Question about 2000 Hyundai Sonata

1 Answer

Brake light still don't work after changing switch assy-stop lamp

And cruise control for a sonata 2000 2.4 can someone help thanks in advance.

Posted by on

  • Samuel Charles Spriggs May 11, 2010

    If it's not the brake light switch it could be the turn signal assembly in the steering wheel -- the brake light circuit goes thru that assembly to turn off the brake light when the turn signal is activated.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Not enough information in your description of the problem. You start with "brake light still don't work after.... "??? after WHAT? Then you write .. 'and cruise control for a sonata 2000 2.4... etc." I'll take WILD GUESS... you have a brake lamp switch which is broken/malfunctioning. Please remember to RATE my response.

Posted on May 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake lights dont turn on toyota rav 4, whats the problem?


Check the switch on the break peddle , thay can work loose or renewal good luck colin

Jul 05, 2017 | Toyota Cars & Trucks

2 Answers

2005 Silverado brake lights on tail not working, cruise out , bulbs and fuses ok


Brake light switch? The cruise and brake lights problems are likely related. The cruise control cuts out when you press on the brakes. I had a van where the cruse wouldn't engage. Then someone pointed out my brake lights were always on. It was the switch.

Dec 03, 2016 | Cars & Trucks

1 Answer

206 SONATA CUSE CONTOL DOESNT WORK


You could possibly have a "brake lamp switch" faulty in your vehicle. There is a recall on these for certain model vehicles. Your vehicle may think your brakes are on, which isn't allowing the cruise control to activate.
Also the new Hyundai's are manufactured that if the Engine light is on, your cruise control won't work.
But I would try the Stop Lamp Switch first.

Hope this helps.

Oct 10, 2014 | 2006 Hyundai Sonata

1 Answer

Sorry, that should have been esc light on 2010 Hyundai Elantra


The brake light recall you got in the mail should fix the ESC light.

HYUNDAI IS RECALLING 532,633 MY 2006-2007 ACCENT, ENTOURAGE, SONATA, MY 2007 AZERA, ELANTRA AND SANTA FE, MY 2005-2007 TUCSON AND MY 2007-2008 VERACRUZ VEHICLES. THE STOP LAMP SWITCH IN THE AFFECTED VEHICLES MAY MALFUNCTION. A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO NOT ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED. A STOP LAMP SWITCH MALFUNCTION MAY ALSO AFFECT THE OPERATION OF THE BRAKE-TRANSMISSION SHIFT INTERLOCK FEATURE SO THE TRANSMISSION SHIFTER WOULD NOT BE ABLE TO BE SHIFTED OUT OF THE PARK POSITION. IT MAY ALSO CAUSE THE ELECTRONIC STABILITY CONTROL (ESC) MALFUNCTION LIGHT TO ILLUMINATE, AND IT MAY NOT DEACTIVATE THE CRUISE CONTROL WHEN THE BRAKE PEDAL IS DEPRESSED.

The stop lamp switch is used to judge if the acceleration system is abnormal. The stop lamp switch contains two switches monitored by the PCM. This is all covered at the dealer.

The stop lamp switch contains two switches monitored by the PCM. This will cause the issue you are having. It will illuminate the engine light also and cause the transmission to go into limp mode which is what's happening. Have replaced many for this same exact issue. This is what needs to be done next. The engine and ESC light come on together.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Nov 14, 2011 | Cars & Trucks

1 Answer

2002 Hyundai Elantra GLS: Cruise control stopped responding. Brake lights are working. What do I do to fix the problem?


It could be something a simple as the cruise control switch(s)... or it could be the Cruise Control Module located in the engine compartment. There's also a 'clock spring' in the circuit between the steering wheel & the cruise module. Note: there are two sets of contacts in the brake lamp switch, one set for the brake lights, the other for cruise control. Properly diagnose the 'CAUSE' of the problem. Otherwise you could end up buying parts you don't need. Proper diagnosis is a 'hands-on' activity, which is nearly impossible to achieve here under the FixYa website

ghost45_39.jpg
ghost45_40.jpg
ghost45_41.jpgghost45_42.jpg

Aug 31, 2011 | Hyundai Elantra Cars & Trucks

2 Answers

My cruise control is not working, no lights come on and I've checked all fuses with a meter and all check good, I can't put it in gear without pushing brake so shift interlock is good, all connections...


If the CHML ( Center High Mount Stop Lamp ) is working correctly, the next thing to check is the Cruise Control Deactivation switch on the brake pedal.
6d7cc37.jpg

This is different than the Brake Pedal Position ( BPP ) Switch which is for the stop lamps, and the shift interlock.

The Cruise Control deactivation switch, and the on / set switch are the only external inputs to the Cruise Control, the PCM uses the VSS ( Vehicle Speed Sensor ) to read, set and adjust the speed ( no more vacuum items on the 04+ MY trucks )

Aug 13, 2010 | 2006 Ford F-150

2 Answers

I own a 2005 GMC Canyon Five CYL and the cruise control stopped working last niight. You push the button and no cruise. I checked the fuse and it is ok I exchanged with another 10AMP and no change still...


Start with the simple and check the fuses and the Stop lamp switch. Check your brake lights, if they're not working, the cruise won't work either. If they're not working, check the fuse for them, if the fuse is fine, then take it into the dealer, there's been a recall issued on the brake switch, so it should get fixed for free.
Cruise Control Disengaged
The powertrain control module (PCM) disengages the cruise control operation based on the signals from the following switches:

* The stop lamp switch
* The TCC brake/cruise release switch
* The clutch release switch, if equipped
* The cruise control On/Off switch

The TCC brake/cruise release switch and the stop lamp switch are mounted on the brake pedal bracket. When the brake pedal is applied, the normally closed TCC brake/cruise release switch opens and the normally open stop lamp switch closes. The PCM detects a low signal voltage on the TCC brake/cruise release switch signal circuit and a high signal voltage on the stop lamp switch signal circuit. When the clutch pedal is applied, the normally closed clutch release switch opens and the PCM detects zero voltage on the CCP switch signal circuit. The vehicle speed stored in the memory of the PCM will be erased when the cruise control On/Off button is turned OFF, or the ignition switch is turned OFF.

The Cruise Control System will disengage when the PCM detects that a driver override function has been active for approximately 60 seconds .

When the Cruise Control System is disengaged, the PCM sends a class 2 message to the instrument panel cluster (IPC) in order to deactivate the cruise control indicator.

Cruise Control Inhibited
The powertrain control module (PCM) inhibits the cruise control operation when any of the following conditions exist:

* A cruise control related DTC has been set.
* The vehicle speed is less than 40.2 km/h (25 mph) .
* The vehicle is in PARK, REVERSE, NEUTRAL, or 1st gear.
* The engine RPM is too low.
* The engine RPM is too high, with fuel cut off.
* The vehicle speed is too high, with fuel cut off.
* The system voltage is not between 9 volts and 16 volts .
* The Traction Control System (TCS) is active for more than 2 seconds .

Thank you for using Fixya and start with replacing the stop lamp switch. Even though the brake light work, it;s been known for that switch to cause your issue. that's way there was a recall for it.

Apr 01, 2010 | 2005 GMC Canyon

1 Answer

Cruise control stop working can someone tell me how to fix myself


If all the brake lights are out it is likely your stop lamp switch is bad, it controls lights and cruse, and also supplies input to ecm/tcm. The old ones would just pop apart, you can put them back together but to replace the switch it is only 20-30 bucks. Try that.

May 26, 2009 | 2000 Hyundai Sonata

1 Answer

Rear brake lamps


I worked for a GM dealership,The problem maybe in the turn signal switch. The brake lamp circuit is wired into it to turn off cruise control.The third brake lamp is a circuit by itself.

Oct 02, 2008 | 1994 Buick Skylark

8 Answers

2006 Hyundai Sonata brake light problem


there is a tsb for the brake switch in 06 sonatas. it must be adjusted or replaced by dealership. is your check engine light on, if so its probably code p0504

Jun 20, 2008 | 2006 Hyundai Sonata

Not finding what you are looking for?
2000 Hyundai Sonata Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...