Question about 2000 Daewoo Nubira

1 Answer

Run over a cavity "deep excavation" with high speed

Dear sirs i have run over a cavity with a speed of 100 km with my nubira 2000 car consequently the follwing consequences appeared: -

1- vibration during speed shift.

2- loosen Suspension system and noise

what could be happened?

regards,

Posted by on

  • yadayada
    yadayada May 11, 2010

    u ae really in a pickle now, for god's sake man crawl under and look at the damage.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Daewoo Master
  • 22,156 Answers

This needs a motor vehicle technician to lift vehicle and inspect the damage ,but it will not be cheap because i should imagine that the lower track control arm is damaged ,and the tyre is now running out of alignment which is caused by the above

Posted on Aug 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ABS caution light came on when reach 100 km/h


Sensors in your wheels might need cleaning. They're magnets and rust can cover them sometimes.

Dec 11, 2014 | 2000 Hyundai Accent

Tip

PRADO 99 GX 4 CYLINDER 4WD


HI,
My prado 1999 4V 2.7CC 4WD M/T,
my car is vibrating on high way after 100 km speed, please help me for sending solution of fault. upto 100 km speed its runs smooth but after 100 km it start vibrating all body and interior.

other problem is for tires the one i purchase this car he replaced the four tires of the car by size 205, 70,16R actual size is 215,70,16R or 265,70 R16.please advise it is ok no problem to drive on present tires,

on Mar 24, 2010 | Toyota Land Cruiser Cars & Trucks

1 Answer

How to fix high aidla speed on Daewoo nubira 1998?


High idle speed on any fuel injected car engine ussually means an intake air leak or faulty idle speed motor, but maybe faulty coolant temp switch, check if coolant level in radiator is to top of neck ONLY OPEN RADITOR WHEN ENGINE IS COLD, this is for personal safety. Get a trigger spray bottle of water and spray around all parts of the inlet manifold if leak evident rgine should run slightly rough. other poss prob could be brake booster faulty or booster one way faulty or hose split. Good luck.

Nov 20, 2014 | 1999 Daewoo Nubira

1 Answer

Transmission


seam slightly high,
i would say around 2500-2800

Apr 16, 2010 | 1997 Pontiac Sunfire

1 Answer

My nubira 2000 incident


You need to bring this to a body shop. They can give you the best advise. You have damage we can't see. Everything you get from us is just a guess and i'm sure your allready doing that.

Jul 14, 2009 | 2000 Daewoo Nubira

1 Answer

Nubira 2000 user manual pdf manual (english)


try this link to manual even though its 2004 manual is basically same just they updated info and put all paper based books into electronic form.(this link works !!)

http://www.onlinefreeebooks.net/automotive-machinery-power-equipment-ebooks/daewoo/daewoo-nubira-lacetti-service-manual-my2004-transaxle-drive-axle-pdf.html

Jun 06, 2009 | 2000 Daewoo Nubira

1 Answer

I have Nubira 2000, I changed the brake pads but even though no use the brake effeciency is very less.


after fitting new brake pads you must "bed them in"
by doing a few high speed brake applications of medium to hard brake applications
say 80 km/h hit the brakes down to 40km/h giving a pause in between to let brakes cool down again
if pedal feels spongy or you have to pump pedal up to get a high brake pedal you might have air in brake lines
you should allways bleed brakes after replacement incase of air ingress into system

Jun 04, 2009 | 2000 Daewoo Nubira

1 Answer

RPM problems


It is the new variable cylinder management the same thing happened on my 2003

Apr 07, 2009 | 2004 Dodge Ram 3500 Truck

Not finding what you are looking for?
2000 Daewoo Nubira Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...