Question about 1999 Jeep Cherokee

2 Answers

Just quit ,gages wont show anything ,wont start,code 1694

I have a 1999jeep cherokee and it just quit and the gauges went and it wont start now ,what do u think the problem is blue jeep

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 58 Answers

First of all try getting a jump.
after that make sure your batter wires are conected tight.

Posted on May 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Does it crank over?

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 Jeep Cherokee I was driving it and quit running the fuel pump quit running and the gas gage stopped working


check your fuel pump relay. if not that, then it's your fuel pump. the gas gauge is in the fuel pump, so if your fuel pump stopped working, your gas gauge won't work

Mar 12, 2016 | Jeep Cars & Trucks

1 Answer

I have a 2001 jeep grand cherokee, as soon as i turn it on the check gage light comes on but none of the gages move except oil an i checked the oil the car will shake alittle and make a funny noise, also...


Is the check engine light on too ?
The check gauges light means one of the gauges is below normal. The oil pressure gauge measures oil pressure, not how much oil is in the crankcase.

Jul 12, 2013 | Cars & Trucks

1 Answer

I have a 2000 Jeep Grand Cherokee and the oil gauge is going from 0-50 psi. There is oil in the engine. Should I be looking at the gauge or the pump for the problem.


the 1st thing to do is hook up a mechanical test gage and see what the pressure really is, the one used in the truck is electronic and u could have a sending unit problem, if the mechanical test gage show the same readings u will need a new oil pump, this assumes the engine doesn't have any bearing knock type noises

Jul 13, 2010 | 2000 Jeep Grand Cherokee

1 Answer

A few weeks ago i installed a air intake and flowmaster muffler on my 99 jeep cherokee. after i took the stock muffler off i realized i needed some wire for my welder so i drove the jeep without a muffler...


My first question would be, "did you disconnect the battery before welding the exhaust?" This could fry the ECU. What codes are you retrieving now?

Mar 08, 2010 | 1999 Jeep Cherokee

1 Answer

Similar to mezouii, my jeep grand cherokee laredo runs out of gas quite often and sooner than it should. the gas gage is broken but i time the mileage after i gas up and i should be able to go twice as far...


sounds like somone has a garden hose in your tank personaly i would check the fuel tank ground
it is likely the reason your gage doesnt work
once gage works you can properly monitor fuel use

Jan 08, 2010 | 1993 Jeep Grand Cherokee

1 Answer

I have a 1996 Jeep Cherokee Classic. My Tachometer, Fuel Gage, and Speedometer quit working a few months ago. The Oil pressure,and Temperature gages work fine. All fuses are fine. I suspect a grounging...


have you tried working on one problem at a time?
have you check the body computer for any codes?
and to also verify the bus line is ok.
if you find nothing wrong with BCM or bus,
try checking the speed sensor for an output signal or if the gear is bad.

Nov 18, 2009 | 1996 Jeep Cherokee Country

4 Answers

2001 dodge durrango check gages light comes on why


When the check gages light comes on just after start up usually one or more gages have momentarily not picked up yet. Dodges are famous for this. If the light stays on for more than 10 seconds and all gages are working t could be a faulty sending unit or you may have to get the computer software reloaded at a dealer

Oct 06, 2009 | 2001 Dodge Durango

Not finding what you are looking for?
1999 Jeep Cherokee Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...