Question about 2006 Audi A4

1 Answer

Need to program/link garage door opener with the one on the visor in the car

Lost owners manual. need to program/link garage door opener with the one on the visor in the car.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 241 Answers

Depending on the name brand of the garage door opener, there is a button on it you press and you have about 30 seconds to set the button in the car to the signal. Read you car manual on how to set the visor opener, probably press and hold the button in after pressing the button on the garage door opener motor. Get someone to help you in the garage on a ladder. Mine is a Sears and this is how it works.

Posted on May 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sinc garage door opener with a 2009 Hyundai Sonata


Take your remote and hold it up towards your rear view mirror or your visor whitchever is the one with 3 buttons of your homelink , also make shure that your opener has a program button which come in different colors depending on the year of the machine, if you have a program button on your powerhead of your garage door opener then you can mostlikely program your car to it! The button on garage door opener comes in different colors such as yellow,green ,orange, black, grey and black ! make shure your opener has one of these buttons! Now take your remote and point it within a few inches of your visor/rearview mirror and hold the button down that oppens that door....now press the first button on your car mirror/visor until the door opens up , it take sometimes a few trys but remember to leave your car running while doing this and have it outside the front of your garage door while doing this!

Dec 03, 2013 | 2009 Hyundai Sonata

2 Answers

Remote door opener


So, you get out your remote control to your garage door opener and, then get your owners manual to your new car. You need to follow the instructions from the manufacturer to be able to program the remote control to the car.

Ok, you have followed the instructions from the car manufacturer and you press the button for the garage door to go up.......and nothing happens. So, then you think you have missed a step on the programing. Well, what most instruction manuals leave out is the step from programing the car/truck/van to the garage door machine itself. On the back side of your garage door opener is a panel called the logic board. The logic board is the computer or brain of the machine. Most new garage door openers now are a mulit-code machine. By that, i mean it uses several signals each time you press the button on your remote control. This is for security, so your code can't be stolen by a code-grabber.

Now, comes the step of programing the vehicle to your garage door opener. Once you have followed the instructions of programing your vehicle, you now have to "teach" the car to the garage door opener. You will need some help doing this. You will have to get someone to press the button in your vehicle and hold it down, while someone else has to press the learn button on the back your your garage door opener mounted on the ceiling. The learn button on the back of your machine will be square if using a liftmaster machine. Craftsman, Liftmaster, Chamberlain are all the same. Their learn buttons are square, and usually are yellow, red/orange, or purple. If using a Genie, it has a button that says "learn button".

The person pushing the button on the machine will only have to push and release the learn button. DO NOT hold this button down. If you do, it erases all of the programing in the machine, and you have to re-program all the remote controls that you have. You will have to read my other hub to find out how to do that. You will probably say a few words you shouldn't either. :-) Programing the vehicle to the machine only takes a second, and when the machine accepts the code, the light bulb on the machine should flash for a brief moment, and you should hear audible click. Yep, it's that easy! I dont know why the auto makers leave that step out. Anyway, i hope this helps, and if you have any questions.. leave them in my comments and i will try to walk you through it. See the photo above and you will see the typical logic board...the square red/orange learn button is easy to see. Just remember to press and release

May 08, 2012 | 1995 Lincoln Town Car

1 Answer

How to program the garage door opener


Hold down the 2 outer buttons until the red light flashes (20-30 seconds) and release.
Select one of the 3 buttons you want to program and press that button.
Hold the handheld transmitter 1-2 inches from the visor transmitter.
Using 2 hands, press and hold the button on the handheld remote and the visor remote at the same time.
Continue to hold both buttons until the red light on the universal transmitter flashes first slowly then rapidly.
Release both buttons when the rapid flashing begins.
The transmitter is now programmed.
Note that if the remote doesn't open the garage door, your opener may have a "rolling code" or "code protected " feature.
If your opener has a rolling code feature then you will have to train the opener to accept the visor transmitter. See the owners manual for the opener.
I hope this helps you out. I do not have this feature in my car, I took the instructions from a ford manual. The manual also gives a phone number to call if you have problems 1-800-355-3515 (Homelink). I don't know if this number is still good or not. It can't hurt to try it out. Good Luck!


Apr 10, 2010 | 1999 Ford Explorer

1 Answer

Programming garage door opener in the visor of the 1999 nissan quest


here is a link to the owners manual for a 1999 nissan quest. The instructions for programming a garage door are on page 2-27. Copy and paste the link in your address bar. I hope it helps.


http://www.nissan-techinfo.com/refgh0v/og/quest/1999-nissan-quest.pdf

Oct 08, 2009 | 1999 Nissan Quest

1 Answer

How do I program the garage door opener on the sun visor?


Directions are in your owners manual. Most are done by holding down the sun visors button until it flashes, then hold your opener next to the visor and push your openers button.

Sep 22, 2009 | 2000 Volvo S70

3 Answers

How to program the volvo V 70 XC 2008 garage door opener


Simply hold down the button you want to use (there are 3 for up to 3 different garage doors) until the light flashes and keep holding it down. Now place the garage door opener up near the sun visor and hold it's button down until the light on the on button you are programming flashes. It is now programed. The other 2 are done the same way. Good luck. It took me a while to find the info, it's not in any Volvo manuals I could find.

Mike

Apr 26, 2009 | 2008 Volvo XC70

2 Answers

Program my garage door opener


What the last guy post is correct, but you have to tel your car what kinda remote you have. Assuming you have homelink Which 95 percent of the cars do ill give you a very short version on how to do this. First thing you need to do is clear the code in your car from any other owners. Do do this turn your car's key to the on or acc non running position. Press and hold the first and last button. Untill the light reacts different ether starts flashing or flashes faster etc. Then you need to get one of your remotes. Press and hold the button you want to set in your car and press your remote button at the same time untill the light reacts diferent. Mind you hold your garage remote as close to your car remote as you can. Then finally Find your learn button on your garage door opener it's self it can be in the back or the front if its in the front you have to remove the cover press the button once DO NOT HOLD IT. then go to your car and press the button you set for about 2 seconds and repet 1-2 more times untill your garage door moves. Make sure nothing is in the way of the garage door. (I know that should go with out saying.)

Dec 29, 2008 | 2001 Chrysler Sebring

2 Answers

Garage door opener 96 LHS


clear the 1-3 buttons on your visor by holding them down until you do not see the blinking light next to it ,after the light shuts off you can take your remote and aim it at the mirror or visor where your 3 buttons are located ,while holding down the button of your garage door opener press the button on you visor/mirror that you want to program it take a few minutes but it can also be programed from the opener smart button ,but you have to get the button in the car to learning mode first , you also can check your owners manual and it will also have information on how to program and also your car dealer can also do it for you when you get your oil changed! i hope i was able to help you and if i was helpful please leave me a nice rating thank you Sincerely glenn mayer

Dec 05, 2008 | 1996 Chrysler LHS

1 Answer

Garage door opener on sunvisor (02 Expedition)


Rather than try to explain it here, I'll give you a link where you can download the Owner's manual. See page 86 for information about the HomeLink system. That includes the procedure you need.

http://www.motorcraftservice.com/vdirs/SPubs/default.asp?TYPE=OWNERGUIDE&pageid=oghome&gutsid=spubs_serv_all_new&YEAR=2002&VEHICLE=Expedition

Oct 13, 2008 | 2002 Ford Expedition

1 Answer

PROGRAMMING IN CAR GARAGE DOOR OPENER TO GARAGE DOOR


Usually you just hold down the button in the visor, and while you're holding it down, aim your garage door opener at it and hold that button down so the frequency is grabbed by the built-in opener. That's how it worked in a few other cars that I've seen - try it out and see if it works for yours.

Sep 09, 2008 | 2002 Honda Civic

Not finding what you are looking for?
2006 Audi A4 Logo

1,224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14195 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...