Question about 1995 Ford Thunderbird

2 Answers

Brake/tail lights i got my entire back lights replaced bcuz i got pulled over by the police bcuz they said my back light ddnt work.i want to know do the big red part in the rear of my 1995 ford thunderbird suppose to light up bcuz i was told by a few auto techs at auto zone that they ddnt install lights in the big red part with the bird on it until 1996.please let me know if this is true or false bcuz niether side lights up,only the small red end and the white parts light up on both sides.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I own a 1992 thunderbird sc and the tail lights across the trunk do indeed light up mine has bulbs 1 on either side 1356 i believe. funny thing is mine dont work either

Posted on Apr 01, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

I have a 1993 t bird auto zone is rite

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 Chevy Malibu, and the entire right tail light assembly is out. Is this likely to be a fuse issue, or a wiring issue?


Pull the connector from the back , test signals going into the tail light assembly , if good you need a new tail light assembly . No it's not a fuse issue . The brake light's ,turn signals , park lamps all have thier own power supply - different fuse's . Do you know how to test automotive electrical circuits with a volt meter ? How to use a wiring diagram so you know what your testing ? Here is a web site for free wiring diagrams http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model an engine ! Under system click on lighting ,then under subsystem click on tail lamps . Click the search button then the blue link. Check the ground circuit (pin E ) grounds get corroded .
Electric Testing Techniques You Need to Know
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts
How to Use Multimeter Beginner Crash Course


Jun 05, 2017 | Cars & Trucks

1 Answer

How do I remove the 3rd brake light housing on a 2004 Kia Sedona? Does it just pull off or do I need to remove the entire panel to replace the bulb?


Usually you can replace light bulbs without removing anything. You just pull back a panel in the trunk and the light have a plastic socket that twists to unlock it so you pull it out and replace the bulb in the socket. Then place the socket back in the light and twist it to lock it back in to place. It really simple. Head light need replacing but not typical tail lights.

Aug 13, 2014 | Cars & Trucks

3 Answers

On the fuse chart, what is the abbreviation for the brake light fuse


Should all be the same fuze. Check the bulbs and whether the harness to the rear lights that usually runs through the trunk hasn't been pulled.

Jun 25, 2014 | 1998 Toyota Camry

2 Answers

Drivers side tail light, changed bulb, but still does not light?


buy some contact cleaner and give the light socket a good spray,also check the earth for the tail light ,if it had a fault it would be blowing fuses,was the old tail light blown ,to look like white ,if so its moisture causing the problem

Apr 09, 2012 | 2005 Volkswagen Jetta

1 Answer

How to replace brake light bulb


  1. Open the back hatch of your Honda Pilot and look for two small screws. They will be right behind the tail light. Remove the two screws, using a standard screw driver. You should now be able to pull the tail light box away from the car a few inches to allow access to the sides of the tail light box

  2. Remove the two ball sockets found on both sides of the tail light box. At this point you should be able to move the entire assembly enough to get at the tail light. Inside the tail light you will find three bulb sockets. Remove all three bulbs by turning the sockets to the left.

  3. Then replace each break light bulb by screwing them clockwise into the sockets. Then, reassemble the tail light box in reverse order.
Hope this is a help PLEASE RATE MY HELP

Nov 28, 2010 | 2009 Honda Pilot

2 Answers

Change brake light bulb on a 2000 Nissan Frontier


The entire bed line will need to be removed. The long screws that hold the metal bracet where the bed extender attaches also hold the tail light assembly in place.
I pulled the bed liner up at a 45 degree angle and layed it on top of the cab. This revealed the screws. Take both screws out and lay to the side along with the metal bracket for the bed extender.
Now firmly grab the edges of the tail light assembly and pull...there are 2 hard rubber nipples that snap in to hold the assembly. You will feel like you might break it but you won't..just pull straight back hard. The assembly will "POP" out and then you can just twist the back of each bulb there are (3) and pull out..now you will see the bulbs..just pull the bad bulb straight out and push the new one into place. Now just reassemble. Total time will be 30-45 min. for this repair.

Mar 30, 2010 | 2000 Nissan Frontier

1 Answer

Thrid bake light works, but no tail brake lights


Check for missing brake light relay in central junction box behind battery. I had same problem with my 2004. Turned out the brake light relay had been taken out when car was take out of service.

Sep 18, 2009 | 1996 Ford Crown Victoria

3 Answers

Tail lights work, but not one brake light when braking at night.


2001 jeep grand cherokee left brake does not work period. I replaced bulb to no avail. the entire tail lamp assembly looked brown as though it heated up. However, the tail light, signal light and back-up lights still work. Please help.
Mike.

Sep 03, 2009 | 2001 Jeep Grand Cherokee

3 Answers

How to access brake tail light to change


Tail light replacement is not as hard as it seems.
Tools needed:flat head screwdriver and a deep 5/32 socket(a pair of pliers will work).
Step 1: open trunk and pull back truck liner at tail light.There is a small button clip on liner.Use screwdriver to pop up the center of button clip,pull clip out of hole.
Step 2:You will see a black wire attached to the body of car with 2 white clips.Use screwdriver to pop clips off of studs.
Step 3:Remove the nuts from the studs and pull tail light assembly straight back away from car.The outer side of the light just snaps in and out of place.
Step 4:Turn light socket counter clockwise 1/3 turn and pull out.
Step 5:Pull bad bulb straight out and replace.Reverse steps to reassemble.

Oct 24, 2008 | 2007 Nissan Sentra 2.0 SL Sedan

Not finding what you are looking for?
1995 Ford Thunderbird Logo

356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...