Question about 1993 Buick LeSabre

1 Answer

Serpentine belt I have a new serp belt and I have been told that I do not need to remove the motor mount the car is a 1995 Buick Park Avenue. Is there a way to get the belt on without taking the motor mount off. If any one can help me please. Thank You John P.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

You do not need to remove the mount, but one of the bolts on the lower portion of it. You will need to remove the 15mm nut, then the stud comes out with a reverse torx bit. The collar in between the mount will come out with some work. Then you can remove the belt with the mount still in place.

Posted on May 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i install new serpentine belt?


You'll have to buy or rent the tool used to release the spring tension on the belt by the idler pulley. While holding the tool in position to release tension., grab the belt and bull it off one of the other pulleys. Let go of the tool to remove the belt. Pay attention on how it wraps around the other pulleys or observe the belt routing diagram on the label under the hood

Nov 17, 2015 | 1995 Buick Park Avenue

1 Answer

Do you need to remove the l/h side motor mount to replace serpentine belt on a 2001 park avenue?


No it is not necessary to remove the motor mount on either the standard 3.8L or the super charged engine. Just remove the tension on the tensioner and remove the belt or belts, both will come off without removing the motor mount.

Apr 11, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

Buick park avenue 1995 how to replace serpentine belt?


to change belt you have to look under car and remove the long bolt that goes all the way through it is located on the passenger side .once u loosen the belt and try to take it off you will notice the screw

Nov 08, 2010 | 1995 Buick Park Avenue

1 Answer

How do I replace the serpentine belt on a '99 Buick Park Avenue?


yuo will be disapointed to find out that on some of these you have to remove the motor mount and sometimes even the drive axle to rout the belt.

Sep 11, 2010 | Buick Park Avenue Cars & Trucks

3 Answers

Can not get the serpentine belt around the motor mount


on some of the 3.8 you do have to remove the motor mount,there is no way around it. It is not as bad as it sounds.

Feb 20, 2009 | 1993 Buick LeSabre

1 Answer

Can not get the serpentine belt around the motor mount


You need to remove the mount, no other way to get the belt on, Labor time is over 1 hour for someone that has done them before.

Jan 24, 2009 | 1996 Buick LeSabre

1 Answer

1997 Buick Park Avenue


This is the diagram but you should have factory belt diagram sticker is still somewhere under the hood
If not:
http://www.mvreader.com/multiview/dayco/zoom.php?zoom_item=C0001D&l=n&catalog=auto&category=
To replace the serpentine belt on a V6 3800 you must jack up the motor and remove a motor mount. You must then use a breaker bar with a socket (13/64") and pull it toward the front of the car to release the belt tensioner. Put the new belt on, tighten it, put the mount back on, and lower the jack.
Driving without a belt can cause the motor to overheat, will cut power steering, and will not recharge the battery, so you should probably get a tow
Good Luck

Jan 08, 2009 | 1997 Buick Park Avenue

1 Answer

Serpentine Belt Installatrion


yes you do but you need a engine hoist to lift engine to get belt around mount....

Dec 11, 2008 | 1997 Buick Park Avenue

1 Answer

I need a 93 Buick Park Avenue Supercharger diagram for the serpentine belt ASAP


the park ave i was working on had a super charger.with 2 serp belts.i just kept at it n got them on right .trial n error.i need to know if i could get a price for some used parts i got .3800 heads,3800 supercharger,oil pan with pick up tube ,valve covers,complete intake with all injectors

Nov 30, 2008 | 1995 Buick Park Avenue

Not finding what you are looking for?
1993 Buick LeSabre Logo

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...