Question about 1993 Chevrolet Astro

1 Answer

No Brake Lights 1993 Chevy Astro Van

Brake Lights wont work,have replaced both passenger and driver side Taillight/brake light Bulbs and also Brake switch Located down under dash so brake lights should come on when stepping on brake pedal. Also have checked brake lights Fuse and its good.
Tail Lights and Turn signals work Only Brake Lights That don't want to work? Help, is there some other switch that could be causing them not to work?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Check the ground wire & leads, if not try the multi-function switch in the column

Posted on May 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No brake lights and only 1 taillight works on driver side and no brake lights on passenger but I do have tail lights


Check your bulbs. There are two filaments in each bulb, one for tail light and one for the brake light, so it's possible to have a tail light with not turn signal or brake light.

Mar 20, 2016 | Cars & Trucks

1 Answer

Where is the tail light fuse?


The tail light fuse is under the rear seat on the drivers side.

Jan 17, 2016 | 2003 GMC Envoy

1 Answer

My brake and hazard lights don't work on my 2001 Chevy Astro Van. Turn signals work fine, running lights work, and the top brake light works fine. Replaced bulbs, no change, fuses are fine. Where do I look...


Buy a cheap multimeter and measure your voltage at the bulb when the brake lights are supposed to be on. You should have 12vdc. Is your 3rd brake light and brake lights on the same fuse? If not, measure to see if you have 12vdc at the fuse itself.

Mar 01, 2015 | Cars & Trucks

1 Answer

Where is the fuse for a chevorlet Lumina 2001 taillight.


Fuse boxes located under dash.under hood.in a small plastic cover on left side kick panel on drivers side.should be marked lights or tail-lts. Is all lights on rear of vehicles out or just one side or part of one side as any lights work fuse is still good.brake lights also if they work fuse good.access bulbs from trunk remove 6 screws pull cover.remove wire plug push light socket in turn back counterclockwise.

May 18, 2014 | 2001 Chevrolet Lumina

3 Answers

My back break lights isnt working and front head lights are they both connected


If both are not working, check your brake light fuse and then bulbs for burnt filaments. If ok, could be wiring or brake light switch located at the back of the brake pedal. To eliminate the switch, if your car is equipped with cruise control, try to engage it and if it works, the switch is good, if not, switch is bad as the cruise control needs a good working brake switch to engage the cruise.

Aug 14, 2011 | 1997 Oldsmobile Cutlass Supreme

1 Answer

The brake lights do not work, I have replaced all bulbs and fuse for the brakes on the dash passenger side panel. are there any more fuses?


Check the brake light switch located on the brake pedal arm under the dash. It could be stuck, loose, or needs to be replaced. Also, check for a brake light relay. Could also be a loose ground wire in the trunk close to the tail lights.

Aug 03, 2011 | Buick Regal Cars & Trucks

1 Answer

Took it to Autozone because of check engine light and they said it had to do with a brake switch on the brake pedal or something like that.


Your Brake Light Switch is located on the upper brake pedal arm located under the drivers side dash, when use you the brakes and the pedal is depressed it activates the Brake Light Switch which in turn sends a electrical signal to the brake light bulbs. That is how your brake lights turn on. It is very easy to replace if you buy the part yourself, just locate the switch under the dash and remove and replace.

Jun 24, 2010 | 2007 Hyundai Santa Fe Limited

1 Answer

My brake, hazard and turn lights dont work, i


well u have two seprate problems the hazards and turn signals have a flasher that needs replacing if the fuse is good on the fuse box marked signals .and there is a brake light switch under the dash board near the brake pedal it has two wires on it check the wires make sure they are connected if so replace the brake light switch

Nov 13, 2009 | 2002 Chevrolet Astro

Not finding what you are looking for?
1993 Chevrolet Astro Logo

790 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...