Question about 1994 Chrysler Concorde

1 Answer

94 Chrysler Concorde Tranny Problems

Eek, this sounds alot like a problem i was experiencing about two years ago with my '94 concorde. the problem was diagnosed as a faulty "shorted relay" part number iso 8- 52 - 328. the tranny has been working pretty well since then. my most recent problem has been the transmission not wanting to engage in reverse after shifting to reverse - just sits there. the past week though its been working fine. oh well. good luck I have a 95 Chrysler Concorde, I put it into reverse the other day and something went very wrong, I had the wheel cranked all the way in one direction, while backing up. Then it stopped, i no longer had reverse, I put it into drive, and drove about a mile down the road, and then, It stopped i had no drive gears. I shut it off and started it back up, then I had low gear, but as soon as it would try to shift it would all go away, back to nothing,so then i would have to shut it off again, if I put into low gear, then it will continue to drive in low gear, but still no reverse, and only low gear, but if it is in drive it will try to shift, then everything is gone and it will not shift back down, I have to shut it off and start it back up, which makes me think its not mechanical, but maybe electrical. could anyone tell me?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 1,889 Answers

Have your transmission oil filter changed;
it is located under the transmission pan
The oil is what makes the transmission shift
When you shut off the engine it stops the transmission pump then when you start up again the transmission shifts until the filter clogs again

Posted on May 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Everything works on my stereo system,but there is no sound


Car Stereo Head Unit Install ** No Sound ** Amp Not ...

? 10:41
https://www.youtube.com/watch?v=wQ9bSdJGMjg
Mar 23, 2014 - Uploaded by PSYCHOTICNORMAN
Video for those who installed their head unit correctly, but got no sound / factory amplifiers not turning on. ... Car Stereo Head Unit Install ** No Sound ** Amp Not Turning On ** work around. ....Did everything to the letter on a 2001 Chrysler Town and Country and while I do have audio, my audio is cutting in ...

Everything works on my stereo system,but there is no sound ...

www.fixya.com/.../t26059653-everything_works_stereo_system_but_no
1 hour ago - everything works on my stereo system,but there is no sound lxi 4cd canger - Chrysler 2001 Concorde question.

Chrysler Concorde radio works but no sound Questions ...

www.fixya.com > ... > Cars & Trucks > Chrysler
Chrysler Concorde cars & trucks radio works but no sound questions and answers. ... Fixya - Solutions for Everything ... My 2002 concord lxi when ... CAR STEREO HAS POWER BUT WILL NOT OPPERRATE ... Question about 2001 Concorde ... ...sound from radio thru speakers Is there any popping when playing a CD or ...

Jan 19, 2016 | 2001 Chrysler Concorde

1 Answer

1994 chrysler concorde cuts off fuel and spark while driving


It's very possible you have a bad ignition switch. My '96 LXi had the same problem, plus it tended to randomly drop into "Limp Mode" at any speed.

After replacing the ignition switch (3 years ago) neither of those problems has resurfaced.

Jul 05, 2014 | 1994 Chrysler Concorde

1 Answer

2002 Tranny Problems for 2.7 Concorde


There is common problem with transmission contorl speed sensor. It is cheap to replace around $49.00 and you can do it yourself.

Dec 31, 2009 | 2001 Chrysler Concorde

1 Answer

Refrigerant for 94 chrysler concorde????


R143a is what you use, there should be a sticker in the engine compartment for the specs to the amount of R134a used in the A/C system to your car. Good luck and don't over charge the system. Keep me posted be glad to help. 

Jul 03, 2009 | 1994 Chrysler Concorde

1 Answer

Lighter won't work/Wiper fluid sensor-94 Chrysler Concorde


u can check the fuse if the fuse is good replace the lighter assembly first check fuse and connection make sure u have 24v there

Jun 20, 2009 | 1994 Chrysler Concorde

1 Answer

Shut down


This happened to me on my 94 concord. I had to replace the ign. switch.

Dec 18, 2008 | 1994 Chrysler Concorde

3 Answers

97 concorde with 3.5 engine @ 40 to 45 mph it starts bucking .


Computer firmware needs upgrade

Take your car to a Chrysler dealer shop and have them update the transmission program.As your tranny wears it loses it shift point and stutters between 40 - 45 mph looking for the right gear to change to..Had same problem in 94 Concorde and 94 T&C minivan.Reprogramming tranny fixed both cars.

Nov 22, 2008 | 1997 Chrysler Concorde

1 Answer

1994 Chrysler Concorde - In Limp Mode


I had the same problem with my 94 Concord. After reading the Factory repair manual I took the car to a close friends transmission shop. He up dated some of the parts with Heavy duty parts. Its been fine with 35,000 more miles on it.

Nov 20, 2008 | 1994 Chrysler Concorde

2 Answers

Shift problems in 95 chrysler concorde transmission


Sorry but if your reverse is having trouble you will probably have to replace or rebuild tranny like me. Otherwise try new filter and fluid first.

Nov 09, 2008 | 1995 Chrysler Concorde

1 Answer

94 chrysler concorde


Possible vacuum leak at EGR or PCV, or even at the intake plenum gasket is where I'd check first...accordianman

May 26, 2008 | 1994 Chrysler Concorde

Not finding what you are looking for?
1994 Chrysler Concorde Logo

760 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...