Question about 1999 Buick LeSabre

1 Answer

99 Buick LeSabre, how do I remove driver side door panel to replace power window motor?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i repair the wiring to the other windows in my 2001 Buick Lesabre Custom? Only my driverside window and power lock works


FIRST MAKE SURE YOU DID NOT LOCK THE WINDOW, BY RELEASING THE BUTTON, THEN REMOVE DOOR PANEL ON PASSENGER SIDE , UNPLUG WINDOW MOTOR, AND TEST FOR POWER AND GROUND AS SOME ONE PUTS THE WINDOW DOWN FROM BOTH SWITCHES, IF POWER AND GROUND IS THERE REPLACE MOTOR, IF NO POWER THERE CHECK SWITCH, POSIBLE BAD SWITCH, BUT IF YOU SUSPECT WIRING , CHECK THE DOOR JUMB ON DRIVERS SIDE, INSIDE THE RUBBER BOOT MAY BE ONE OR MORE BROKEN WIRES , REPAIR THEM. NORMAL

May 08, 2014 | Cars & Trucks

1 Answer

Driver side front door window will not move. Some sound, but no movement. How to Replace Window motor regulator on this 2000 Buick LaSabre Limited driver's door with multiple controls: Locks, speakers,...


First the door panel must be removed,then you can tell what part is broken.It will probably be the window trac assy.To replace that you must drill out the 3/16 rivets that hold it in and then replacethem with 1/4 -20 bolts on re-assembly.

Aug 05, 2010 | 2000 Buick LeSabre

1 Answer

2002 Buick Lesabre drivers side window went down, but won't come back up. Can hear the electric motor working,but window dosen't move. Can't figure out how door panel comes off either.


A couple of things to add to tinyp's solution. For Buicks, the regulator is bolted in, not riveted, which makes removal easier. Also, you'd better get used to this, as I have replaced 3 out of 4 window regulators on my 2002 LeSabre.

Jun 28, 2009 | 2002 Buick LeSabre

1 Answer

Need to remove and replace the driver side door panel


Could be a bad switch, bad window motor, or clutch in window motor, ccould also be that the window itself jumped track.

Jun 04, 2009 | 2000 Buick LeSabre

1 Answer

2000 Buick Lesabre: Driver Door 1. Do I have to disarm the air bags to replace glass? 2. How do I pry off the inside driver side door panel components? 3. HOw do I replace the inside driver side...


Hello, NO you don't have to disarm airbags for glass.
You can pry off the door panel with big flathead screw driver. The panel is held on by plastic tabs that pry off and you can press them back on with fingers.
Before prying off panel, you should pry off electric window button panel. Also remove any screws that are visible. Sometimes the arm rest has little plastic covers with screws underneath it.
This is actually easier than it sounds.
Just remove any visible screws, and pry it off and lift up and she'll come off.

May 15, 2009 | 2000 Buick LeSabre

1 Answer

Trying to replace drivers window lift motor. help!!


Tape and secure window, replace rivets with 1/4 nut and bolts.

Apr 28, 2009 | 1990 Buick LeSabre

1 Answer

Need instructions for replacing 94 Buick LeSabre window module.


2002 BUICK LESABRE REAR DRIVER SIDE DOOR POWER WINDOW UP CABLE IS OFF TRACK WINDOW WILL NOT STAY UP HOW CAN I REPAIR THAT

Dec 29, 2008 | 2005 Buick LeSabre

1 Answer

Power window front passenger


I had the same problem on my 1992 lesabre. The solution is to test the window motor itself with an external 12 volt power supply ( I used the car battery and some jumper cable w/ 2 screw drivers - not recommended for amatures! LOL) First remove the door panel which is difficult but you'll figure it out if you are qualiifed to repair your window yourself. Then test the window moptor if it functions (in both directions) THEN IT IS THE WINDOW SWITCH, A FUSE OR A RELAY. If the moter does not function then replace the motor
Good Luck
You can get a new window motor on ebay or at your local junk yard or (god forbid) the dealership

Jul 20, 2008 | 2000 Buick LeSabre

Not finding what you are looking for?
1999 Buick LeSabre Logo

878 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...