Question about 1996 Dodge Neon

1 Answer

Front turning light does not work, i replaced the bulb, and when i turn the truning signal does not turn off.

Have a 2001 corvette no modifications. The left turn signal blinks twice as fast as normal in the back and normal up front. Replace all bulbs and flasher/hazard switch and still have the problem. Only other clue I have is the front trun signal stops flashing when I turn on the parking lights and the back lights still flash fast. Any help would be appreciated. When i turn the turning signal does not turn off, and the right front turning light does not work, i replaced the bulb.

Posted by on

  • yadayada
    yadayada May 11, 2010

    do u have 12 volts to the bulb socket, if so u may just have a bad socket or a bad ground connection.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 155 Answers

Sounds like you have a bad ground. Follow the wiring harnesses under the hood and in the trunk, there should be a ground wire going to the chassis or to the body. If they are all clean and tight, you might be looking at a bad light socket.

Posted on May 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My right front turn signal on my 2001 ford ranger doesnt work and my inside right turn signal light on dash doesnt work and flashes really fast. Buld on right side was replaced and works when lights


was the correct bulb used? this sounds like a single function bulb was used NOT the bulb that will light with the headlights and ALso produce turn singles

Dec 06, 2014 | 2001 Ford Ranger Regular Cab

1 Answer

This is on a 2001 Chevy Corvette with 70,000 gentle miles. One or the other of the front daytime running lights (turn signals) keep burning out. The recepticle (connection plugs) looks burned, and the...


this is just a stab in the dark, try cleaning the battery to engine ground and the engine to body(frame) ground, i have a strande geeling that during startup you are getting a voltage spike through the lights

Nov 10, 2010 | 2001 Chevrolet Corvette

1 Answer

How to change the front turn signal on a 2001 corvette


For the 2001 Corvette it's simple for replacing it. Using a Sylvania yellow bulb, part# 3157NA LL or 4157NA LL

Reach inside the air intake opening just below the turn signal and push the black friction-fit hose back and down so it is out of your way. With the fingers of one hand, you can press the top of the black plastic duct (air intake) down to make room for your other hand to squeeze into the opening. Reach inside the hole and locate the wiring harness and lamp socket for the turn signal. The harness is on the bottom of the lamp assembly, so that the bulb is essentially sticking upwards into the reflector housing. Turn 1/4 turn and pull wiring harness out of the opening. Change the bulb and reverse the process. Takes about 4 minutes.

Aug 26, 2010 | 2001 Chevrolet Corvette

1 Answer

I have no rear stop lights, turn signals or hazards. Parking or tail lights work, as do front turn signals and hazards. Bulbs & fuses are good. ????


Check your wire harness in the trunk. May have to be replaced. May just be a bad connection. Hope its the latter

Apr 30, 2010 | 1980 Chevrolet Corvette

1 Answer

Turn signals come on but do not blink.


ARE THE FRONT AND REAR TURN SIGNAL INDICATOR BULBS ON STEADY AS WELL?

Sep 29, 2009 | 1972 Chevrolet Corvette

1 Answer

Changing front directioal signal bulb on 2000 corvette need free how to


Turn your ignition on and your headlights. Turn the key off and then the headlights. They should stay open. Open the hood. Remove the rubber 'bump stop' located next to the headlamp on the side that has the bad bulb. Be careful to not change the location of the lock nut.
Now you have a big opening that will allow you to reach down to the rear of the directional signal and remove the socket and bulb by turning counter clockwise. Replace the bulb. I like to put some dielectric compound or at least some vaseline on the base wires of the new bulb.
Test. Reverse procedure for reassembly. Congratulations....... you just saved $70.00!!! Dave

Jul 01, 2009 | 2001 Chevrolet Corvette

3 Answers

Left turn signal blinks fast in rear and regular in front


Very simple the bulb is out. When the blinker does that its telling you the bulb needs to be replaced

May 17, 2009 | 2001 Chevrolet Corvette

2 Answers

Replace turn signal bulbs on 2001 corvette


Rears are simply remove the two screws on the lens and remove the tail light from the Vette, twist the connector to get to the bulb. Reverse instructions to install. For the fronts jack up the front, remove the small closeout panel under each side, push the brake cooling duct to one side and twist the bulb socket out of the light to get to the bulb. Reverse instructions to install.
sebring1962@yahoo.com

Feb 22, 2009 | 2001 Chevrolet Corvette

Not finding what you are looking for?
1996 Dodge Neon Logo

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...