Question about 2004 Dodge Intrepid

1 Answer

Po340 and po344 intrepid

Engine light comes on my 2004 chrysler intrepid.....po340 and po344 cam sensors...what do i do now and about how much will it cost?

Posted by on

  • Anonymous Mar 24, 2014

    NEED A PO340 AND PO344 WHAT IS THE COST

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 410 Answers

Take a look at this link http://www.obd-codes.com/p0340.  The problem lies in the cam shaft sensor circuit which means that it isn't necessarily the sensor itself.  Read what that page has to say and just start from the top and work your way down the solutions.  As far as how much it cost, it obviously depends on what is wrong, but assuming it is your cam shaft sensor you can buy the part for around forty dollars at AutoZone.  Let me know if you have any other questions.  Thanks for rating my response and for using FixYa!

Posted on May 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a PT 2010 & the diagnostic codes are PO340, PO344 and PO325. mechanic is suggesting replacing the cam shaft post sensor & didn't even mention the knock sensor. Am I dealing with 1 or 2 issues


you are dealing with 2 issues
code p 0325 refers to knock sensor (KS) 1 bank 1--circuit malfunction ====causes ---wiring ---poor connection ---KS
code p 0340 refers to camshaft position sensor(CMP) sensor A bank 1--circuit malfunction===causes wiring--- CMP sensor ---ECM
code p 0344 refers to CMP sensor A bank 1 --circuit intermittent===causes --wiring --poor connection---CMP sensor --ECM
check wiring and connections before replacing the CMP as the wiring may be the cause of all the codes

Oct 21, 2016 | 2010 Chrysler PT Cruiser

1 Answer

Codes po340 2004 Sebring


DTC code is P0340 no cam signal at PCM. Chrysler always used to say replace the cam and crank sensors together..wouldn't pay our warranty time at dealer unless we replaced both.

Aug 21, 2014 | 2004 Chrysler Sebring

1 Answer

Got code po340 on 2008 Chrysler PT cruiser. Runs great sometimes when engine light on & rough at other times like not getting gas. Engine light does not come on every day either. Cam sensor or timing...


P0340: Camshaft Position Sensor A - Bank 1 Circuit Malfunction

- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Camshaft Position Sensor
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery

Feb 08, 2012 | 2008 Chrysler Pt Cruiser

1 Answer

We cant clear the code po344 and we have replaced t cam sensor.


This is common, i've run into this problem, the aftermarket sensors are not right you will need a dealer sensor and theres an update reprograming that needs to be done so the crank and cam sensors algin and the light wont come back. hope this helps, you can try taking it to the dealer and see if they can reprogram with that sensor but it needs the updated program, there ar tsb bulltins on this is you reseach this it will explain it, also another problem depending on the engine you have is the cam gear spins a little making the reading off.

Nov 05, 2010 | 2004 Dodge Intrepid

1 Answer

Have2004 intrepid shows engine light and error codes po340-& po344


code po 340 no camshaft position sensor signal at powertrain control module and code po344 rationality error detected for intermittent loss of camshaft position sensor circuit. hope this will help you!!!!

Apr 18, 2010 | 2004 Dodge Intrepid

3 Answers

How can i fix code po344 intrepid 2002


Before replacing the cam shaft sensor,verify good terminal tension and connection at the sensor.This carline has a history of faulty connections here and this could fixya before spending the cash on car parts....good luck

Jul 24, 2009 | 2004 Dodge Intrepid

1 Answer

I'm getting the engine light coming every so often. It seems that after I fill the tank and get down around 3/4 tank, The message I'm getting is "EVAP Emission Control System Purge Flow Fault". PO441 and...


I have a 2004 dodge stratus 2.4 dual overhead cam. When driving down the road, bell goes off, check engine light comes on, and it's like I'm driving on limp mode, when going over 2000 rpm's, there's a severe stutter. After getting code for light it points to cam shaft sensor, which i changed. I also changed crank shaft sensor. After all of this was done, drove great for about 30 miles and the same thing happened all over again. If anyone can point me in the right direction it would be greatly appreciated.

Jul 05, 2009 | 2004 Dodge Stratus

1 Answer

I have a 2000 chrysler concorde that the engine light just popped on - the error codes are po302, po420, po340


P0302-cylinder #2 misfire detected
P0420- catalyst efficiency below threshold bank 1
P0340-No cam signal at PCM.
The Cam sensor most likely needs to be replaced first. Clear the codes after that and drive and see what comes back on.

May 29, 2009 | 2000 Chrysler Concorde

3 Answers

Trouble codes and why


p0325 is the knock sensor
p0301 is misfire on the #1 cylinder
p0582 and p0340 i don't know

check to make sure the oil is full and in good shape ... if it is replace the knock sensor, drive it for 20-30 miles and recheck codes.

Mar 19, 2009 | 2002 Dodge Intrepid

Not finding what you are looking for?
2004 Dodge Intrepid Logo

1,414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...