- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remove the screw from the black tab on top of the headlamp assembly. Around the headlamp plug, there are 3 nuts, remove them carefully, as they are easily dropped and lost, remove the ring that secures the bulb to the assembly, it only turns a portion of a turn. Slide the entire headlight assembly partially out the front, then disconnect the rubber plug that contains the marker/turn signal bulbs. Re assemble in reverse order, making sure the headlight bulb is properly aligned or the ring will not tighten. Also,take care not to touch the headlight bulb glass, as the oil from your fingers may cause the bulb to break when it heats up. Hope this helps.
Take out the two 10 mm bolts on the top tabs. Take out the two 10 mm bolts that go through the radiator support to the lower rear of the headlight. slide the headlight out. unplug the bulb, untwist the lock ring on the bulb. wiggle the bulb out.
No. If you look at the top of the light, there are 3-10mm bolts I believe. Remove them and slide the entire headlight out to gain access to the bulb. I hope I've helped. If so please rate my assistance and leave a comment to help others with the same problem.
1) open the hood. 2) Carefully remove the three screws holding the
headlight assembly in place. 3) Carefully slide the
headlight assembly out. At this point you can replace the headlight
bulb, turn signal bulb, or the entire headlight assembly. To replace
the headlight bulb turn the collar holding the bulb in counter
clockwise. Pull the bulb out of the headlight assembly. Replace the
bulb. Insert the bulb into the headlight assembly insert the collar and
turn clockwise until it locks. (Do not touchglass with your fingers or it will cause the bulbs to catastrophically fail - clean with alcohol pad if you touch the glass) 4) Carefully insert the headlight
assembly back into place. 5) Replace the three screws removed in step 2
being careful not to over tighten.
Open hood. Remove 3 bolt holding headlight housing. When housing is out, remove the retaining ring by twisting counterclockwise. Pull out bulb, replace. When installing the retaing ring make sure all 3 tabs go in there slots & under the ring
Unscrew the three screws that secure the headlight assembly to
your Dodge Caravan. Put the screws in your pocket or another safe
place, so you won't lose them before reinstalling the headlight
the headlight assembly away from the front of the vehicle. Turn the
bulb retaining ring counterclockwise to unlock the electrical
connector. Remove the electrical connector from the bulb assembly by
pulling it straight out.
the old bulb with a new halogen headlight bulb. Connect the
electrical connector and turn the bulb retaining ring clockwise to lock
the bulb into place.
the headlight assembly and secure the screws tightly before closing the
hood. Turn on your Dodge Caravan, flip on the headlights and verify
they're working properly.