Question about 1990 Ford Bronco

2 Answers

E40d trany will not shift into higher gear but works manualy from 1-2 gear

My problem is that in my 1990 full size ford bronco the E40d trany will not shift into high gear only manualy from first to second

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There are no vaccum lines on an e4od. i am having the same problem and have changed mine out already and still have the prob. i read on full size bronco dot com that it may be due to a sensor in the alternator. I am going to try that next. another site said something about By the way I now have an extra e4od ****** for sale.

Posted on Apr 11, 2012

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Sounds like a bad trans.
could be a shirft modualter which is vaccumm controlled.
check that before taking the trans out.

Posted on May 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 91 bronco with an automatic transmission that wont shift on its own. It will shift fine if you run it through the gears automatically,but doesn't shift when its in drive.


91-bronco-automatic-transmission-wont-h3u3bvaxgt5rbqkhjnnyjnme-5-0.jpg
this is the modulator this one is pre-adjusted for A4ld
91-bronco-automatic-transmission-wont-h3u3bvaxgt5rbqkhjnnyjnme-5-2.jpg
this is the other one that is adjustable for the c-6 trans
91-bronco-automatic-transmission-wont-h3u3bvaxgt5rbqkhjnnyjnme-5-5.jpg
E40D trans they are all different and maybe you'll find it now there is 4.9 motor 5.0 5.8 and all can come with A4ld /E40D / or C6 transmission look for broken or disconnected vacuum lines or if the engine is running rough you must correct the running condition because you are loosing vacuum inches and the trans needs vacuum at a certain level to shift if the engine stutters your loosing the vacuum and it will never shift that's what this sounds like to me or that modulator needs adjustment or to be replaced later man! it's party time!

Mar 20, 2015 | 1991 Ford Bronco

1 Answer

1988 ford bronco full size 4x4 installed new fly wheel and now it will not shift out of low gear


check that you have installed the gear lever in the shift rail when you refitted the lever tower on top of the box

Nov 07, 2014 | 1988 Ford Bronco

1 Answer

SHIFTER


IF YOU ARE LOOKING AT PUTTING IN A FLOOR SHIFTER B AND M SHOULD HAVE A CABLE KIT FOR THAT

Apr 23, 2014 | 1992 Ford Bronco

1 Answer

1992 Ford Bronco Transmission Problems (E4OD)


Here is what code E40D is:
TRANSMISSION - E40D - DIAGNOSTIC TROUBLE CODES - WATER INTRUSION OF THE MLP/TR SENSOR
TRANSMISSION - E40D - POSSIBLE WATER INTRUSION INTO THE MLP/TR SENSOR CAUSING SHIFT CONCERNS AND/OR HARSH ENGAGEMENT CONCERNS
TRANSMISSlON - E40D - SHIFT CONCERNS AND/OR HARSH ENGAGEMENT CONCERNS DUE TO WATER INTRUSION OF THE MLP/TR SENSOR
1989-94 BRONCO, ECONOLINE, F-150-350 SERIES, F-47, F-53, F-59
here is possible fix:
ISSUE: Some vehicles may exhibit a shift concern and/or a harsh engagement concern due to water intrusion into the MLP/TR sensor and vehicle harness. There may also be a number of different DTC's along with those concerns.
ACTION: Replace the MLP/TR sensor and vehicle harness connector if signs of water is evident.

Jan 18, 2010 | 1992 Ford Bronco

2 Answers

I have a Ford 1995 Ford F150 4x4 with 5.8L and E4OD trans.My problem is a vibration occurs at approx. 60,80 and 100 kph.I have changed all wheel brgs.drive shaft,transfer box,rear end overhauled--so think...


I also have a 95 Ford F150 4x4 5.0l, extended cab two piece drive shaft. E40d trany in fourth gear accelerating or not it will vibrate badly but only slightly in any other gears. The first thing I did was rebuild the trany, no luck same exact conditions. All clutchs and bands replaced, synthic fluid, new torque converter, and a shift kit from TCI. Still does the same thing.

Nov 12, 2009 | 1995 Ford F150 Styleside Regular Cab

1 Answer

Will 1995 transmission work in 1991


i would think you would be fine, just swap the computers for the trannsmission as well

Sep 24, 2009 | 1991 Ford Bronco

1 Answer

1988 Ford Bronco Transmission Issues


is the idle speed correct? do you shift into second before trying to engage reverse?, is the clutch ok, this is most likely not the trans at all but one of the above issues, the clutch is my guess.

Sep 14, 2009 | 1988 Ford Bronco

1 Answer

Won't come out of 4 low and won't change from 1st to 2nd gear


try checking your auto trani fluid... and with the 4 wheel drive try puting ti in nuteral and if the doesnt work try puting it in reverse and back up after taking it out of 4 wheel drive.

May 24, 2009 | 1996 Ford Bronco

1 Answer

My e40d from a 96' f150 shifts irratically on 3rd


could be pressure also overdrive switch relly need trans could

Apr 01, 2009 | 1995 Ford Club Chateau

1 Answer

Shifting problem


hello this could be a problem in the drive band from what you explained you can try a bottle of shifting treatment its possible it could be a port in the valve body stuck for drive if this doesnt help theres a good chance drive band is gone and tranny needs to be rebuilt goodluck

Sep 18, 2008 | 1997 Lincoln Town Car

Not finding what you are looking for?
1990 Ford Bronco Logo

386 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...