuously press many time make sure not stuck . then off and On.

Jun 20, 2011 | 2005 Lexus Ls 430

1 Answer

My cruise control doesn't work??...any


jnjkingbird, It sounds like this problem is the clock spring as I don't believe that the horn and the cruise control would share a fuse. However, they do share a circuit in the clock-spring. You can check for power at each unit (horn and the cruise control) which would confirm this. Check each fuse as well. Good luck with this.

May 29, 2011 | 2002 Lincoln LS

1 Answer

Cruise control will not come on im not sure if


There is a fuse layout in the owner's manual... and on the fuse box lid.

Are you certain it is #20 - and not a 20A fuse?

It is either 15A (blue) or 20A (yellow)

Without a diagram - you can verify all of them quite easily with a simple $4 test lamp from the parts store.

With the key in the ON position test for voltage at both sides of each fuse.
Whichever fuse does not light on both tabs is a bad fuse.
You could have them all tested in 2 minutes.

Thanks!!

Jul 28, 2010 | 1996 Jeep Grand Cherokee

1 Answer

My 1996 Buick Century has a cruise control issue


There are many components in the cruise system. That system does not work with vacuum. The first thing I would check is the multi-function switch (the turn signal, wiper, cruise switch arm). On the back side of the turn signal arm is a plug that plugs into the steering column. Make sure that it is seated, or plugged in firmly. If you have had any work done recently on the steering column like turn signal switch replacement. That plug my have been disconnected and not reconnected completely. These multi-function switches do go bad. They are easy to replace though but a new one will cost over $100. Also the wire harness in the steering column do sometimes break off. The next thing I would check is the control unit. The cruise control unit is on the drivers side of the engine compartment right by the strut tower and the brake master cylinder. It has a cable attached to it going to the throttle body. Find the wire-harness plug on the back side of it and make sure that it is seated firmly in place. Considering the age of the vehicle My first guess is the multi-function switch. I have had to replace mine twice in my '96 cutlass, but I have also had to replace the wire harness in the steering column as well. It could be the switch on the brake pedal, or the vehicle speed sensor. I hope this gets you started in the right direction.

Sep 04, 2009 | 1996 Buick Century

1 Answer

I have 1994 chevy silverado. Cruise control


first check the fuse for the cruise control

Jun 09, 2009 | 1994 Chevrolet K1500

1 Answer

Cruise control does not function properly


could be a main relay acting up or your cruise control module is in need of replacing also check vaccum lines for signs of deteriation or cracking

Mar 16, 2009 | 2006 Infiniti QX56

2 Answers

Cruse controll


Pull up on the brake pedal. If that does not work check your brake light bulbs (LED brake lights will also keep your cruise control form working). Finally check all of the fuses. This system needs at least 3 different fuses to work properly.

Aug 05, 2008 | 1998 Honda Accord

Not finding what you are looking for?
1994 Mercedes-Benz C-Class Logo

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...