Question about 2004 Kia Sedona

1 Answer

2004 Kia Sedona shakes/vibrates when turning a corner and accelerating from 0-40. Repair shop replaced front left tire because stell belt showing. Stopped for day after repair then started again tod

My 2004 Kia Sedona shakes/vibrates when turning a corner and accelerating from 0 - 40. Repair shop replaced front left tire because steel belt showing. Stopped for day after repair then started again today.

Posted by on

  • yadayada
    yadayada May 11, 2010

    U neded to get this in for inspection before something breaks and u get in an accident.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

One check if your wheels are tight 95 ftlbs if mag wheels remove make sure no heavy corrosin arond hub and rim wheel will not seat properly and come loose. 2 check front end if belts are showing check ball joints and tie rides for wear vans are also known
for bad wheel bearings even if you cant hear it at 80km50mph give or take it may have ecssive play
check that front end .otherchecks ps pump and or loose p/s belt

Posted on Dec 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 kia sedona xl has a vibration in the front suspension driver side. Tires have been balanced and rotated, brakes and rotors are brand new. Vibration has not gone away. We need more suggestions.


Check for a bent rim. Rotate the left and right tires and see if the vibration moves to the passenger side.If not, you may need a front end alignment.

Jan 03, 2015 | Kia Cars & Trucks

1 Answer

Bad vibration on right front tire even after new tires


Does it feel like its coming from the front or a certain side in the front and can you feel it in the steering wheel or brake pedal.Is it only at certain speeds accelerating,braking,decelerating or is it constant.

Jul 16, 2012 | 2003 Kia Sedona

1 Answer

Stering wheel shakes at 30 to 40 miles an hour


Put your spare tire on one side of the front. Drive it, if it does not help, replace the spare and then try removing the other front tire. Drive it and see if it helped.

The tire that caused the vibration probably threw a weight or has a broken belt. Have that tire checked and repaired, then have the Tire shop put the spare back in the trunk.

If it is not a tire problem check your tierod ends. They connect both front wheels and if there is a lot of play, you can get shake and wobble from the slack in the frontend.

Sometimes front Rotors can cause a shake when you hit the brakes. If the car shakes without pressing the brakes, then its the tires or frontend.

Feb 07, 2011 | 2004 Ford Crown Victoria

2 Answers

I NEED A FIRING ORDER DIAGRAM FOR A 3.5 KIA SEDONA I HAVE TROUBLE CODES 302 AND 306 AFTER COILS,PLUGS AND WIRES WERE REPLACED


Firing order 1.2.3.4.5.6
Looking at engine , number 1 cyl left front,number 2 left middle,3 left back
Number 4 right front,5 middle right ,6 back right
Fault codes indicate missfire cylinder 2 and 6

Jul 27, 2010 | 2004 Kia Sedona

2 Answers

I have a vibration in the front end of my 04 Kia Sedona. It is present with initial acceleration but seems to level out/disappear around 55+ mph. I've had it checked out and the engine mounts, new tires...


call the local dealer talk to a mechanic not the service person
a kia mechanic will know what the problem is usualy r can direct you in the right direction

Mar 23, 2010 | 2004 Kia Sedona

2 Answers

2004 Kia Sedona, replacing the timing belt? How?


how do you get a picture of the timing belt on a Kia Sedona

Aug 18, 2009 | 2004 Kia Sedona

1 Answer

Winding noise and vibration when driving on front right tire


you could have more than one problem the vibration accelrating maybe an inner cv joint ,if you just had the tires replace and an aligment done they should have checked the front end for worn out ball joint and tierods but the wheel bearing may not have any movment but can still make noise

Jul 13, 2009 | 2003 Kia Sedona

1 Answer

Same Problem here... Kia sedona 2002


Several items can contribute to the shaking of the front end. Bad tires, any slack in the hubs, a bad CV joint, worn tie rods, ball joints. I would first check out the tires and then proceed to searching for components that have worn and have slack in them. Replace as necessary.

Jul 13, 2009 | 2004 Kia Sedona

1 Answer

Noise from car


I had one do that and found that the ac belt was the cause. try replacing the belts if you have not.

May 05, 2009 | 2004 Kia Sedona

2 Answers

Front end shaking


I had the same problem on a 2003 Kia Sedona where the front end would vibrate excessively while accerating at freeway speeds. Over time it got worse and was noticable at lower and lower speeds and while just maintaining speed, but went away when I took my foot off the gas.

It turned out to be the inner CV joint on the passenger side. You can check for this by grabbing the inner and outer half axels with large vice grips or slip-joint pilers and turning them in opposite directions while listening for crunching or "loose parts" noises.

The CV is sold with the axle so I just bought the outer half axle for $80 (which has the inner and outer CV joints attached) and replaced it. If you do it yourself, make sure you have a ball spline fork, a hub puller tool, and a big torque wrench for putting the bearing assembly back on. You can rent these at AutoZone.

The bad CV joint also caused the bearing to go bad. It had burn marks and made a grinding noise while turning. It was very hard to get out, so I had to take the assembly to a machine shop to have it taken out and the new one put in. $35 for bearing and $30 for machine shop work.

After repair, I took an 800 mile road trip that weekend with no problems other than barely noticable vibration from the driver side at 70+ mph. I figure vibration was so bad pre-repair that it messed up something on the other side as well, so I'll check out the driver side bearing and CV when I get a chance.

Apr 07, 2009 | 2004 Kia Spectra

Not finding what you are looking for?
2004 Kia Sedona Logo

846 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...