Question about 1999 Buick LeSabre

1 Answer

How do I reset my Check Engine Light?

I need to reset my check engine light. 99 Buick Lesabre Custom

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

You could go to an auto parts store and they can reset it for you, or you could pull your battery cables off the battery and hold them together for about 10 sec. that will clear any codes.

Posted on May 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 LeSabre engine is struggling and the check engine light is flashing what's causing it


Flashing check engine light means don't drive it. It can damage things. Get a code scanner from auto parts store, rent it buy it etc. run the scanner to see what it says

Sep 09, 2015 | Cars & Trucks

1 Answer

How do I reset abs and traction control light on 2001 Buick Lesabre custom 3.8


No such thing

Your asking how to clear the dash light
& all data, needed to find the problems

It will come back, until you check for codes,
& diagnose them & make the required repairs

Sep 30, 2014 | 2001 Buick LeSabre

1 Answer

I have a 2005 Buick Lesabre. How do I reset the check engine light?


WHIT A SCANNER IF THE PROBLEM PERSISIT SHE WHILL CAME BACK NEED TO TAKE THE CAR TO A MECANIC

Sep 02, 2014 | 2005 Buick LeSabre Custom

1 Answer

99 Buick Lesabre Check engine light flashing.I changed wires and plugs but still misfiring on one cylinder, but all plugs are firing. Have 84,000 miles and has been running great until light came on and...


From the symptoms of the problem and the precautions you have done i think its time to check the EGR valve.Clean your EGR valve and then put it again. How handy you are in ding this?

As the check engine light is on did you scan for error code which will help you more specific to locate the problem.

Sep 23, 2011 | 1999 Buick LeSabre

1 Answer

How do you turn off the "CHANGE OIL SOON" light


For Buick Le Sabre, 1995-99, when "CHANGE OIL SOON" light is on:
  • Access the reset button in the glove box (refer to car manual if required).
  • With the engine off, set the ignition switch to the RUN position
  • Press and hold the reset button in the glove box for at least 5 seconds
  • The light should blink a few times (4) then go out!
Hope it helps: let me know how you go.

Dec 14, 2010 | 1998 Buick LeSabre

2 Answers

How to reset the oil life monitor


1994-99 BUICK LESABRE
CHANGE OIL SOON Light
1. CHANGE OIL SOON light will come on when engine oil has broken down enough to require changing. After changing oil, reset oil life display.
2. To reset light, turn ignition on. Open glove box to access oil reset button. Press and hold oil reset button in glove box for at least 5 seconds, but not longer
than 60 seconds. The CHANGE OIL SOON light will flash 4 times to indicate light has been reset.

May 14, 2010 | 1999 Buick LeSabre

1 Answer

2002 buick lesabre check engine light on. need a


It would be better if you got the codes read and then post back with the code.There are numerous codes that can cause the check engine light to go on.Auto Zone will do this for free.There are a few other parts stores that do this for free also.Hope this helps.Good luck.

Mar 15, 2010 | 2002 Buick LeSabre

2 Answers

How long does it take check engine light to go off after map sensor is replaced. Car is a 1998 buick leSabre. Code reader pointed to map sensor. I understand it takes several starts for light to reset so...


you can take of the ground of the battery of the car for 30 minutes and the computer will reset. if you drive around without reseting the computer might figure it out after 30 miles.

Feb 09, 2010 | 1998 Buick LeSabre

1 Answer

The check engine light is coming on my 99 buick la sabre


Take it to a local auto parts store (Autozone, Murray's, Checkers, Napa) have them hook up a scan tool to get the diagnostic codes, write them down and post them here so we can further assist you. There are many reasons that can cause the check engine light to come on.

Jan 11, 2010 | 1999 Buick LeSabre

1 Answer

99 buick lesabre, battery ok, turn key to start, nothing


The security system (VATS/PassKey) is faulty. You can find a great write-up here: http://newrockies.ca , it was the only thing that saved my Park Avenue.

Oct 16, 2009 | 1999 Buick LeSabre

Not finding what you are looking for?
1999 Buick LeSabre Logo

1,125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...