Question about 1994 Chevrolet Caprice Classic

1 Answer

No power tp the fuel pump, injectors not pulsing, no fuel.

1990 chevy caprice 5.0l,TBI, injectors not pulsing and fuel pump not getting power? any suggestions?

Posted by on

  • Anonymous Mar 25, 2014

    No Spark from coil
    Injectors are not firing
    Fuel Pump is not kicking on.
    ECU Code 1-2, No reference pulses to the PCM (Normal)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

Check out your oil sending unit, fuel pump and relay, check for power (might be a fuse), the ignition control module (which if you remove it, can be tested for free at AUTO-ZONE), any related wiring, pick-up coil (inside the distributor), and possibly the ignition switch. If I can be any more help just as away.

Posted on Jun 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1990. Is there an access hole in the trunk to remove fuel pump?


Chevy Caprice 305 TBI Fuel pump AC Delco EP375.avi ...

? 0:54
www.youtube.com/watch?v=A39lqWe1sm8
Jun 8, 2010 - Uploaded by 921VORON
Caprice 93 Fuel pump AC Delco EP387 (originally) replace to EP375 (B 4.3W(L99) (1994-1996))

Sep 30, 2015 | Chevrolet Caprice Cars & Trucks

2 Answers

91 chevy 1500 p u the tbi is not spraying fuel out the 2 injectors spray starting fluid in the throttle body and it will start


Check all engine grounds as the ECU relies on the control unit to find a ground and pulse the injectors. Also check the crankshaft sensor to make sure its pulsing when rotated. It should produce a 5 volt reference as it moves. Also check that you have fuel pressure as the pump also relies on a good ground to power up. Everything is controlled from the ECU.

May 06, 2014 | Cars & Trucks

1 Answer

1989 caprice with 350 tbi injectors won't pulse anymore


If you have spark, the computer is getting the signal to pulse the injectors.
If you have power but no ground pulse, you may have fried the driver in the computer again.
You could get a used computer from a junk yard to test it.
There could be a short in one of the injectors or the harness at the computer, or a break in the circuit from the computer, and that could kill the driver in the computer.

Jan 18, 2013 | Cars & Trucks

1 Answer

I have a 1990 chevy s 10 with a 4.3 engine it starts when cold will idle a few minutes then dies as a result of not getting fuel if I pour gas down the throttle body it will restart but only run l,ong...


Could be loosing power or pulse to the injectors. I would check for power and pulse ground at the injectors and see if you are loosing one or both.

Dec 24, 2012 | 1990 Chevrolet S 10 4WD

1 Answer

1990 dodge dakota 2.3 v-6 auto-----just put new fuel pump and filter, and everything back to normal but still not getting fuel to tb inj.? cranks over but still nothing.---i can pour gas directly in and...


2.3 V-6? You should be a 2.5 V-6 whether you have a TBI (throttle body injector) or sequencial, If there is no injector pulse then move your inspection to the distributor, there you will see a distributor pick up, this controls spark and fuel, and yes the rule is if there is no spark then there is no fuel but you case is special you have spark and no fuel pulse,you will need to inspect this for corrosion as it can give spark and no fuel injector pulse,that is one area of no injector pulse, Then inspect the MAP sensor (your a spped density), the most common complaint for a map sensor is it start then dies. inspect this sensor its mounted on the firewall make sure the vacuum hose is connected, and that it is plugged in.

May 22, 2011 | 1990 Dodge Dakota

1 Answer

I have a 1993 chevy s10 4.3l TBI that will not start.


Make sure the injectors are pulsing. Whatch to make sure mists oj fuel are coming out.

Apr 01, 2010 | 1993 Chevrolet S-10

1 Answer

1988 chevy 1/2 ton and i cant get fuel to the TBI injector . the fuel pump works and the fuel filter is clear and it turns over but it wont start what do i check to fix the problem help


Replace the pick up coil if there is fuel to the injector.If there is fuel pressure at the injector,then it is the pick up coil.If the fuel pump is working,and the fuel filter is new,then there is fuel at the injector,just no pulse,correct?

Jan 14, 2010 | 1988 Chevrolet C1500

2 Answers

Need help with this 93 astro van


Have you checked for injector pulse with a noid light at the injector connector? You could have a bad ecm.

Aug 12, 2009 | 1993 Chevrolet Astro

Not finding what you are looking for?
1994 Chevrolet Caprice Classic Logo

709 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...