Question about 1999 Honda Civic

1 Answer

How to remove a 1999 civic se left door panel

I need to remove the door panel on a 1999 civic se driver side door panel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the drivers side window on a 1999 saturn s series car (manual)


Remove inner door panel and remove the glass that is left in the window track. Apply glue and place new glass in track and give it plenty of time to dry and set. Then replace inner door panel after all is fine.

Sep 29, 2016 | Saturn Cars & Trucks

1 Answer

Dont no how to remove left side drive door panel 1999 buick regal


there are screws you have to remove. make sure you've found and removed all of them. then the door is held in with clips from the back side. work a pry bar or a long flat screw driver around the edges to pop them loose then you should be able to get your hands behind it to find the other clips. in some cases the handles have to come off before the panel can be removed

Jul 15, 2012 | 1999 Buick Regal

1 Answer

The door lock on the driver's door of my 1999 Honda Civic LX won't work. The other door locks work. Previous theft damage has pushed the key lock into the door. How do I get the door panel off and...


You probably have a broken plastic clip that holds the lock button actuator rod on. Your previous lock damage could have cause this also since the key lock and the button/lever lock are both connected to in internal door lock. Most auto parts stores will have a replacement clip.
Getting to the part is not that easy. The door panel needs to be removed. The hardest part is getting all the hidden door panel clips released. After you find and remove all the panel screws, use a small putty knife to pop off the bottom, then the sides of the panel. The panel hooks on over the top edge at the window, so just lift it more or less straight up. You will need to unplug the wires from the door panel. Under the panel the door is covered by a plastic sheet, carefully peel this away from the door. If you tear the sheet just just duct tape to repair it. Look inside door either at lock, where door lathes or at the button/ lever. There is a steel rod that hooks into a small hole that has fallen form the hole. Here is a link to a photo of one that is similar (not exact). http://www.flickr.com/photos/jeepin/281608298/ Hope this helps.
Please rate his answer.

Feb 09, 2011 | 1999 Honda Civic

1 Answer

Cann't get door panal off of drivers side door on 1999 ford Expedition


Remove the screw covers from the arm rest and remove the screws. Use a one inch stiff putty knife and slide between the door and the door panel. Move it right or left until you hit the retaining clip. Gently pry the door panel upward until the clip releases. Repeat this all the way around the bottom & both sides. When all are released push the door panel upward releasing in from the edge of the window opening.

Feb 10, 2010 | 1999 Ford Expedition

2 Answers

How do you remove driver side door panel 1999 vw beetle


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.

Oct 13, 2009 | 1999 Volkswagen Beetle

3 Answers

Driver side lock


the solenoid may be weak, or it can be lubed. you will need to remove the door panel and see how it works, and try to lube it, or see if there is any binding.

Oct 12, 2009 | 1999 Honda Civic

1 Answer

Remove door handle


you need to take the panel off on the inside and reach up to the handle....you will find what holds it on on each side of the handle...i do not know exact metric size but loosen the two nuts and unhook latch rod and it can be removed

Mar 18, 2009 | 1999 Honda Civic

1 Answer

Change window gear on 99 civic


this is from a 97 civic should be the same. remove the door panel. remove 1 screw and pull handle, remove 1 screw and plastic cover over door opener handle. remove speaker cover and three screws underneath. remover window crank. then remove the door panel (held on with plastic plugs...just pull panel toward youself).
8e9dc4a.jpg
e838839.jpg
to remove the regulator ("window crank gears") Remove the glass held in with two 10mm bolts. The regulator itself is held in with six 10mm bolts. Remove these bolts and remove the regulator. (installation is reverse). Note: pay attention to the Idler arm track (highlighted in green) I think this one is directional (the front has to be at the front and the back has to be at the rear)

5a5e384.jpg

Feb 23, 2009 | 1999 Honda Civic

1 Answer

Removing inside door panel from drivers side of 1999 honda civic


two philips screw on the handle ( the one u use to shut the door), one on the far right handside in the middle, one in the other handle ( the one u use to open the door with), after u removed all the screws, put a flat screwdriver at the bottom of the panel and pull it off.

Jan 17, 2009 | 1999 Honda Civic

1 Answer

Gears are stripped on drivers door window crank 1999 honda civic


First you are going to have to purchase another window regulator. Then you will have to remove the door panel and all material until you can access the window regulator.

At this point I can't go further until I know if it has manuel windows or power windows, because each is an entirely different operation.
Bill

Nov 19, 2008 | 1999 Honda Civic

Not finding what you are looking for?
1999 Honda Civic Logo

Related Topics:

1,169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...