Question about 2001 Isuzu Rodeo

1 Answer

Isuzu Amigo 99 Driver Power window does not go up

Hi...Driver side power window is not going up. Started behaving erratic after it rained and I had the window open. After that it would ocassionaly refuse to go up, and at one point would go up and then come down half way or so by itself. Then after a cople of more days it went down and has not budged since !

Fuse box to the left of dash had a small black box with a red button. Taking that out takes out the other window too (2 door). Another black box is marked for window, but this has no button or switch on it. Since both of these boxes are unique I guess they are common for both windows. Is there somthing else can check given that only one window is out? not very familiar with mech but enjoy fiddling around some.

Thanks for your help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

Replace window regulator. It comes with the cables on it . Yours probably came off track and are tangled up.

Posted on Jun 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you convert an automatic transmision to a manual on a 99 amigo


I think you should have done more research before you started this project. The clutch wires you cant find may not exist on your Isuzu. Also the starter wont work without a signal from the clutch interlock switch. These probably also dont exist.

Sep 10, 2012 | 1998 Isuzu Amigo

1 Answer

99 amigo Timing???????


you should not change the belt maybe now its not in the same position and that's a big problem

Mar 13, 2012 | 1998 Isuzu Amigo

1 Answer

Where is the cmp located on a 99 amigo 3.2 engine


the camshaft position sensor (CPS) is located on the side of the left cylinder head. It's shadowed underneath the intake manifold.

Feb 21, 2012 | 1999 Isuzu Amigo

1 Answer

How many quarts of power steering fluid does my 1993 Isuzu Amigo hold?


POWER STEERING FLUID SYSTEM YOU POUR A LITTLE FLUID AT A TIME UNTIL FLUID LEVEL REACH THE COLD LEVEL MARK ON POWER STEERING DIP STICK DONT OVER FILL YOU WILL BLOW THE FRONT SEAL.

Oct 29, 2010 | 1993 Isuzu Amigo

1 Answer

Need belt routing diagram for 99 isuzu amigo v6


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1999/make/isuzu/model/amigo/1999_isuzu_amigo_drive_belt_routing_diagram.htm

Oct 15, 2009 | 1999 Isuzu Amigo

1 Answer

Low headlights do not work


Check your hi/low beam switch. It sounds like you are not getting power through the switch on low beams.

Dec 29, 2008 | 2000 Isuzu Amigo

1 Answer

Power window do not work put new fuse did not help this is a isuzu amigo 2000


Hi if you have changed the fuse next change the window switch (just swap it over with another one to test it), Failing that then it will be the window motor, Hope this helps

Dec 11, 2008 | Isuzu Amigo Cars & Trucks

Not finding what you are looking for?
2001 Isuzu Rodeo Logo

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...