Question about 1995 Pontiac Bonneville

2 Answers

96 bonnee just wont turn over with intake off

I replaced the intake manifold gasket. drove it for two months and it wouldn't turn over . i then tore the top end back down and tried to do it manually . can anyone tell me what is going on or where to find a complete teardown manual not haynes or chilton

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 14,036 Answers

Try dealership or go on internet look for factory repair manuals.for individual cars.they cost about$100.00 but its worth it .its got every thing about your car.

Posted on May 29, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 166 Answers

Hi the upper plastic intake goes bad and lets anti freeze fill the cylinders usly you need th replace the upper intake good luck

Posted on May 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i stop a leak from intake manifold gasket?


Please take your vehicle to a qualified mechanic. A leak in the intake manifold gasket can cause catastrophic results not only are you losing coolant to the outside but may also be leaking coolant internally which could contaminate the oil and cause the engine to fail due to loss in lubricating properties. Also, if not torqued properly you may have a warped intake manifold. Please see a good mechanic it may cost more but you risk a much larger cost to replace an engine

Aug 03, 2016 | Cars & Trucks

1 Answer

Torque specifications for manifold gasket bolts on a 94 olds 88


Intake manifold-to-cylinder head bolts....96 in-lbs
Intake manifold, upper to lower bolts ....132 in-lbs

Tighten all bolts from center of manifold towards the ends.

Sep 16, 2015 | 1994 Oldsmobile 88

1 Answer

1999 escalade turns over wont start after replacing water pump and intake manifold gaskets


Are you getting fuel to the injectors and spark to the plugs ?
Any chance something is not hooked up, or the distributor was not re-installed correctly ?

Dec 13, 2012 | Cadillac Escalade Cars & Trucks

1 Answer

I have a 90 Chevy 1500. 305, blew the head gaskets. Replaced them, but now I have no compression in cylinder 1. But before I tore the engine apart I tested the compression with my thumb and it blew it off....


Could be hydraulic lifter is holding valve open. Bring no 1 cylinder to TDC firing Lock engine from turning and with adaptor inject air to cylinder. If air comes out intake manifold then intake valve leaking. If comes out exhaust, you guessed it exhaust valve not closing. If comes out sump then bypassing rings. If comes out of radiator , head gasket leak into cooling system

Nov 17, 2012 | Cars & Trucks

2 Answers

1999 mercury grand marquis occcasionally overheats, blows antifreeze out around radiatior cap & has a gurgling sound coming from passenger floor/dash area. Have replaced thermostat, hoses, waterpump,...


The Grand Marquis's have a know problem that causing overheating. The intake manifold cracks around the water inlet tubes on the intake manifold causing it to loose anti-freeze which in turn causes overheating. Mercury has a beefed up replacement intake manifold that cures the problem. It was a subject of an unannounced recall but they would replace it unless the problem occurs. The recall was for 7 years which the 1999 model wouldn't qualify for now. It happened to me and cost about $450.00 (parts and labor) to fix it. I used a local repair shop to do the work. If, after the engine is hot, you hear water/steam coming from the top of the manifold, you have the problem

Feb 18, 2011 | 1999 Mercury Grand Marquis

3 Answers

I have a 96 grand am and it started leaking coolant from somewhere around the manifold, i can't tell exactly where it's coming from. Does anyone know it that could be the termostat?


If its a v6 engine and the leak is by the intake manifold, then you need to replace the intake manifold gasket. This is a very, very common problem on all of GM's v6 engines. It will cost you about $350-$400 for this repair.

Jan 20, 2011 | 2004 Pontiac Grand Am

1 Answer

How to replace the intake manifold? I have a 96 grand cherokee v8, unable to replace the thermostat housing to the manifold because one of the screw holes cracked off on the manifold.


Position The Intake Manifold Gasket On The Engine.Dowels May Be Provided To Hold The Gasket In Place During Manifold Installation.. The Use Of Silicone Sealer Is Required. Especially Where The Front And The Rear Seals Meet The Side Gaskets On V-type Engines. Installing An Intake Manifold On V-type Engines Can Be Difficult. It Is Critical That You Use Sealer Properly On The Engine To Prevent Vacuum,Coolant, And Oil Leaks.

Start All The Fasteners By Hand Before Tightening. This Will Aid In Bolt Hold Alignment. Then Torque The Intake Manifold Fasteners To Specifications. Use The Specific Torque Pattern Given In The Service Manual.. Basically The Pattern Will Be A Crisscross Pattern

Apr 09, 2010 | 1995 Jeep Grand Cherokee

1 Answer

My 96 altima has a rough idle problem.


Sounds like you could have a vacuum leak in the intake manifold due to a faulty gasket, spray the gasket down with parts cleaner, csee if the idle smoothes out if it does you have a bad manifold gasket.

Sep 28, 2009 | 1996 Nissan Altima

1 Answer

1996 dodge caravan 3.8,had egr valve replaced


you got the head gasket on upside down, or you tore the intake manifold gasket.

Jun 22, 2009 | 1996 Dodge Caravan

Not finding what you are looking for?
1995 Pontiac Bonneville Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...