Here are the photos:
http://www.ptcruiser.fi/ptgalleria/albums/userpics/10010/lampunvaihto%201.jpg
http://www.ptcruiser.fi/ptgalleria/albums/userpics/10010/lampunvaihto%202.jpg
When I replace those high beams to xenon lights, I opened a bit front fender splash shield and bend shield so that I had access to head beam.
You should be able to access the bulb from the inside of the engine compartment.... there are a few different methods that are used to hold the bulb in. if you cannot figure it out let me know i'll do more research on it. one important rule... never touch the headlight bulb with your fingers that will shorten it's lifespan.
and if the headlight you wish to replace is on the same side as the battery... you will have to remove it first... if the radio is of the anti-theft variety that requires a code... make sure you know it and how to enter it.
Robert
Hopefully this solves your problem... so please take a moment to rate this solution thanks and if it doesn't just add a note here i will assist you further.
199 views
Usually answered in minutes!
×