Question about 1990 Nissan Maxima

Open Question

Replacement of struts/shocks

I need to replace the Macpherson struts and the rear shocks to a 1990 Nissan Pintara 2.4 litre. Is this a particularly difficult job. Any tips on how to do it?. Any spacial tools required?.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1779 Answers

SOURCE: replacement shocks and struts

Check out autopartswarehouse they list front and rear KYB product. Not much out there, probably because of the year of the Murano, not too many people replacing shocks/struts yet, there will be much more available in a couple of years. I had to search for some time to find something.

Posted on Nov 27, 2008

Ad
  • 740 Answers

SOURCE: Front struts replacement

Jack up and secure front end of your vehicle,Take off two front wheels. Loosen to bolt on the bottom of struts (Its a bolt and nut). Remove clip that holds brake hose on to strut and remove hose. DO NOT OPEN BRAKE LINE OR DISCONNECT FROM CALIPER. Remove bolts and remove bottom of strut from knuckle/Hub assembly. Then loosen nuts on strut tower( on top of fender inside hood) (3) nuts, mark exact locations of each nut on strut mount area on upper fender weld. Make sure to hold strut on the bottom so it doesn't drop down on caliper and knuckle or on you possibly.YOU WILL NEED A SPRING COMPRESSOR to compress spring so you can take struts off. MAKE SURE THAT SPRING IN COMPRESSED/SQUEEZED WITH A STRUT COMPRESSOR. Then loose center nut on strut tower(may be covered with a circular rubber cover) If nut spin around with out getting loose use vise grips to hold strut rod ONLY TO REMOVE STRUT NOT TO INSTALL. if you use vise grips to install it will damage strut. When nut is off, remove strut and reinstall new one transfer all rubber boots and cushions from old strut. Good Luck thanks for using FIX-YA.com contact me if you need more help.

Posted on Dec 30, 2008

  • 42 Answers

SOURCE: adjust clutch

That's probably because of the fact that they didn't make enough of that model of cars that they would put it on their website. That's what I would say. Just google clutch for australian Nissan Pintara and see what happens.

Posted on Jul 10, 2009

  • 1986 Answers

SOURCE: Removal of Front Door Handle Pintara Nissan

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Posted on Sep 21, 2009

ministock48
  • 258 Answers

SOURCE: does macpherson strut rotate when the front wheels are turned?

yes just the lower control arm and lower ball joint

Posted on Oct 19, 2009

Testimonial: "ok thanks"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Suspension components for 1994 hyundai sonata


It has front and rear Macpherson struts, see picture below.
8_9_2012_7_36_19_pm.jpg

Aug 09, 2012 | 1992 Hyundai Sonata

1 Answer

Steering not responding well


Automobiles: 2006-2007 Ford Five Hundred 2WD & AWD, Montego

If the steering is getting a little hard to turn at low speeds, this would indicate a loss of Power Steering, and the steering is reverting to "Non-Power" steering, just like the days of the Ford Model T or Model A. Loss of power steering is usually caused by low level of PSF (Power Steering Fluid).
So first on my checklist would be checking the PSF level in the reservoir.
Also bleed (air) from PS (Power Steering) pump.

The Ford Five Hundred has front MacPherson struts, so check these for leakage (of the dampening fluid in the strut cylinder), or breakage of their coil springs.
These springs can actually weaken over time, but this is impossible to see - you must "feel" it by bouncing the strut up & down - preferably with your hands on the top of the strut tower in the engine compartment (rather than on the exterior finish).
If the MacPherson struts have weak/broken springs, these components are not separately serviceable, and the strut would have to be replaced as a unit (and preferably both left/right to maintain smooth/even ride).

The Five Hundred also has rear shock absorbers with springs - check for leaks/breakage/weakness here too.

Steering losing responsiveness/wander - checklist
Priority Action Part Type Cause
1 Inspect Rack & Pinion - Center Wear From Internal Fluid Leaking Around The Rack Piston.
2 Inspect Steering Stabilizer Bracket - Loose or Broken Steering Stabilizer Bracket.
3 Inspect Front Lower Control Arm - Front Lower Control Arm loose/missing bolt(s)
4 Inspect Front Lower Ball Joints - Front Lower Ball Joint(s) Worn/Loose
5 Inspect Front Upper Ball Joints -Front Upper Ball Joint(s) Worn/Loose
6 Inspect Tire Pressure - Tire Pressure should be 35 PSI for the Five Hundred and Montego's P225/55R18 OEM (Original Equipment Manufacturer) tires.

Harsh ride - checklist

1 Inspect Rear Shock/Strut - Shocks/Strut failing/leaking.
2 Inspect Front Shock/Strut - Shocks/Strut failing/leaking.
3 Inspect Coil Spring - Incorrect Coil Spring Selection or Installation.
4 Inspect Coil Spring - Coil Spring broken.

Dec 05, 2011 | 2006 Ford Five Hundred

1 Answer

Shocks


1992 Toyota Celica is not equipped with front "shocks". This vehicle is equipped with front wheel drive and independent MacPherson strut front suspension. Any repairs made to this system requires the removal of the entire strut assembly, which includes the strut, the coil spring and upper strut bearing assembly.

Replacement of any of the parts of the strut assembly requires the use of specialized equipment designed to compress and hold the coil spring to relieve the tension on the strut and upper bearing assembly.



12_4_2011_9_36_51_pm.gif
Any attempt to disassemble the strut assembly without the proper equipment for compressing and securely holding the coil spring can result in SERIOUS INJURY or DEATH.

Nov 30, 2011 | 1992 Toyota Celica

2 Answers

Are struts on the front or back of this car?


The struts model (MacPherson Strut),are both in front and back of this car.
2000 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Rear, Driver Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly. $72
2000 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Rear, Passenger Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly $68
1996 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Front, Driver Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly $67
1996 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Front, Passenger Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly $63
Of course this is only the cartridge, you have to transfer the spring, and the top mount of the existing strut. You need a pair of coil spring compressor to do the job. The basic procedure to replace a strut is:
Remove the top nuts that secure the strut assembly to the frame mount inside the engine compartment. Do not remove the center nut.
Mark the lower strut mounting location on the hub for installation reference. The alignment will be close if the new strut is installed in the same position.
Remove the bolts that hold the strut assembly to the hub.
Remove the strut assembly from the vehicle.
Mark the top mount for installation reference. Using a side mounted spring compressor, compress the spring and remove the top nut and retaining washer. Pull strut assembly out from the bottom of spring.
Slide the new strut assembly up into the spring and reposition the top mount onto the spring in the same position that it was removed. Install the retaining washer and top nut.
Tighten the top nut to the manufacturer's specifications and carefully remove the spring compressor.
Place the strut assembly back into the vehicle.

Oct 16, 2010 | 2000 Hyundai Elantra

1 Answer

I need shocks, they have never been replaced in 107K miles. Does this car have 4 shocks or 2 shocks and 2 struts


Thr front will be MacPherson struts, a shock absorber surrounded by a coil spring looking set-up.


FOR THE REAR:
If you have front wheel drive and you have Electronic Ride Control (ERC), then the rear suspension has "super lift air shocks".

If you have all wheel drive, then you have struts in the rear suspension.

Does help any?

Oct 26, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

1997 nissan pick up two wheel drive handling pourly front end seems low.


check tire pressure. if good probably need new macpherson struts(shock absorbers in coil springs). push down briskly on right & left sides of front fenders. if either, or both recover rather slowly- probably bad struts. this will affect steering response.
if you have a favorite mechanic, have them check it out! this is a job you can do yourself, but you need the proper tools to do it. so i'd have it done by a pro!
i wouldn't pay more than 180-220$ for replacement of both. have your truck lubed and axle boots checked while you're at it!
good luck!

Sep 28, 2009 | 1997 Nissan Pickup

1 Answer

Adjust clutch on nissan pintara (it dosn't give me the pintara option in the choose a category) 2 lt, 1990


That's probably because of the fact that they didn't make enough of that model of cars that they would put it on their website. That's what I would say. Just google clutch for australian Nissan Pintara and see what happens.

Jul 10, 2009 | Nissan Pulsar Cars & Trucks

2 Answers

1990 Camry -- Serviceable or non-serviceable struts ?


I use the same model of car with you. It is a non-serviceable part that you use in the replacement of your struts.

Good luck.

Rate this solution.

May 25, 2009 | 1997 Toyota Camry

Not finding what you are looking for?
1990 Nissan Maxima Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...