Question about 1996 Dodge Neon

1 Answer

2003 Dodge Neon - All dash gauges work intermittently

For the last 6 months the dash gauges including the speedometer work intermittently. They all work or none work at the same time. It appears there may be something loose. What is the problem and recommended repair procedure. i have a 2003 sx 2.0 neon dash cluster stop working spedometer fuel and tempatur only stoped working what would be the problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Replace the circuit board in the cluster.

Posted on May 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 03 neonsxt dodge went 2 start it battery was very low put my charger on it called napa 2 get a new one started fine but the tac&speedometer went backwards now thay dont work rest of ...


Hold the trip button in and turn key on while holding trip button. U may have to hold trip button up to 10 seconds. This will self test the dash and flip gauges back

Apr 16, 2013 | 2003 Dodge Neon

2 Answers

Speedometer of 2003 dodge neon does not work and gas gauge is jumpy. replaced 2 input and output vss sensors and still won't work. no codes show on scanner


some of these have had problems with the dash assembly causing alot of problems with gauges and lights and speedometers.if there are no codes in the computer and weren`t any before you replaced the vss sensors then you spent money you didn`t need to.

Mar 18, 2011 | 2003 Dodge Neon

1 Answer

97 Dodge Neon, Dash guages not working? The


I know your fuses look good but try replacing the fuse with a new one.

Aug 27, 2009 | 1997 Dodge Neon

1 Answer

2003 dodge neon speedometer not working and shows that the alternator is not charging.


test the alt but my best bet replaceing the cluster all neons are cold solderd and come loose causing the problem to make dash gauges to intermit work and also quit working all together

Jun 07, 2009 | 1995 Dodge Neon

1 Answer

1996 Dodge Neon - All dash gauges work intermittently


The problem is broken solder connections on the instrument panel circuit board. Now here's how to fix it: Lift up & remove dash pad/gauge cluster trim. Remove 4 phillips screws to remove gauge cluster. Turn gauge cluster over, remove 6 T15 Torx screws, & remove black paper. Remove 5 more T15 screws for the circuit board & 4 T15 screws at the wiring harness connectors. Disconnect the gray odometer cable; just push in the little pin and slide it out. After all the screws are out, gently lift up on the circuit board; you may need to lift up on one side at a time. BE VERY CAREFUL! After you remove the circuit board, flip it over (you will see the dash lights). There are two areas with 10 soldered pins (two rows of 5 pins) & a black dot above & below it. If you look at these pins closely, you may see the broken solder. Apply heat from a soldering iron to these pins; you shouldn't have to add more solder, but you may. As it heats, the old solder will become shiny & melt. Remove heat. This should be enough to repair those connections. Look at the solered pin; if you see a crack in the solder around the pin, heat it up again & apply a small amount of solder. After you reheat/resolder those pins, let it cool. Then reassemble the gauge cluster. It sounds tougher than it really is. Just be gentle & work carefully. You'll be fine, & your gauges will work again.

Mar 14, 2009 | 1996 Dodge Neon

Not finding what you are looking for?
1996 Dodge Neon Logo

867 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...