Question about 1992 Nissan 300ZX

1 Answer

SHIFTER STICK! I HAVE A 92 300ZX, AND I WAS DRIVING THE CAR BUT SOMETHING HAPPENED WHEN I SHIFTED TO 4TH GEAR! THE SHIFTER STICK IS VERY WOBLELY AND DOESNT SHIFT TO ANY GEAR! I LOOKED AT WERE THE CONNECT AND THE 2 STICKS THAT CONNECT LOOK BROKEN! HOW DO I PUT THE SHIFTER STICK BACK TOGETHER WITH THE JOINT?? ANY IDEA ON HOW THE SHIFTER JOINTS CONNECT?? THAANK YOU..

Posted by on

  • 1 more comment 
  • NISSAN 300ZX May 30, 2009

    OK. AND HOW MUCH DO YOU THINK THIS WOULD COST IF I TAKE IT TO THE SHOP??

  • NISSAN 300ZX May 30, 2009

    YOU WOULD KNNOW HOW TO EXPLAIN TO PULL THE SHIFT RAILS OUT??

  • NISSAN 300ZX May 30, 2009

    OHH I GOT YA!! WELL THANKS FOR UR HELP!! :)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 75,807 Answers

U need to pull the shift rails out and check them for wear, chances are they are in need of replacement, if u dn't know how to do this have a trans repair shop do it.

Posted on May 30, 2009

  • yadayada
    yadayada May 30, 2009

    no way to tell this until the parts are removed and examined for wear or damage,

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What could cause my 1997 madza to jerk in 4th gear then sometimes the hold light would flash


my guess is this a automatic or a manual shifted STICK shift cars.

? the key to any help is to say what is there.

we are blind here. (mine was a stick)

Jun 14, 2014 | 1998 Mazda 323 1.3

1 Answer

Shifter wont go into 1st or 2nd


check shifter lever for adjustments

Jun 04, 2012 | Saturn SL2 Cars & Trucks

1 Answer

Stick shift


Hi:
The shift pattern is pretty much the same on all 5 speed cars. The top row is the odd numbers, 1-3-5
the bottom row is 2-4-Reverse. The center position is neutral

Here is the key: The shifter is slightly spring-loaded to the center position. If you hold in the clutch pedal and pull the shifter to neutral, and let go of it, it will automatically be lined up in the position, that if you pushed it forward , it would go to 3rd gear, and if you pulled it back, it would go into 4th gear.
This way, to start driving, you start out in neutral, grab the shifter lightly, and push it first to the left, then forward. This is first gear, where you start out. when you want to shift to second, push in the clutch, and keeping left pressure on the shifter, pull all the way back . Here is the easy part, 2nd to 3rd. When you are ready, push in the clutch, and just push the gear shift forward , till it hits neutral, and is spring loaded to the middle. Then you just push it straight forward to 3rd, then next shift, straight back to 4th.
Last gear, 5th: push forward to the neutral row, then Push to the right till it lines up ,and forward to the 5th gear. Reverse should only be shifted into from a dead stop. Find neutral, push the shifter all the way right, then pull back towards you. Hope this helps.
Practice a bunch in the driveway!

Apr 21, 2010 | 2001 Hyundai Elantra

3 Answers

My 98 cavalier manual stick shift will not go to reverse gear


sounds like the shifter linkage has worn and not working properly need to lift in air and inspect the linkage

Jul 08, 2009 | 1996 Chevrolet Cavalier

1 Answer

Won't go into gear to drive. may be transmission?


If the clutch has never been changed most likely it is that. The way you can check it is by removing the transmission and looking at the clutch disc. It could be transmission syncros but I am willing to bet you just need a new clutch.

May 24, 2009 | 2001 Kia Sportage

1 Answer

Shifter seems to have shifted


just ram the shifter in your booty,.....duh

Dec 31, 2008 | 2003 Toyota Celica

1 Answer

Tranny Lock


syncro problem
low on oil
check stick shift adjustments
shift stick bushes or a cable problem
check engine mounts
gearbox, fork or clutch worn

Mar 11, 2017 | 1987 Toyota Celica

1 Answer

'99 wrangler has trouble shifting to 2nd gear - 4th gear occasionally slips to neutral


If you can see where the shifter goes through the floorboard, make sure the shifter is not hitting the floor.
There could be interfierence under the car also.

Oct 24, 2008 | 1999 Jeep Wrangler

Not finding what you are looking for?
1992 Nissan 300ZX Logo

Related Topics:

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...