Question about Ford F-350

1 Answer

I have a 2004 ford f350 and am putting a hopkins 7 way rv connector in. my lights on the rv work, but the turn signals do not. i have the yellow to the yellow for the left and the green to the green for the right. The tailights and marker lights work. thoughts

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,869 Answers

You will need to purchase a diode divider box made for newer cars/trucks from an autoparts store

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to install a Hopkins 4-wire flat connector to my 2000 Nissan Frontier. The color code on the Nissan is different than that of the Hopkins connector. What colors do I connect?


4-Way

5-Way

6-Way

7-Way

Green

Yellow

Brown

White

Red

Blue

Purple

Right Turn & Brake

Left Turn & Brake

Tail Lights

Ground

Backup Lights

Electric Brakes

Auxiliary Power

Jun 26, 2011 | Nissan Frontier Cars & Trucks

1 Answer

I have a 96 ford explorer xlt with a hidden hitch. the 7 pin rv connector is not working. i found where the wires from vehicle connect to 7 pin connector and one wire was caroded at the crimp black wire...


Yes, you need the other wires to provide the trailer with battery voltage. If the trailer has trailer brakes, you should have an RV mechanic wire up the connector so the brakes on the trailer operate from the Ford.

Mar 11, 2011 | Ford Explorer Cars & Trucks

1 Answer

Instructions for wiring a moving trailer connector


accessconnect_logo.jpg


Trailer Wiring Diagrams 4 Way Systems

4 way flat molded connectors allow basic hookup for three lighting functions; right turn signal / stop light (green), left turn signal / stop light (yellow), taillight / license / side marker (brown) and a ground (white).

4%20way%20wiring.jpg 4way_vehicle.jpg 4 way tow vehicle side.
4way_trailer.jpg 4 way trailer side.
5 Way Systems

Same as 4 way system listed above but adds a extra blue wire for brake signal or auxiliary power. Used on pop up camper trailers or utility / boat trailers.
5way_vehicle.jpg 5 way tow vehicle side.
5way_trailer.jpg 5 way trailer side.
6 Way System, Rectangle Plug 3/4 inch by 1 inch 6 way rectangle connectors right turn signal (green), left turn signal (yellow), taillight (brown), ground (white). The red and blue wire can be used for brake control or auxiliary. Use on a small motorcycle trailer, snowmobile trailer or utility trailer. Can also be used as custom wiring on trailers with 3 light/wire systems. See "Tow Vehicle Taillight Wiring" below.
6way_rectangle_1.jpg 6 way tow vehicle side.
6way_rectangle_2.jpg 6 way trailer side.
6 Way Systems, Round Plug

Round 1 1/4" diameter metal connector allows 1 or 2 additional wiring and lighting functions such as back up lights, auxiliary 12v power or electric brakes. Note: The black (sometimes red) 12v and blue electric brakes wire may need to be reversed to suit the trailer. Check with a test light or VOM. Uses: horse trailer, travel trailers, landscaping trailer, car trailer, etc.


6way_vehicle.jpg 6 way tow vehicle side.
6way_trailer.jpg 6 way trailer side.
7 Way Systems

Round 2" diameter connector allows additional pin for auxiliary 12 volt power or backup lights. Uses: heavy duty landscaping trailer, car trailer, boat trailers, horse trailer, travel trailer, construction trailer, etc. Check with a test light or VOM.


7way_vehicle.jpg 7 way RV flat blade tow vehicle side.
7way_trailer.jpg 7 way RV flat blade trailer side.

Jan 01, 2011 | 2001 Pontiac Montana

2 Answers

Tail light wiring connectors and wiring diagram


A test light checking each connector would be faster and easier to do. Maybe somebody may have a illustration for you but by far a simple test light is all you need with a helper turning on the different lights as you check them out and writing all your findings down

Jan 22, 2010 | 1997 Ford F350 Crew Cab

1 Answer

How to wire a jeep wrangler for towing behind a motorhome using a 7 way rv connector . the jeep has three wires, brown, green and yellow. green and yellow are turn signals, I am having problems with the...


I tow my 2005 Jeep Wrangler behind my motor home. I installed a Jeep trailer towing wiring kit to the rear lights. the bought a long trailer wiring kit and ran it from the front of the Jeep to the Jeep tralier wire plug. Pluged it in and pluged the other end into the motor home trailer light recptacle. I used only four wires plus ground. There is probably a way you could tap into the wiring harnes under the hood but not having a wiring diagram this is the best I could come up with and all lights do work. You can buy a test plug with led lights that plugs in both male and female, real handy for checking connections.

Jan 09, 2010 | 2004 Jeep Wrangler

1 Answer

Air bag light is and flashing code 27


This is a common fault on FORD
 
Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.
 
 
Just push it together properly and it should clear the AirBag fault light 
 


Jan 05, 2010 | 2004 Ford F350

2 Answers

Trailer wiring


you have to purchase a converter box with 5 wires, red, yellow, green and brown. this is because your turn signal is seperate from you parking and brake light bulb. you have to wire it straight in behind the connector.your basically converting two wires ( brakes and parking) to one wire (tailights) 5 wire to 4 wire.

Jul 12, 2008 | 2004 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...