Question about 2000 Mercedes-Benz E-Class

1 Answer

Replace transmission control module?

How do I replace the transmission control module in a 2000 Mercedes Benz E Class

Posted by on

  • Anonymous Mar 19, 2014

    mercedes b class transmission fault code 0776

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 203 Answers

You should really have a qualified tech. replace this control unit. It is located in the foot well in passenger side. There is a false floor held in by 10mm nuts that the unit attaches to. You will more than likely need a S.D.S. machine to download the software out of the old unit and into the new unit. Next you will have to version code the new unit and set the parameters for your shift points. I have never replaced one and tried to start and drive the vehicle w/o the S.D.S.. I can't be sure it would be drivable but there is only one way to find out. Either way you will have to take to appropriate repair facility and won't have the same warranty replacing it yourself. What ever you do do not remove the electrical connector with the key on, I also hope that the vehicle was properly diagnosed. Hopefully I have been helpful. Good luck

Posted on May 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the transmission control module for a 2002 Mercedes benz c240


it is integral to the transmission , i've put a link to a video , shows the basic procedure so you will know if it's something you could do or get a mechanic
Mercedes Benz Transmission Control Module Replacement

Apr 08, 2015 | Cars & Trucks

1 Answer

I have a 2000 Mercedes SL500. Cluster is flashing 'start error' and I have a P1570 code. Engine cranks but won't start. Starter has an abbreviated spin time too


code p1570 refers to ignition switch control module/ECM-attempted theft/data bus/not compatible ===causes --wiring--connections--trouble codes stored in other system--ignition switch control module---ECM
If this is a recent problem I would suggest that the ignition switch module be checked/replaced.

Nov 03, 2014 | Mercedes-Benz Mercedes Sl 500 Class Sl500...

1 Answer

My 2000 E 430 Mercedes Benz has been stuck in park since yesterday when I spilt a soda in center console and when I stick a pen and bi pass the locking mechanism it stays in first gear and will not shift....


Oh thats bad I have seen this before the gearbox control module is located directly under were you spilt your soda there is no reset sorry you have shorted the module and will need to replace it

Apr 10, 2013 | 2000 Mercedes-Benz E-Class

1 Answer

Where do I find 2000 s430 meresede benze right door computer control module?


I am sorry but fixya has no parts locator service, so we will be unable to help with this.

Jul 12, 2012 | 2000 Mercedes-Benz S-Class

1 Answer

Hello. i have a 2000 E 270 CDI automatic transmission mercedes-benz. i want to reset the transmission and i don't know how. if u pls help me solve this. thank u


I can advice you only this can do in Mercedes dealer workshop, By Mercedes Benz diagnostic computer, you ask them you need to software update and reset your adaptation data in your transmission and engine control units, when you do the transmission you have to do the engine software update too otherwise it can make software clash between two control modules, if software version different, is this information helped you?

Oct 20, 2010 | 1999 Mercedes-Benz E-Class

1 Answer

Recieving p0700 trouble code


all this code means is that the Transmission control module [TCM] has requested the powertrain control module [PCM] to turn on the check engine light, this is done to alert you to the fact that the transmission has a fault in it;s operation, u may feel nothing, u will need to get the TCM tested for the fault code.

Jan 04, 2010 | 1997 Mercedes-Benz Mercedes Benz S Class...

2 Answers

Itermittently doesn not shift to 3rd


check fluid level!
then the transmission contol solenoid

Jul 20, 2009 | 1987 Mercedes-Benz Mercedes Benz 500 Class

1 Answer

Replacement cost estimate for C Class Transmission Control Module


At least $85 an hour....part takes about 20 minutes at the most to change....part being MB.....not sure....should not cost more $200.

Jul 04, 2009 | 2002 Mercedes-Benz C-Class

1 Answer

Gear shifting


Hello, The proper name for this A/T control module. Be careful because there are many other factors that control the transmission shifting like shift solenoid, throttle valve solenoid, trans speed sensor, trans temp switch etc. etc.
I hope this helps.
CYA, Gator241

Jan 26, 2009 | 2000 Mercedes-Benz S-Class

Not finding what you are looking for?
2000 Mercedes-Benz E-Class Logo

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...