Question about 1999 Ford F250 Regular Cab

1 Answer

Four wheel drive not engaging

I have a f-250 diesel, the four wheel drive will not ingage but the light is onsaying it is. When the four wheel drive is not engaged and the light is off ther is an intermitant vibration noise. The driver side hub is very hard to turn, I can only drive the truck in 4x4 mode with out haveng any vibration noise, any suggestions

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

Check the front wheel bearings for play and also while the wheel is off the ground lock the front hubs, grab the axle behind the wheel and see if it is engaged. If not then you will need to take the hub apart and find out what is broken.

Posted on May 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 2010 Nissan frontier se 4x4 double cab, four wheel drive will not engage, light flashes on dash showing transfer and front axle not engaging


Possibly the vacuum line off the engine or transfer switch on shifter that ingages 4x4 front. Most are vacuum actuated and unless getting vacuum will not work. Check the vacuum lines.

Jun 19, 2017 | Nissan Cars & Trucks

1 Answer

I have a 2002 Ford F-250 7.3 diesel auto transmission. When I shift into 4 wheel drive the indicator light comes on and when I drive it feels like the 4 wheel drive in engaged, but when I hook up my...


Lock in your 4 wheel drive, and get under the truck, and try to manually turn the front drive-shaft. If the drive-shaft spins freely, then your 4x4 is not locking in correctly, and you may need to replace the lockers.
Good luck!

Oct 19, 2013 | Ford F-150 Cars & Trucks

1 Answer

Chevy 4x4 indicater light shows 4x4 working but only rear wheel drivv


didnt specify year or model but problem is usually the transfer case actuator sticking there are four bolts holding actuator in place remove and lube actuator usually frees it up

Dec 09, 2012 | Cars & Trucks

1 Answer

2003 kia sportage 2l wont engage four wheel drive light comes on but doesnt engage


This is a long/hard one to answer as a few things can cause this. First, check the vacuum lines running from the engine down to the front axles for cracks, and make sure you have vacuum to the axle hub. Second, remove and inspect the front wheel bearings, they should be set to proper preload and there should be no signs of water in the hub. And last if there is water in the hub, that most likely means there is rust on the front axle, and the pitting caused by the rust will not allow vacuum to build up and ingage the four wheel drive. the later requires a new front hub kit $$$.

Feb 21, 2010 | 2002 Kia Sportage

1 Answer

Four wheel drive will not ingage in four low it only locks in hi


Vacumm leak in front axle preventing engagement.

Jan 23, 2010 | 1987 Jeep Wrangler

1 Answer

FOUR WHEEL DRIVE WILL NOT INGAGE ,LIGHT DOES NOT CAME ON ,( 15A FUSE -OK)


four wheel drive will not ingage, light does no come on

Jan 08, 2010 | 2002 GMC Envoy

1 Answer

1979 ford f-250 four wheel drive won't engage


I take it the transfer case shifter feels okay (shifts through all four gear positions), so try jack up one side of front end, rotate wheel while looking in knuckle to see if drive axle turns, if it does, then hubs engaged. Now if someone holds the front d shaft, and wheel won't turn, then both hubs are engaged. Next put t case in 4xhi or 4xlow, if you cant turn the wheel, then the t case is engaged, and all is normal. If wheel still turns at this point, then the t case is not engaged for some reason, but post again if it does. Hope this helps.

Jan 04, 2009 | 1979 Ford F 350

2 Answers

Trnsfer case wont engage


This vehicle has a solenoid on the front differetial that switches between 2W and 4W drive. The mechanism also contains a swtich that tells the truck what position it is in. Your problem may be a faulty solenoid. It is relatively easy to replace.

Dec 22, 2008 | 1999 GMC Suburban

3 Answers

1996 JIMMY / 4 WHEEL DR DOESN'T ENGAGE but LIGHT TURNS ON


Check the vacume line to the accuator for the cable, mine was rotted and busted. Replaced it . it goes under the battery. Problem solved

Dec 02, 2008 | 1996 GMC Jimmy

Not finding what you are looking for?
1999 Ford F250 Regular Cab Logo

525 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...