Question about 2003 Dodge Durango

1 Answer

Brake lights not working

2001 Grand Am GT, my brake lights are not working, tail light and light on the trunk. I don't beleive all 3 bulbs could burn out, besides at night I do have taillights, as well my signals work. I have tried changing the fuse to no avail, they still do not work, not sure what could be trying to save myself a trip to mechanic?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,489 Answers

Problem is most likely the brake light switch -- located at the top front of the brake pedal -- it could be loose, have bad connections, have burned switch contacts, etc.

When the brake pedal is depressed the switch button comes out closing the switch contacts inside, thus energizing the brake lights.

Posted on May 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 05 silverado all three break lights do not work. When I hook up my boat the break lights on my trailer function just fine. And all bulbs and fuses are good any ideas.


Have you checked the bulbs? Some people don't beleive all the lights can burn out at once but when one brake light is on they are all on and for the same amount of time.
If the bulbs are fine then check the connection where the trailer plug is to the main harness. Some of those connectors go between the main harness and the tail lights and the connector can go bad.

Sep 02, 2011 | 2005 Chevrolet Silverado 1500 2WD

2 Answers

How do u take tail light off to replace brakelight 2001 grand prix


This web site should tell you. http://www.paulstravelpictures.com/How-To-Stop-Headlight-Tail-Light-Condensation-Guide/index.html

Aug 23, 2011 | 2001 Pontiac Grand Prix

1 Answer

My brake lights and rear blinkers are not working, I checked light bulbs (tail lights work) and fuses. what next


typically with gm the brake light and turn signals work on the same filament, so just because the tail lights come on does not mean that the bulb is not burned out. try simply replacing the bulbs.

Feb 21, 2011 | 2001 Chevrolet Cavalier

2 Answers

How do you change a brake light in a 97 accprd?


1. Open the trunk and remove the taillight cover by turning the knob.
2. Determine which of the two bulbs is burned out: tail/stoplight or turn
signal.
3. Remove the socket by turning it one-quarter turn counterclockwise.
4. Remove the burned out bulb from the socket by pulling it straight out of its socket.
5. Install the new bulb in the socket.
6. Reinstall the socket into the light assembly.
7. Test the lights to make sure the new bulb is working.
8. Reinstall the taillight assembly cover.

Nov 14, 2009 | 1997 Honda Accord

3 Answers

2003 jeep grand cherokee brake lights replacement


Remove screws for lens. You may have to access them from inside the hatch. Then pull out lens, then turn and pull out bulb and socket, Push and turn then pull bulb out.

Sep 12, 2009 | 2003 Jeep Grand Cherokee

3 Answers

Tail lights work, but not one brake light when braking at night.


2001 jeep grand cherokee left brake does not work period. I replaced bulb to no avail. the entire tail lamp assembly looked brown as though it heated up. However, the tail light, signal light and back-up lights still work. Please help.
Mike.

Sep 03, 2009 | 2001 Jeep Grand Cherokee

2 Answers

How replace a brake light in 2001 pontiac grand am


open trunk, pull down carpet around break lights you will see 3 or 4 wing nuts remove them pull out complete tail light section

Jun 29, 2009 | 2001 Pontiac Grand Am SE

4 Answers

2001 jeep grand cherokee lights


The problem is with the connection from the light bulb holder to the socket that the bulb and holder go into. I believe on my 01 JGC it was the top light that was going out when i applied the brakes with the lights on. If you remove the light bulb holder in the tail light assembly and look at the area that the bulb and holder came from either the metal that makes contact with the holder for the bulb is depressed, or in my case it was cracked. You can use a small flat scewdriver to lift the metal in the tail light assembly, or as i did, i just put some tin foil on top of the metal, then reinstalled the bulb and holder ontop of the tin foil (this makes the elec. connection). seems like a rigged up solution, but made sense to me, and worked!

Dec 18, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
2003 Dodge Durango Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...