Question about 2001 Daewoo Lanos

1 Answer

Engine trouble code P1627 has popped up

I have a 2001 daewoo lanos sedan 1.6L 16 valve engine. My craftsman OBD II scanner has come up with trouble code P1627. I'm trying to figure out what this means. The scanner asks me to select make of car, but does not offer a deawoo as a selection. need help soon!!! Thank!! hi i have the same problem i have a 2000 daewoo lanos i have 2 codes one is p0113 and p1627 i think i know how to fix the p0113 the guy i got it off of did not have the intake airtemp sensor i have not tryed it yet but my real problem it that p1627 what is Manufacturer contrl Aux. inputs Aux outputs and where is it on the car. if anyone can help me that would be awsome thanks

Posted by on

  • Steve Hurc
    Steve Hurc May 11, 2010

    Jumper the assembly line diagnostic link (ALDL) terminals A and B.

    tell me what flash code you get by counting flashing check engine light and ill supply flow chart!

  • Steve Hurc
    Steve Hurc May 11, 2010

    if you can give me flash code rather than scanner code eg. 34, 45, etc....

    i can help

    all codes in genuine manual are listed as flash codes with description what are your desciptions of codes?


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Daewoo Master
  • 450 Answers

This is a immobiliser code this could be induced by cycling ignition or using key or remote that has problem

Posted on Jun 29, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What do these diagnostic codes(PO106,PO121) mean for a 2000 deawoo lanos.

OBD II Fault Code
  • OBD II P0106
Fault Code Definition
The Manifold Absolute Pressure Sensor/Barometric Pressure Sensor measures the rise and fall of the air pressure inside the Intake Manifold. This provides critical data needed for the Power Train Control Module (PCM) to control the Air Fuel Ratio, the Ignition Spark Timing, and many components of the Emissions Control Systems. The Manifold Absolute Pressure/Barometric Pressure Sensor P0106 code is set when there is a problematic or erratic performance in the voltage signal to the PCM.
  • Check Engine Light will illuminate
  • In many cases, no abnormal symptoms may be noticed
  • In some cases, the engine may be hard starting and/or get poor fuel economy
  • In some cases, noticeably poor engine performance may occur
Common Problems That Trigger the P0106 Code
  • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is defective
  • Intake Manifold vacuum leaks
  • Faulty or corroded Manifold Absolute Pressure Sensor/Barometric Pressure wiring or connections
Common Misdiagnoses
  • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real cause is an Intake Manifold vacuum leak
  • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real cause is a stuck-open EGR Valve
  • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real problem is a defective Idle Air Control Motor, which causes a very low engine idle

Oct 28, 2010 | 2000 Daewoo Lanos

1 Answer

Stalls, tried to start engine doesn't start anymore. now sittin on my garage

What codes are coming up on the OBD-II Scanner if any? If the engine doesn't work codes may be stored in the computer.

Also, when you say it doesn't start, do you mean that it doesn't 'turn over' when you twist the key all the way forward to the start mode for the starter?

Or,do you mean that it 'turns over' but doesn't actually get the engine to run on its own power.

If it is the former, then you may have a dead battery by now, or the starter is going bad.

If it is the latter, then I would check for engine codes for things like a crank sensor not sensing movement, or a MAP sensor (if equipped) not sensing pressure in the intake manifold.

If you don't have a scanner, you can get one at Walmart for under $100 to scan OBD-II codes. That's what i did for my 1997 Cadillac which also uses OBD-II (since 1996).

Good luck on this repair.

Jul 19, 2010 | 2002 Daewoo Lanos

1 Answer

I have a 2001 daewoo nubira and my obd II scanner gave me the code of P1627 can any one assist me with this problem.

Code P1627 description is as follow: TCM/transmission control module/ or ECM/engine control module/ convertion malfunction.If your Nubira has automatic transmission and do not moved - change TCM. If there is any engine problem-change ECM. Use your OBD || scanner to delete trouble code and check again/make new diagnostic test after few minutes.If come again-go to change.

Jan 12, 2010 | 2001 Daewoo Nubira

1 Answer

Error code P1627

The fuel level sending unit in the fuel pump. That float thing attached to it. That is what the code is and also why the fuel gauge does not work.

Jun 02, 2009 | 2001 Daewoo Lanos

1 Answer

Engine trouble code P1627 has popped up

p1627 which is explained as
Manufacturer contrl.
Aux. inputs
Aux outputs

it means there's a problem on either aux input or the output try to check both connection.

Apr 04, 2009 | 2001 Daewoo Lanos

4 Answers

Diagnostic codes for 200 Daewoo Lanos..........

Do you feel a misfire?? Random misfires are usually caused by a lean fuel mixture, the reasons that cause this a to many to list here.

Jul 23, 2008 | 2002 Daewoo Lanos

1 Answer

Daewoo lanos

Do yourself a favor, and go down to your local Auto Zone. There, you can basically rent a OBD II scanner. Once you return the scanner to the store, you get all your money back. There is no cost involved, just a security deposit. OK, so now you take the scanner, scan for codes, if any are found, the tool has a code data base on board. If you wish to do so, I think you can simply scroll down the complete list of codes for your car, and see what they are for. Good luck. By the way, if the scanner finds a fault, it will tell you what the issue is.

Jun 30, 2008 | 2002 Daewoo Lanos

Not finding what you are looking for?
2001 Daewoo Lanos Logo

Related Topics:

1,739 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

75822 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides