Question about 2001 Kia Spectra

Open Question

Replacing the alternator belt on 2001 kia spectra

The alternator belt is off of my daughters car but in order to replace it i need to remove the power steering belt but cant figure out where the bolts are that need to be loosened to get it off our kia spectra makes a terrible squeeling noise every time we start it up but only if the air conditioner is on. We have had to replace our alternator belt twice already, and now we have to replace it again. is there any relation? how do we fix this awful noise and this aggrivation?

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1214 Answers

SOURCE: replacing the alternator belt on 2001 kia spectra

Then you don't take anything off. There will be a spring loaded idler that tensions the serpentine belt. Take a socket or long 12 point wrench and attach to the center bolt of the tensioner, then rotate the idler wheel away from the belt, take the belt off. Slowly release the spring tension of the idler.
The 2nd belt should be set up the same way.

Posted on Jan 23, 2009

kirkx
  • 2019 Answers

SOURCE: my kia spectra was making a loud squeeling noise

Look at the AC pump. See if the belt is there, slipping, or the pully clutch engaging.
The center of the AC pully can be standing still while the outside turns. There is supposed to be a magnet that grabs the outside and locks it to the inside when you turn the AC on. The magnet could be bad or its clutch slipping.

Posted on Mar 04, 2010

jturcotte
  • 7780 Answers

SOURCE: replacing a alternator belt on

Please let me know if you have questions, and thanks for using FixYa.

1.8L Engine
A/C Compressor-Power Steering Pump Belt


NOTE Refer to the accompanying illustration for bolt and nut locations.

  1. Loosen bolt A , nut B and nut C
  2. Loosen tension adjusting bolt D
  3. Remove the drive belt

To install:

Route the belt over the pulleys.
jturcotte_1369.gif

Fig. Removing the A/C and P/S pump belt-1.8L engine


  1. Tighten bolt A and nuts B and C, as follows:
    1. Bolt A: 27-39 ft. lbs. (37-53 Nm)
    2. Nut B: 14-19 ft. lbs. (19-25 Nm)
    3. Nut C: 24-34 ft. lbs. (32-46 Nm)

  2. Check the belt tension and adjust as necessary.

Alternator Belt
  1. Remove the A/C and power steering pump belt, if equipped.
  2. Loosen the alternator mounting bolt and adjusting bolt.
  3. Remove the alternator belt.
jturcotte_1370.gif

Fig. Alternator belt-1.8L engine



To install:

  1. Install the alternator belt and adjust, as outlined earlier.
  2. Tighten the bolts, as follows:
    1. Mounting bolt: 27-38 ft. lbs. (37-52 Nm)
    2. Adjusting bolt: 14-18 ft. lbs. (19-26 Nm)

  3. Install the A/C and power steering pump belt, if equipped.
  4. Check the belt tension and adjust as necessary.

Posted on Mar 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Belt diagram for alternator belt 03 kia


your Kia dealership can print you a diagram.

Feb 20, 2014 | 2003 Kia Spectra

2 Answers

Replacing a alternator belt on a 2002 kia spectra.... another belt in the way cant find what loosens the belt


Please let me know if you have questions, and thanks for using FixYa.

1.8L Engine
A/C Compressor-Power Steering Pump Belt


NOTE Refer to the accompanying illustration for bolt and nut locations.

  1. Loosen bolt A , nut B and nut C
  2. Loosen tension adjusting bolt D
  3. Remove the drive belt

To install:

Route the belt over the pulleys.
jturcotte_1369.gif

Fig. Removing the A/C and P/S pump belt-1.8L engine


  1. Tighten bolt A and nuts B and C, as follows:
    1. Bolt A: 27-39 ft. lbs. (37-53 Nm)
    2. Nut B: 14-19 ft. lbs. (19-25 Nm)
    3. Nut C: 24-34 ft. lbs. (32-46 Nm)

  2. Check the belt tension and adjust as necessary.

Alternator Belt
  1. Remove the A/C and power steering pump belt, if equipped.
  2. Loosen the alternator mounting bolt and adjusting bolt.
  3. Remove the alternator belt.
jturcotte_1370.gif

Fig. Alternator belt-1.8L engine



To install:

  1. Install the alternator belt and adjust, as outlined earlier.
  2. Tighten the bolts, as follows:
    1. Mounting bolt: 27-38 ft. lbs. (37-52 Nm)
    2. Adjusting bolt: 14-18 ft. lbs. (19-26 Nm)

  3. Install the A/C and power steering pump belt, if equipped.
  4. Check the belt tension and adjust as necessary.

Mar 30, 2011 | 2001 Kia Spectra

1 Answer

How do i change alternator belt 2003 kia spectra


Welcome to FIxYa.com

Replacement


1. Remove AC and P'S drive belt, it equipped.

2. Loosen generator mounting bolt and adjusting bolt.

3. Remove generator belt.

4. Install new generator belt and adjust to specification.

5. Tighten all bolts to specified torque.

Tightening torque mounting bolt: 27-38 Lb-ft (37- 52 N.m. 3.8 -5.3 kg-m)

Adjusting bolt: 14 - 18 Lb-ft (19 -26 N.m. 1.9 -2.6 kg-m)

Image

6. Install AC and P'S drive belt, if equipped. and adjust to specification.

leedavidian_154.jpg

Thank you for using FixYa.com

Regards, Lee Davidian

Dec 20, 2010 | 2003 Kia Spectra

1 Answer

I had my alternator replaced in my 2001 Kia Spectra. The belts really made noise after and for the second time the alternator belt has broken off. What is wrong?


whan a new belt is put on it will always stretch a littl;e after a few days and will need to be tightened,if its making noise....it most likely loose,so after the belt is replaced..drive it for a day or two then have it retightened,hope this helps

Nov 11, 2010 | 2001 Kia Spectra

1 Answer

Hesitation while accelerating


air leak at air duct to throttle body.

Jun 12, 2009 | 2001 Kia Spectra

3 Answers

KIA SPECTRA 2003 ABS, BATTERY, BRAKE LIGHT IS ON ALTOGETHER WHILE ENGINE IS RUNNING. I DON'T KNOW WHY.


2006 kia spectra...brake and battery light came on car was still running, it never cut off....what do you think that could be?

May 06, 2009 | 2003 Kia Spectra

3 Answers

03 kia spectra new alt and belt random squealing now no heat


right size belt ? cheap belt ? have battery tested

Feb 19, 2009 | 2003 Kia Spectra

2 Answers

Replacing the alternator belt on 2001 kia spectra


Then you don't take anything off. There will be a spring loaded idler that tensions the serpentine belt. Take a socket or long 12 point wrench and attach to the center bolt of the tensioner, then rotate the idler wheel away from the belt, take the belt off. Slowly release the spring tension of the idler.
The 2nd belt should be set up the same way.

Jan 23, 2009 | 2001 Kia Spectra

1 Answer

Squealing


Let me know what you figure. I have changed alternator , water pump and belt on my daughters 2002 Spectra. . Still squeals. Currently assessing battery condition.

Aug 12, 2008 | 2001 Kia Spectra

Not finding what you are looking for?
2001 Kia Spectra Logo

Related Topics:

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...