Question about 2000 Chrysler Concorde

1 Answer

I have a 2000 chrysler concorde that the engine light just popped on - the error codes are po302, po420, po340

I have a 2000 chrysler concorde that the engine light just popped on - the error codes are po302, po420, po340

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

P0302-cylinder #2 misfire detected
P0420- catalyst efficiency below threshold bank 1
P0340-No cam signal at PCM.
The Cam sensor most likely needs to be replaced first. Clear the codes after that and drive and see what comes back on.

Posted on May 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Chrysler Concorde, The battery caused a fire, fixed that problem, but now check engine light comes on, and sputters a bit. Any suggestions?


The easiest way to figure this out is to read the touble code that triggered the check engine light.You will probably want to clear the code after making the correction,otherwise,it colud take a lot of ignition cycles to go out on its own.A basic code scanner is about 50 bucks,which will pay for itself in one use! The battery fire probably melted a nearby wire,connector,or sensor.

Aug 08, 2012 | 2000 Chrysler Concorde

1 Answer

2000 concorde battery light on


Well is the battery dieing while engine is running? If you have replaced all the parts you listed and the battery dies, it is a connection problem. Check for a master buss fuse between the battery and the alternator. On some cars these may be very hidden,some not so much. If this fuse is blown then voltage can not get to the battery. Hope that helps.

Feb 23, 2012 | 2000 Chrysler Concorde

1 Answer

I have a Chrysler concorde 2000 and the transmission light is on What could it mean


it means your car has the obd2 code problem, you need a scan tool to diagnose the code, and then delete the code, i know this tool is helpful for your car. or you can take it to the chrysler dealer, they will check for you, hope help.

Jul 09, 2011 | 2000 Chrysler Concorde

1 Answer

2000 chrysler concorde check engine light came on, dash lighs flash and transmission wont shift any ideas?


It sounds like you have a problem with your security system if you mean that it won't allow you to shift out of park. BUT you should start off getting the engine error code read so you will know what the car is trying to tell you. Anytime you get a check engine light, the vehicle generates an error code.

Since you probably can't drive it, you need to rent, borrow or buy an OBDII scanner and get that code, so it gives you a clue on where to begin the troubleshooting process.

Jul 04, 2011 | 2000 Chrysler Concorde

1 Answer

I need to know: Which cylinder is the 4th cylinder on the 6 cylider Chrysler 2.7L DOHC 24 Valve engine?


Check this diagram for...
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "U"
or
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "V"
or
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "R"

zjlimited_275.gif


Good luck (remember to rate and comment this answer).

Mar 28, 2011 | Chrysler Sebring Cars & Trucks

3 Answers

Code PO340


P0340 is a Crankshaft Position Sensor error. It determines firing order and is most likely the cause of your problem. It's mounted near the oil filter on the engine block. Below is a picture of how it appears in your car. Best of luck.
Greg


23ad084.gif

Jul 13, 2009 | 2005 Chrysler PT Cruiser

Not finding what you are looking for?
2000 Chrysler Concorde Logo

1,279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...