Question about 2006 Chrysler SRT

1 Answer

Alarm problems i can not disable alarm with key fob on a 06 300c

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 233 Answers

You probably need to replace the battery in the key fob. Even if the fob has a little red light that comes on, the battery could be low enough to not disarm your alarm. That little red light only needs a minimal amount of battery power to light up. Try a Radio Shack store and they will most likely hand you a screwdriver to pry off the back or remove the screw. Once it is open they should have the battery you need. Should be about 6 bucks +/- depending on your location.

Posted on May 30, 2009

  • frank_crab May 30, 2009

    You probably need to replace the battery in the key fob. Even if the fob has a little red light that comes on, the battery could be low enough to not disarm your alarm. That little red light only needs a minimal amount of battery power to light up. Try a Radio Shack store and they will most likely hand you a screwdriver to pry off the back or remove the screw. Once it is open they should have the battery you need. Should be about 6 bucks +/- depending on your location.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NISSAN PATHFINDER 1999 4X4 DISABLE EOM ALARM


You can't disable or bypass it. You'll have to go to a dealer and get a new key cut and new FOB.

Sep 05, 2015 | 1999 Nissan Pathfinder

1 Answer

How do I get my alarm system to chirp instead of beep when it goes off or when I lock my doors with the remote entry key fob?


Check to see if your vehicle honks when you press the "lock" button on your key fob. Press the "lock" button multiple times in a row. Many devices won't beep unless you double-tap the button after locking. If the horn doesn't honk, but the lights flash, your chirp feature is probably disabled.

Use your keyless fob and ignition key to enable the audible chirp. The process varies considerably on different makes and models. You must usually consult your owner's manual, a dealership or the alarm manufacturer for the correct process.

Jan 29, 2015 | 2006 Hyundai Tiburon

2 Answers

Fob still won't work after new battery and nothing wrong with the contact inside, do not hae original code for the Kia sportage 1998 so what is the next best thing ,to do?


When replacing the key fob battery there is no reprogramming required! If the key fob was working prior to the battery replacement then it would point to the contacts not being correct! Remove key fob battery and start again!

Dec 31, 2014 | 1998 Kia Sportage

1 Answer

Car alarm goes off when unlocking door


You will needs to think of it this way. Once you set your alarm it is looking for the corresponding signal to disable itself. That comes from the fob. If you don't use the fob and just use the key, the alarm system is doing its job and alerting you since it has not received the disable command from the fob. Either lock the door with the button when you exit the car if you want to use the key or use the alarm fob. This will also happen if you use the car manufacturers fob to unlock the car if you have locked it with the alarm manufacturers fob.

Hope that helps - I have hidden all of my original car fobs to help alleviate this problem!

Dec 29, 2013 | Cars & Trucks

1 Answer

Alarm goes off on unlock


the key fob disables the alarm when you unlock it. either get a key fob or disconnect the alarm.
Launch scanner

Jul 17, 2013 | 2002 Dodge Durango

1 Answer

Lost my fob for 2005 chevy cavalier but have keys will alarm go off


most alarms will turn off when the ignition key is turned

Jan 15, 2013 | 2005 Chevrolet Cavalier

1 Answer

I lost the remote to my 1996 Toyota Camry, which disables the alarm on the car. Is there away to manually disable the alarm so I can be able to start it without the alarm going off?


When you use the key to start the car the alarm will disarm. You can now purchase replacement key fob's from Autozone. They are easy to program and cheaper than the dealer. I would recommend checking ebay as well for a replacement fob.

Jan 20, 2011 | Toyota Camry Cars & Trucks

5 Answers

How do I disable the alarm system for my 2006 Chevrolet Cobalt? Every time I unlock the doors and open them, a short honk beeps in 1 second intervals, and then after ten seconds proceeds to the full...


If you lock your doors with the remote, you have to use the remote to unlock them or it set off the alarm. I don't know why the manufacturers designed it that way(kind of stupid)but it's programmed into the on board computer. You can't disable the alarm without creating a worse problem somewhere else.

Jan 02, 2011 | 2006 Chevrolet Cobalt

1 Answer

Hit panic alarm on fob accidentally and wont turn off unless key is in ignition and turned on. as soon as key is removed from ignition panic alarm starts again. fob seems to be not working. can i manually...


reset the computer by disconecting the posative cable for 3min reconect it should cure the problem
if not have a disnostic run most auto parts will do this for free
hope this helps
Please leave feedback

Mar 21, 2010 | 2002 Saab 9-5

2 Answers

Car will not start


replace the battery in the key fob and unlock the car with that, if u last locked the car with the key fob, you armed the alarm and can only be disabled by unlocking with the key fob, the car wont start because its an anti theft feature.

Jan 16, 2009 | 2000 Hyundai Sonata

Not finding what you are looking for?
Cars & Trucks Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...