Question about 1998 Dodge Intrepid

1 Answer

P0720 error code on 1998 dodge intrepid

Shop said it is two speed sensors. Where are they located and how do yo change them?

Posted by on

  • masd925 May 29, 2009

    Ok! Now, do I go under the car? or access that area from the top?



×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 323 Answers

First buy the input and output speed sensors so you will know what you are looking for. They are located on the left side of the tranny with very similar connections. They just screw in with a socket and ratchet. Change them one at a time because they are different and you don't want to get them mixed up by pulling both before installing one.

Posted on May 29, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 dodge caravan 3.3L fault codes p0500 p0700 p0720 p0715, how do I repair and replace sensors to pass smog test


Follow the links for each fault code.
http://www.obd-codes.com/p0500
P0700 Transmission Control System Malfunction
P0720 Output Speed Sensor Circuit Malfunction
P0715 sets when there is an error in the transmission's input speed sensor signal. On the front of the trans there is an input and output speed sensor that the trans controller looks at for shifting control.

While the code could have set because of a wiring or connection problem, it's almost surely the sensor. Input speed sensor failures are not uncommon.

The input speed sensor is mounted right on the front of the trans directly under where the cooler lines attach. It threads directly in and has a 1" hex for a socket for removal. If the wiring and connection look visibly ok then I would recommend replacing the sensor

Jul 06, 2016 | Dodge Cars & Trucks

2 Answers

What are the probable causes of DTC P0720?


According to the database the code means OUTPUT SPEED SENSOR CIRCUT MALFUNCTION.

Dec 12, 2015 | Cars & Trucks

2 Answers

1998 Dodge Ramwagon 5.9L output Speed Sensor


I think you mean P0720.
The speed sensor should be mounted on the side of the transmission with either a threaded body or a flat plate with one bolt hole. Depends on which transmission you have.
You can look up the part on the online auto parts store websites to see what it looks like.

Aug 15, 2012 | 1999 Dodge Durango

1 Answer

Po731 and po700 the car don't change speed


replace the output speed sensor on you 4 speed trans, 3.3 engines only have 4 speed transmissions. The output sensor is located next to the transfer gear. Or if you are looking the two sensors, it would be the one on the right.

P700 = PCM has a transmission code in the EATX controller, and P0731= Gear ratio error in 1st. Replace the output speed sensor and clear the codes.

May 26, 2011 | 1999 Dodge Intrepid

1 Answer

What does the codes P O720 and P O734 mean in a 2004 dodge intrepid


P0720 - Output shaft speed circuit

P0734 - Gear 4 incorrect ratio

Dec 04, 2010 | 2004 Dodge Intrepid

1 Answer

1998 Chrysler Intrepid ES 3.2 Code P0731.


Check the connection to the vehicle speed sensor. You can check the vehicle speed sensor by using a voltmeter set at millivolt. Then pass a metallic object close to it. The sensor should induce voltage as you pass the metallic object close to it. If not replace the vehicle speed sensor.

Nov 23, 2009 | 1998 Dodge Intrepid

1 Answer

Need to know where is Low Output SPEED Sens RPM, Above 15 MPH located in 1998 dodge durango 5.9cc 4x4. dtc code p0720


as far as i know there is only one speed sensor and it is located on top of the rear differential should have one bolt holding it in. i believe that code says the speed sensor has a low output.

Aug 26, 2009 | 1998 Dodge Durango

1 Answer

Dodge Durango 1998 5.2L Output Speed Sensor code P0720 Location


Its in different locations depending on if its 2wd or 4wd. For 2wd its in front of the drice shaft or for 4wd its in the tranfer case, just look for a white shape like box with wires plugged into it and you need a socket to remove it, iam not sure how much it is to replace as the cost varies at different shops.

Jun 19, 2009 | 2000 Dodge Durango

Not finding what you are looking for?
1998 Dodge Intrepid Logo

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...